KitchenAid KUDH03DTSS3, KUDH03DTBL3, KUDD03DTWH3, KUDD03DTSS3, KUDD03DTPA3 Installation Guide

...

I_itc enAid _

DRAWER DISHWASHER

INSTALLATION INSTRUCTIONS

INSTRUCCIONES DE INSTALACION

DE LA LAVAVAJILLAS DE CAJON

INSTRUCTIONS D'INSTALLATION

LAVE-VAISSELLE A TIROIR(S)

Table of Contents/Jndice/Table des matieres .................................................................. 2

iMPORTANT:

Save for local electrical inspector's use. Installer: Leave installation instructions with the homeowner.

Homeowner: Keep installation instructions for future reference.

IMPORTANTE:

Guarde para tenerlas a disposici6n del inspector de electricidad local. Instalador: Deje las instrucciones de instalaci6n con el propietario.

Propietario: Conserve las instrucciones de instalaci6n para referencia futura.

iMPORTANT :

Conserver pour consultation par I'inspecteur local des installations 61ectriques. Installateur : Remettre les instructions d'installation au propri6taire.

Propri6taire : Conserver les instructions d'installation pour r6f6rence ult6rieure.

W10300220B

TABLE OF CONTENTS

DISHWASHER SAFETY .............................................................................. 3

INSTALLATION REQUIREMENTS ............................................................ 4

Tools and Parts ........................................................................................ 4

Location Requirements ............................................................................ 5

Water Supply Requirements .................................................................... 5

Electrical Requirements ........................................................................... 6

Drain Requirements ................................................................................. 6

INSTALLATION INSTRUCTIONS .............................................................. 7

Unpack Dish Drawer ................................................................................ 7

Prepare Cabinet Opening ........................................................................ 7

Prepare Dishwasher ................................................................................. 8

Route Electrical Wiring ............................................................................. 9

INDICE

SEGURIDAD DE LA LAVAVAJILLAS ...................................................... 19

REQUlSITOS DE INSTALACION ............................................................. 20

Piezas y herramientas ............................................................................ 20

Requisitos de ubicaci6n ........................................................................ 21

Requisitos del suministro de agua ........................................................ 21

Requisitos electricos .............................................................................. 22

Requisitos de desagQe .......................................................................... 22

INSTRUCCIONES DE INSTALACION ..................................................... 23

Desempaque el caj6n para platos ......................................................... 23

Prepare la abertura del armario ............................................................. 23

Prepare la lavavajillas ............................................................................. 24

Dirija el cableado electrico ..................................................................... 25

Route Water Supply Line and Drain Hose ............................................ 10

Connect Water Supply Line and Drain Hoses ...................................... 11

Make Electrical Connection ................................................................... 12

Install Trim Pieces and Level Dishwasher ............................................. 13

Secure Dishwasher ................................................................................ 15

Complete Installation ............................................................................. 16

CUSTOM PANEL INSTALLATION INSTRUCTIONS ............................. 17

Custom Drawer Panel ............................................................................ 17

Preparing Custom Panel ....................................................................... 17

Install Panel Fasteners ........................................................................... 18

Mount the Custom Panel ....................................................................... 18

C6mo dirigir la linea de suministro de agua y la manguera

de desagOe ............................................................................................ 26

Conecte la linea de suministro de agua y las mangueras

de desagOe ............................................................................................ 27

Conexi6n del suministro electrico ......................................................... 29

Instale las piezas de adorno y nivele la lavavajillas ............................... 30

Asegure la lavavajillas ............................................................................ 32

Complete la instalaci6n ......................................................................... 33

INSTRUCCIONES DE INSTALACION DEL PANEL A LA MEDIDA ...... 34

Panel del caj6n a la medida .................................................................. 34

Preparaci6n del panel a la medida ........................................................ 34

C6mo instalar los sujetadores del panel ............................................... 35

C6mo montar el panel a la medida ....................................................... 35

TABLE DES MATIERES

SI_CURITI_ DU LAVE-VAISSELLE ........................................................... 36

EXIGENCES D'INSTALLATION ............................................................... 37

Outillage et composants ........................................................................ 37

Exigences d'emplacement .................................................................... 38

Specifications de I'alimentation en eau ................................................. 38

Sp6cifications electriques ...................................................................... 39

Exigence d'evacuation ........................................................................... 39

INSTRUCTIONS D'INSTALLATION ........................................................ 40

Deballage du lave-vaisselle ................................................................... 40

Am_nagement de la cavit6 d'encastrement du placard ....................... 40

Pr6paration du lave-vaisselle ................................................................. 41

Installation du c&blage _lectrique .......................................................... 42

Acheminement du conduit d'alimentation en eau et du tuyau

de vidange .............................................................................................. 43

Raccordement du conduit d'alimentation en eau et des tuyaux de

vidange .................................................................................................. 44

Raccordement du circuit electrique ...................................................... 46

Installation des pieces de garniture; etablissement de I'aplomb

du lave-vaisselle .................................................................................... 47

Arrimage du lave-vaisselle ..................................................................... 49

Achever I'installation .............................................................................. 49

INSTRUCTIONS D'INSTALLATION DU PANNEAU PERSONNALISI_. 50

Panneaux des tiroirs personnalis_s ...................................................... 50

Preparation du panneau personnalise .................................................. 51

Installation des dispositifs de fixation du panneau ............................... 51

Montage du panneau personnalise ....................................................... 51

DISHWASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen ifthe instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

• Read all instructions before using the dishwasher.

• Use the dishwasher only for its intended function.

• Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.

• When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.

• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

• Do not touch the heating element during or immediately after use.

• Do not operate the dishwasher unless all enclosure panels are properly in place.

SAVE THESE INSTRUCTIONS

[] Do not tamper with controls. [] Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

[] To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

[] Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

[] Remove the door or lid to the washing compartment

when removing an old dishwasher from service or discarding it.

Do not open dishwasher drawer until dishwasher is inside the cabinet opening. if the dishwasher is not in the cabinet opening, slowly open the drawer while someone grasps

the rear of the dishwasher. Failure to follow these instructions can result in death or serious injury.

You need to:

• Slowly open dishwasher drawer while someone grasps the rear of the dishwasher. Remove shipping materials. Close

dishwasher drawer. Latch the dishwasher drawer shut.

• Observe all governing codes and ordinances.

• Install this dishwasher as specified in these instructions.

Tip Over Hazard

Have everything you need to properly install dishwasher. Contact a qualified installer to ensure that dishwasher is

installed to meet all electrical and plumbing national and local codes and ordinances.

INSTALLATION REQUIREMENTS

_4_9 __ _J_ _'__

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed

here.

Tools Needed

• Pliers

• Phillips screwdriver

• Flat-blade screwdriver

• ¾e" and 1¼,,nut drivers or hex sockets

• Measuring tape or ruler

• 1Y2" hole saw bit

• 10" adjustable wrench

• Utility knife

• Level

• Cordless drill

• V8"drill bit

• Security T-20 TORX®tdriver (on some models)

Parts Supplied

Check that all parts are included.

Pa_s Needed

A. 72" (182.9 cm) flexible water supply fine B. Zip tie C. Appropriate sized UL Listed wire connectors (2)

A. _" UL Listed/CSA Approved

strain relief

B. 1.25" hose clamp C. Mounting bracket screws (8) D. Unit mounting screws (4)

E.Drain hose connector F. Mounting brackets (4)

G. Drain connector spring clamps (2)

H. Trim strips (2)

I. Toe kick brackets (2)

J. Toe kick bracket screws (2)

K. Toe kick trim

L. Panel fasteners (on some

models) (2)

M. TORX®tscrews (on some

models) (10)

N. Drain hose

1-®TORX is a registered trademark of Acument Intellectual Properties, LLC

Installation Clearances

IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or

electrical shock. Proper installation is your responsibility.

• Contact a qualified installer to ensure that the dishwasher is installed to meet all electrical and plumbing national and local

codes and ordinances.

• Install the dishwasher as specified in these instructions.

• Have everything you need to properly install dishwasher.

• Avoid damage from freezing to dishwasher and water lines leading to dishwasher. Damage from freezing is not covered

by the warranty.

• This dishwasher is manufactured for indoor use only.

• Install and level dishwasher on a floor that will hold the weight, and in an area suitable for its size and use.

Product Dimensions

24,, .... 23 ,,

(61 cm)

Cutout Dimensions

................................................................................................................................................../

(61 cm)

Preferred Utility Area

48.9 cm)

11/2"

(3.75 cm)

(13 crn)

333/4"

(85.7 cm)

A. Left-hand or right-hand water connection route

B. Left-hand or right-hand electric connection and drain route

NOTE: All holes should be drilled at 1V2" (3.8 cm) diameter.

• A hot water line with 20 to 120 psi (138 to 862 kPa) water pressure.

• 120°F (49°C) water temperature at dishwasher.

• Flexible stainless steel braided fill line (1/2"minimum plastic tubing is not recommended).

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected dishwasher: The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and

grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or

service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the

plug provided with the dishwasher; if it will not fit the

outlet, have a proper outlet installed by a qualified electrician.

[]

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal, permanent wiring system, or an equipment-

grounding conductor must be run with the circuit conductors and connected to the equipment-

grounding terminal or lead on the dishwasher.

You must have:

• 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply.

• Copper wire only.

We recommend:

• A time-delay fuse or circuit breaker.

• Aseparate circuit.

If direct wiring dishwasher:

• Use flexible, armored or nonmetallic sheathed, copper wire with grounding wire that meets the wiring requirements for your home and local codes and ordinances.

• Use strain relief method provided with house wiring junction box or install a UL Listed/CSA Approved clamp connector to

the house wiring junction box. If using conduit, use a UL Listed/CSA Approved conduit connector.

If connecting dishwasher with a power supply cord:

• Use Power Supply Cord Kit (Part Number 4317824) marked for use with dishwashers. Kit contents include:

• Voltex, Inc., UL Listed 16-gauge 3 wire power supply cord

with 3 prong grounded plug.

• Neer C-500 7/8"strain relief.

• 3 wire connectors.

• Part Number 302797 grommet. Follow the kit instructions for installing the power supply cord.

• Power supply cord must plug into a mating three prong, grounded outlet, located inthe cabinet next to the dishwasher

opening. Outlet must meet all local codes and ordinances.

IMPORTANT: If you plan to install a garbage disposer, an additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply is required.

Use the new drain hose supplied with your dishwasher. If this is not long enough, use a new drain hose with maximum

length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher.

Connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or

be connected to an air gap.

Drain Air Gap

SAVE THESE INSTRUCTIONS

Contact a qualified electrician. Ensure that the electrical installation is adequate and in

conformance with all national and local codes and ordinances.

Use a drain air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above the subfloor or floor.

Use 1/2"(1.3 cm) minimum I.D. drain line fittings.

INSTALLATION INSTRUCTIONS

2. Drill 1Y2"(3.8 cm) diameter holes for drain and water hoses and electrical wiring as shown. Holes should be placed 1/2"(1.3 cm) from back wall.

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit

breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

2. Turn off water supply.

Excessive Weight Hazard

Use two or more people to move and install

dishwasher. Failure to do so can result in back or other injury.

1. Read valuable information on exterior of shipping box before opening.

2. Remove shipping materials, tape and film from the dishwasher. Remove parts package from inside the dishwasher.

1/2"

_(1.3cm)

A. Choose left-hand or right-hand water hose route. B. Choose left-hand or right-hand electric wire and drain route.

Wood cabinet: Sand the hole until smooth. Metal cabinet: Cover hole with grommet (Part Number 302797,

provided with cord kit).

3. Install mounting brackets 17" (43.2 cm) from floor using screws provided. If needed, drill 1/8"pilot holes in cabinet.

1. To ensureminimum clearancedimensionsexist:

• Measure thedistancefromthe cabinetcountertoptothe floorand ensure333/4''(85.7cm) minimum height.

• Measure thedistancefromthe frontof thecabinettothe

back wall and ensure 24" (61 cm) minimum depth.

• Measure the distance from the left-hand side to the right- hand side of opening and ensure 24" (61 cm) minimum

width.

17"

(43.2 cm)

4. Decide which dishwasher-to-counter attachment method will be used.

Option 1: Solid surface countertop installation

• Install second set of mounting brackets 331/2"(85 cm) from floor. If needed, drill 1/8"pilot holes in cabinet.

Option 2: Wood countertop installation

• Prepare dishwasher by folding over tabs located on the top front as shown.

........ _ ....

Tip Over Hazard

Do not open dishwasher drawer until dishwasher is inside the cabinet opening.

if the dishwasher is not in the cabinet opening, slowly

open the drawer while someone grasps the rear of the dishwasher.

Failure to follow these instructions can result in death or serious injury.

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1. Measure cabinet opening height from floor to bottom of countertop.

2. Using two or more people, place corner packaging on the floor and place dishwasher on its back.

3. Adjust leveling legs based on the cabinet opening measurement and the chart below.

:::::!!!!!!!!!!!!....

-E

Option 1: Right-Hand Side Utility Route

H :X 33 _" (86 cm) : 0"

34" (86.3 cm) : _" (0.3 cm)

34 _" (86.7 cm) :¼" (0.6 cm) 34 _" (87 cm) : _" (1 cm) 34_" (87.3 cm) :V2" (1.3 cm)

34½" (87.6cm) 34_" (87.9 cm) 34_" (88.3 cm) 34_" (88.6 cm) 35" (88.9 cm)

:X :_" (1.6 cm)

:%" (1.9 cm) :_" (2.2 cm) :1" (2.5 cm) :1 _" (2.9 cm)

4. Place dishwasher in upright position.

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit

breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Follow all national and local codes and ordinances for completing electrical supply to cabinet.

Route wire through 1V2" (3.81 cm) hole located 8" (20.32 cm) above the

floor.

After routing the electrical wire through the right-hand hole, attach the wire to back left-hand side of cabinet wall 8" (20.32 cm) above the floor. Then continue routing the wire along the left-hand side of cabinet opening to the front of the opening.

Option 2: Left-Hand Side Utility Route

Route wire through 1V2"(3.81 cm) hole located 8"

(20.32 cm) above the floor.

After routing the electrical wire through the left-hand hole, continue routing the wire along the left-hand side of cabinet to the

front of the opening.

k_,"__" _ _e_ S_:_p_t_J_ _ _ L,:i:_e2_d __.......i_ ......

Connect water supply line to water valve on dishwasher.

Slide clamp onto drain hose, and then push hose into "Y" connector until fully seated. Several clicks will be heard.

Option 1: Right-Hand Side Utility Access

• For right-hand routing, place the water supply line in the clips.

3. Slide clamp into position over the "Y" connector.

• Route drain hose on clips on bottom/back of unit.

Option 2: Left-Hand Side Utility Access

• For left-hand routing, place hose in clip on bottom right- hand side of the dishwasher.

• Route water supply line and drain hoses into the cabinet.

Slide clamp into position (figures C and D).

A B

• Slide dishwasher partway into the cabinet opening. Allow for access to the electrical terminal box.

5. Connect the drain hose using one of the following options:

Option 1: Waste Disposer No Drain Air Gap

A C

I I = ........

Connect water supply line to the water valve under the sink.

A. Hot water supply

Slide clamps onto drain hoses (Figure A). Do not cut drain hoses.

Push hose into drain connector until fully seated (Figure B). Several "clicks" will be heard.

A. For new construction, remove disposer plug. B. Connect drain connector to waste disposer.

C. Tighten clamp.

NOTE: This connection must be before the drain trap and at least 20" (50.8 cm) above the floor where the dishwasher will be

installed. It is recommended that the drain hose be looped up and securely fastened to the underside of the counter.

Option 2: No Waste Disposer and Drain Air Gap

A. Drain air gap B. Drain hose connector C. Waste

Option 3: Waste Disposer and Drain Air Gap

A ........................

B .............

A.Drain air gap B.Drain hose connector

C. Waste

Option 4: No Waste Disposer, No Drain Air Gap

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

1. Remove screw securing the electrical box cover. Remove cover.

A. Drain hose connector

B. Waste

NOTES:

• Attach the drain hose connector to the water waste line using the supplied hose clamp.

This connection must be before the drain trap and at least 20" (50.8 cm) above the floor where the dishwasher will be installed. It is recommended that the drain hose be looped up and securely fastened to the underside of the counter.

6. Turn on water and check for leaks.

2. Route electrical wires through strain relief and secure to electrical plate.

Electrical Shock Hazard

Electrically ground dishwasher. Connect ground wire to green ground connector in

terminal box.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

3. Connect wires as follows using twist-on connectors sized to

connect direct wire to 16-gauge dishwasher wire.

Power supply wire: Terminal box wire:

white white

black black

5= Reinstall electric box cover with all wires contained inside the

terminal box.

NOTE: Do not plug into outlet until instructed to do so.

ground wire _ _ ground connector

4. Attach ground wire to the green ground screw. \

A. Attach ground wire to green screw.

B.Attach white and black wires.

1. Open bottom drawer.

2. Push in clips and slide rails back 5" (12.7 cm).

3. Lift drawer off slide rails. Place drawer off to the left on covering. Slide rails into dishwasher.

4. Slide the dishwasher into position in the cabinet opening. Check that the drain hose and electrical wiring are not kinked.

5. Check left to right level by placing the level on the top of the drawer. Check front to back level by placing level on the slide

rails.

Adjust legs with a 3/le"socket wrench to level the dishwasher.

8. Attach the toe kick bracket to the frame.

9. Place the trim strip into the toe kick bracket.

A. Adjust legs.

Rest the trim strip on the floor and mark the trim at the top of the frame flange height. Pick the closest groove to the mark. If the mark is between 2 grooves, choose the groove that makes

the trim strip the shortest. On a covered surface, cut the trim strip at the selected groove. Pull dishwasher back out of cabinet opening about 6" (15.24 cm)

10. Attach the toe kick bracket on the opposite side.

11. Place the flexible side trim strips on both sides as shown.

3. Attach dishwasher to upper cabinet mounting brackets.

Option 1: Solid surface countertop

Attach dishwasher to the side cabinet mounting brackets (installed earlier).

12. Slide the dishwasher back into position in the cabinet opening. Check that the drain hose and electrical wiring are

not kinked.

Remove top drawer (same procedure as followed to remove bottom drawer) and set drawer on bottom drawer separated with corner packaging.

Attach dishwasher to the lower cabinet mounting bracket (installed earlier).

A.Attach dishwasher to side cabinet mounting brackets.

Option 2: Wood countertop

Attach the dishwasher to the countertop using the folded over mounting tabs located on the top of the dishwasher.

A. Attach dishwasher to countertop using folded over mounting tabs.

A. Attach dishwasher to lower cabinet mounting bracket.

Pull top drawer slide rails out and set top drawer on slide rails.

4. In the cabinet under the sink, coil excess drain hose and wrap with a zip tie.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

2. Pull slide rails forward until they snap into position.

3. Push top drawer in and repeat above steps for bottom drawer.

Failure to follow these instructions can result in death,

fire, or electrical shock.

5. Plug in dishwasher or reconnect the power.

6. Select the Rinse Only cycle and press START/RESUME. Allow the dishwasher to fill, rinse and drain. Check for leaks. If leaks

are found, secure the connection and repeat this step.

If you need Assistance or Service:

Please reference the "Assistance or Service" section of the User Instructions or contact the dealer from whom you purchased your

dishwasher.

+ 36 hidden pages