KitchenAid KHTU705R, KHTU765S, KHTU765R, KHTU705S User Manual 2

®

30” and 36” Range Hoods

PRODUCT MODEL NUMBERS

KHTU705R
KHTU765R

KHTU705S
KHTU765S

Electrical: 120-V, 60-Hz, AC-only, 15 amp.
electrical supply. Use copper wire only. A time­delay fuse or circuit breaker and separate circuit is
recommended.

INSTALLATION CLEARANCES

30”(76.2 cm) or

36” (91.4 cm) min.

cabinet opening width

24” (61 cm) min.

30” (76.2 cm)
suggested max.
bottom of hood

to cooking surface

18” (45.7 cm)
min. clearance
upper cabinet
to countertop

36” (91.4 cm)

countertop

height

70 ⁵⁄₁₆"

(178.6 cm)

min.

76 ⁵⁄₁₆"

(193.8 cm)

max.

to bottom of

cabinet frame

OVERALL DIMENSIONS

5 ⁷⁄₈" (14.9 cm) dia.

exhaust collar

Interchangeable

9 ¹⁵⁄₁₆"

(25.2 cm)

20 ³⁄₁₆”

(51.3 cm)

front trim

29 ¹⁵⁄₁₆” (76.0 cm) - 30” (76.2 cm) model
35 ¹⁵⁄₁₆” (91.3 cm) - 36” (91.4 cm) model

VENT AND ELECTRICAL OPENINGS AND MOUNTING
SCREW LOCATIONS

(3.2 cm)

1⁵⁄₁₆”

(3.3 cm)

1¹⁄₄”

1⁵⁄₁₆”

(3.3 cm)

Electrical
knockouts

5⁷⁄₈”

(14.9 cm)

dia.

Centerline of
exhaust collar

7¹⁄₂”

(19.0 cm)

Centerline of

hood

9¹⁄₈”

(23.2 cm)

1³⁄₁₆”

(3.0 cm)

3⁵⁄₁₆”

(10.0 cm)

VENTING REQUIREMENTS

This range hood is factory set for vented installations. Vent system
can terminate through either the roof or a wall. The vent system
length should not exceed 35 ft (10.7 m)

It is recommended that you use round vent instead of rectangular
vent, especially if elbows are required.

For best performance, use no more than three 90° elbows. If more
than one elbow is used, make sure that there is a minimum of 24
inches (61 cm) of straight vent between any two elbows. Do not
install two elbows together.

To calculate the length of system you need, add the equivalent

feet (meters) from chart below for each vent piece that will be
needed.

Determine the length of the vent system you need

To calculate the length of the vent system you need, add the
equivalent feet (meters) from chart below for each vent piece that
will be needed.

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifi cations without notice.

Recommended standard 6” (15.2 cm) fi ttings

1 ft. round=
1 ft. (0.3 m)

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifi cations subject to change without notice.

90° elbow=
5 ft. (1.5 m)

45° elbow=

2.5 ft. (0.8 m)

Ref. 9763384
09-11-06