Kitchenaid KRMF606ESS, KRMF706EBS Dimension Guide

PRODUCT MODEL NUMBERS
cabine
KRMF606E KRMF706E
Electrical: A 115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be pro­vided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
Water: A cold water supply with water pressure between 35 and 120 psi (241 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.
NOTE: If the water pressure is less than what is required, the flow of water from the water dispenser could decrease or ice cubes could be hollow or irregular shaped.
Reverse Osmosis Water Supply: IMPORTANT: The pressure of the water
supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).
Bottom Mount Refrigerator
PRODUCT DIMENSIONS
F
E
cabinet
D
not incl.
handle
C
B
top of
Model Size
25.8
incl.
handle
t
Height -
Overall
“A”
70¹⁄,"
(178.1 cm)
Height -
Top of
Cabinet
“B”
68³⁄,"
(173.7 cm)
Depth -
With Handles
“C”
36¹⁄₄"
(92.1 cm)
overall
Depth ­Without
Handles
“D”
34¹⁄₂"
(87.7 cm)
A
Depth -
Cabinet Only
“E”
29"
(73.7 cm)
Width -
Cabinet
“F”
36"
(91.4 cm)
LOCATION REQUIREMENTS
¹⁄₂
" (1.25 cm)
3³⁄₄
" (9.5 cm)
IMPORTANT: This refrigerator is designed for indoor, household use only.
To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for a 1" (2.54 cm) space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 3³⁄₄" (9.5 cm) minimum space between the refrigerator and wall to allow the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.
Ref. W10730912A
3/15
Loading...