Kitchenaid KSRT25CR Dimension Guide

Refrigerator

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

LOCATION REQUIREMENTS

KSRT25CR

Electrical: A 115 Volt, 60 Hz., AC only 15 or 20
amp fused, grounded electrical supply is required.
It is recommended that a separate circuit serving
only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use
an extension cord.

Water: Connect the ice maker to a cold water line
with water pressure between 30 and 120 psi (207­827 kPa).

If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the system needs to be a minimum of
40 to 60 psi (276 - 414 kPa).

IMPORTANT: The pressure of the water coming
out of a reverse osmosis system going to the
water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 - 827 kPa).

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

Ref. 2318410

02-13-06

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space
on each side and at the top.

Allow at least 1" (2.5 cm) between back of cabinet and the wall.
If your refrigerator has an ice maker, make sure you leave some extra space at the

back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2" (5.08 cm)

minimum on the hinge side (depending on your model) to allow for the door to
swing open.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor
in a location where the temperature will fall below 55°F (13°C).

E

**

overall

D

**

top of

cabinet

C

B

*overall, to back of coils, not including handle

**includes rollers extended 3/4"

A

*

Depth Cab. Width Door Width Cab. Height Overall Height

Model "A" "B" "C" "D" "E"

KSRT25CR 33 1/4" 35 1/2" 36" 67 7/8" 70 1/4"

®

1

1

/

2

" (1.25 cm)

2" (5.08 cm)