KitchenAid KGRS308BSS2, KGRS308BSS1, KGRS306BSS2, KGRS306BSS1 Owner’s Manual
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.kitchenaid.com for additional information. If you still need assistance, call us at 1-800-422-1230.
InCanada, visit our website at www.kitchenaid.ca or call us at 1-800-807-6777 for additional information.
You will need your model and serial number, located on the oven frame behind the top right side ofthe oven door.
Paraobtener acceso a "lnstrucciones parael usuario de la estufa a gas" en espa_ol, o para obtener informaciGn adicional acerca de
su producto, visite:www.kitchenaid.com
Debera tenet a mano el nQmero de modelo y de serie, que estan ubicados en el marco del homo, detras del lado derecho superior
de la puerta del homo.
Table of Contents
RANGE SAFETY ....................................................................................... 2
The Anti-Tip Bracket ............................................................................. 3
FEATURE GUIDE ..................................................................................... 4
COOKTOP USE ........................................................................................ 6
Grates .................................................................................................... 7
Griddle ................................................................................................... 7
Sealed Surface Burners ........................................................................ 7
Burner Size ............................................................................................ 8
Cookware .............................................................................................. 8
Home Canning ...................................................................................... 9
OVEN USE ................................................................................................ 9
Electronic Oven Controls ...................................................................... 9
Sabbath Mode .................................................................................... 10
Aluminum Foil...................................................................................... 11
Positioning Racks and Bakeware ....................................................... 11
Split Oven Rack (on some models) .................................................... 11
Roll-Out Rack ...................................................................................... 12
Oven Vent............................................................................................ 12
Baking and Roasting ........................................................................... 13
Broiling ................................................................................................ 13
Convection Cooking ........................................................................... 13
EasyConvect" Conversion .................................................................. 14
Cook Time ........................................................................................... 14
Proofing Bread .................................................................................... 14
Warming Drawer (on some models) ................................................... 15
Slow Cook (on some models) ............................................................. 15
RANGE CARE ......................................................................................... 16
Clean Cycle ......................................................................................... 16
General Cleaning ................................................................................. 17
Oven Light ........................................................................................... 18
TROUBLESHOOTING ............................................................................ 18
ACCESSORIES ...................................................................................... 20
WARRANTY ............................................................................................ 21
W10524723A
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death,
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance,
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or
the gas supplier,
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the "What to do if you smell gas" instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
Therangewill not tipduringnormaluse.However,therangecantip ifyouapplytoomuchforceorweighttotheopendoorwithouttheanti-
tip bracketfasteneddownproperly.
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
"''Bracket
Anti-Tip
Range Foot
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
• See installation instructions for details.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
• WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER
ANTI-TIP BRACKET.
• WARNING: NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the oven.
• WARNING: NEVER cover any slots, holes or passages
in the oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks air flow through the
oven and may cause carbon monoxide poisoning.
Aluminum foil linings may also trap heat, causing a fire
hazard.
• CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range -
children climbing on the range to reach items could be
seriously injured.
• Proper Installation - The range, when installed, must be
electrically grounded in accordance with local codes or, in
the absence of local codes, with the National Electrical
Code, ANSI/NFPA 70. In Canada, the range must be
electrically grounded in accordance with Canadian
Electrical Code. Be sure the range is properly installed and
grounded by a qualified technician.
• This range is equipped with a three-prong grounding plug
for your protection against shock hazard and should be
plugged directly into a properly grounded receptacle. Do
not cut or remove the grounding prong from this plug.
• Disconnect power before servicing.
• Injuries may result from the misuse of appliance doors or
drawers such as stepping, leaning, or sitting on the doors
or drawers.
• Maintenance - Keep range area clear and free from
combustible materials, gasoline, and other flammable
vapors and liquids.
• Storage in or on the Range - Flammable materials should
not be stored in an oven or near surface units.
• Top burner flame size should be adjusted so it does not
extend beyond the edge of the cooking utensil.
For self-cleaning ranges -
• Before Self-Cleaning the Oven - Remove broiler pan and
other utensils. Wipe off all excessive spillage before
initiating the cleaning cycle.
SAVE THESE INSTRUCTIONS
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked
Questions (FAQs) section of our website at www.kitchenaid.com for more detailed instructions. In Canada, refer to the Customer Service
section at www.kitchenaid.ca.
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Proof I KeepWarm
©©©
QC)C)
_:_o_a, P,z,oMoo,so,,o_
©QQ
@©@
control Lock
Hold 3 Sec
KEYPAD FEATURE INSTRUCTIONS
CLOCK Clock This clock can use a 12- or 24-hour cycle. See "Electronic Oven Controls" section.
1. Press CLOCK.
2. Press "3" for AM or "6" for PM.
3. Press the number keypads to set the time of day.
4. Press START.
OVEN LIGHT oven cavity light While the oven do0i is cloSed, press the OVEN LIGHT keYpad to turn the !ight 0nand Off. The
oven !ight wi!! come on when the oven door is opened,
TIMER Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
SET/OFF 1. Press TIMER.
2. Press the number keypads to set the length of time in hr-min-min. Leading zeroes do not
have to be entered. For example, for 2 minutes, enter "2."
3. Press TIMER to begin the countdown. If enabled, end-of-cycle tones will sound at end of
countdown.
4. Press TIMER to cancel the Timer and return to the Time of Day. Do not press the Off keypad
because the oven will turn off.
START Cooking start The Start pad beginS any oven functionl !f Start is not pressed Within 2 minUtes after pressing a
OFF Range function The Off keypad stops any oven function except the Clock, Timer, Control Lock, and Warming
BAKE Baking and
BROIL Broiling 1. Press BROIL.
roast ng
i Press the number keypads t0 set a temperature other than 350 F(i77 C)in 5 inCiements
keypad, the function is canceled and the time of day is displayed,
Drawer or Slow Cook Drawer (on some models).
between !70QFand 500 F(77 C and 260 C).
3' Press START.
To Change the temperature, repeat step 2 Press START for the change to take effect.
5, Press OFF when finished,
2. Select the broiling temperature by pressing 1 - high (500°F [261°C]), 2 - medium (450°F
[234°C]) or 3 - low (400°F [204°C]).
3. Press START and allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven and close the door.
5. Press OFF when finished.
KEYPAD FEATURE INSTRUCTIONS
CONVECT ROAST Convection
cooking
CONVECT BROIL convection 11 Press CONVECT BROIL /
cook ng
i Press the number keypads to set a temperature othei than 450 F (234 C)in5 inCiements
EASYCONVECT Recipe
CONVERSION conversion for
BREAD PROOF Proofing bread 1. Press BREAD PROOE until the desired pi00f is displaYed ('!Standard Pro0f" or '!Rapid
convection
cooking
1. Press CONVECT ROAST.
2. Press the number keypads to set a temperature other than 325°F (162°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
o o 0
between 170 F and 500 F (77 C and 260 C).
3' Press START.
4, To change the temperature, repeat ste p 2: Press START for the change t0 take effect.
5. Press OFF When finished.
NOTE: For best results, preheat your oven to the required temperature prior to using
EasyConvect TM Conversion. After preheating is complete, press the OFF key before using
EasyConvect TM Conversion.
1. Press the appropriate EasyConvect TM key (MEATS, PIZZA, BAKED GOODS or OTHER).
2. Press the number keypads to enter the standard cooking temperature, then press START.
3. Press the number keypads to enter the standard cook time, then press START.
4. Place food in the oven.
Check food for doneness before the stop time is reached. If food will not be done when stop
time is reached, add more cooking time before time elapses. See "Cook Time" section. At
the end of the stop time, the oven will automatically turn off.
5. Press OFF when finished.
Refer to "EasyConvect TM Conversion" section for more information.
Proof,').
NOTE: Rapid Proof operates at a siight!y higher tempeiature foi second r seof formed
dough:
2. Press START.
Let the dough rise until nearly doUbied in size Proofing time may Vary depending Ondough
type and quantity.
3' Press OF,F When finished,,,Pr00fing,
Refer to the Proofing Bread section for moie informationl
KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads. The
default temperature is 170°F (78°C).
3. Press START.
4. Press OFF when finished.
DELAY START Delayed start The DELAY START keypad is used to enter the starting time foran oven function with a delayed
COOK TIME Cook time
start.
Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of
time, and/or shut off automatically. Delay start should not be used for foods such as breads and
cakes because they may not bake properly.
To set a Cook Time or a Delayed Cook Time, see "Cook Time" section.
KEYPAD FEATU RE
INSTRUCTIONS
WARMING Warming drawer
DRAWER (on some
ON/OFF models)
WARMING Slow cook
DRAWER drawer (on
SLOW COOK/OFF some models)
CLEAN clean cycle
CONTROL LOCK Oven control No keypads will function with the controls locked.
hold 3 sec. to lock lockout 1. Check that the oven and the Timer are off.
OPTIONS oven use Enables Youto personalize the audibie t0nes and oven operation to suit your need& seethe
functions !!Oven Use,! section,
1. Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.
2. To select a higher temperature setting, press WARMING DRAWER ON a second time for the
Medium setting and a third time for the High setting,
3. Press START to begin preheating the warming drawer.
Allow the warming drawer to preheat for 15 minutes.
Place the cooked food(s) in the warming drawer
Press WARMING DRAWER OFF to turn offthe heating element.
Refer to the "Warming Drawer" section for information.
1. Press WARMING DRAWER SLOW COOK to select the Slow Cook function at the Low
setting.
2. To select a higher temperature setting, press WARMING DRAWER SLOW COOK a second
time for the High setting.
3. Place the food(s) in the warming drawer.
4. Press START to begin heating the warming drawer.
5. Press WARMING DRAWER OFF to turn off the heating element.
Refer to the "Warming Drawer" section for information.
2. Press and hold the "0" keypad for 3 seconds.
3. If enabled, a tone will sound, and "CONTROL LOCKED" will be displayed.
4. Repeat to unlock.
COOKTOP USE
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or without
cookware on the grate.
The flame should be adjusted so it does not extend beyond the
edge of the pan.
To Set:
1. Push in and turn knob counterclockwise to LITE.
All surface burners will click. Only the burner with the control
knob turned to LITE will produce a flame.
2.
Turn knob to anywhere between HIGH and LOW.
REMEMBER: When range is in use, the entire cooktop area
may become hot.
I
Ultra Power TM Burner Feature
The left front burner is designed to give maximum power when fully
on. It can be used to rapidly bring liquid to a boil and to cook large
quantities of food.
Even-Heat TM Simmer Burner Feature
The Even-Heat TM Simmer Burner feature allows for more precise
simmering and low temperature cooking. It is the right rear burner.
Power Failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to LITE. After burner lights, turn knob to desired
setting.
I
Thegratesonthisrangecoverthefullwidthofthecooktop.The
twogratesmayinterlock(onsomemodels),usingthehookformed
intooneendofbothgrates.Theflatendofonegratedropsonto
thehookontheothergrateasshowninthefollowingillustration.
Onsomemodels,thetwogratesareidenticalandcanbeusedon
eithertheleftorrightsideofthecooktop.Gratesthataredesigned
foruseononlyonesideofthecooktopwillhaveeither"LEFT"or
"RIGHT"embossedonthebottomsideofthegrate.
2. Before each use, brush on a thin layer of cooking oil to keep
food from sticking. Cooking sprays may leave a sticky residue
on the griddle that is hard to remove.
3. Preheat the griddle for 5 minutes. Preheating the griddle slowly
will ensure even heat distribution and will avoid warping the
griddle.
4. For preheating and cooking, set the front burner to the lowest
heat setting and the rear burner to medium-high heat for best
performance.
NOTE: The griddle may also be used on the left side grate. For
best results, the rear burner setting should be set to Medium-
Low or Medium, and the front burner setting should be set to
Low.
Griddle installed on right side of cooktop
To Use the Griddle:
1. Locate the griddle on the right side grate as shown. The
locating feet on the bottom of the griddle will engage the grate
tines to keep the griddle from sliding.
A. Burner cap C.Alignment pins
B. Burner base D. Igniter
E. Gas tube opening
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the "General
Cleaning" section.
To Clean the Griddle:
1. Let the griddle cool, then empty the drip tray.
2. See the "General Cleaning" section for cleaning instructions.
3. Store griddle in a cool dry place.
Gas tube opening: Gas must flow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents or any other material
to enter the gas tube opening. Keep spillovers out of the gas tube
by always using a burner cap.
B
A. 1-1W' (25-38 mm)
B. Burner ports
Burner ports: Check burner flames occasionally for proper size
and shape as shown in the previous illustration. A good flame is
blue in color, not yellow. Keep this area free of soil and do not allow
spills, food, cleaning agents or any other material to enter the
burner ports.
To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
1. Remove the burner cap from the burner base and clean
according to "General Cleaning" section.
2. 4. Replacetheburnercap,makingsurethealignmentpinsare
Cleanthegastubeopeningwithadampcloth.
3. properlyalignedwiththeburnercap.
Cleancloggedburnerportswithastraightpinasshown.Do
notenlargeordistorttheport.Donotuseawoodentoothpick.
Iftheburnerneedstobeadjusted,contactatrainedrepair
specialist.
A. Incorrect
B. Correct
5=
Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
Select a burner that best fits your cookware. See the following
illustration and chart.
© ©
Back of Range
(on some
models)
,, Front of Range , j
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a well-
fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop or grates. Aluminum and
copper may be used as a core or base in cookware.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results.
Cookware with nonstick surfaces should not be used under the
broiler.
Check for flatness by placing the straight edge of a ruler across the
bottom of the cookware. While you rotate the ruler, no space or
light should be visible between it and the cookware.
Burner Size Recommended Use
Small • Low-heat cooking
• Melting chocolate or butter
Medium • Multipurpose burner
Large • For large cookware
Extra-Large • Most powerful burner
• For large cookware
Use the following chart as a guide for cookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum
Cast iron
Ceramic or
Ceramic glass
• Heats quickly and evenly.
• Suitable for all types of cooking.
• Medium or heavy thickness is best for
most cooking tasks.
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Follow manufacturer's instructions.
• Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
Copper
Earthenware/
Stoneware
• Heats very quickly and evenly.
• May leave copper residues, which
may be diminished if cleaned
immediately after cooking
• Follow manufacturer's instructions.
• Use on low heat settings.
COOKWARE CHARACTERISTICS
Porcelain
enamel-on-
steel or cast
iron
• See stainless steel or cast iron.
For best results, the cookware should be centered above the
burner with the bottom sitting level on the grate. The flame should
be adjusted so that it does not extend up the sides of the pan.
Stainless steel •
When canning for long periods, alternate the use of surface
burners between batches. This allows time for the most recently
used areas to cool.
• Center the canner on the grate above the burner.
Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
OVEN USE
The normal operation of the range will include several noises that
may be heard each time the Bake or Broil burners ignite during the
cooking cycle:
• gas valves may make a "popping" sound when opening or
closing
• igniters will "click" several times until a flame is sensed
• a "poof" sound is heard when a Bake or Broil burner ignites
d < <if{?: ts
Do not place canner on 2 surface burners at the same time.
For more information, contact your local agricultural extension
office, or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
Control Display
The display will flash when powered up or after a power loss. Press
OFF to clear. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One tone
• Valid pad press
• Oven is preheated (long tone)
• Function has been entered
• Reminder (on some models), repeating each minute after the
end-of-cycle tones
Three tones
• Invalid pad press
Four tones
• End of cycle
Use the Options key to change the tone settings.
Options
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Options key.
Use the Options key to scroll through the features that can be
changed. Each press of the Options key will advance the display to
the next setting. After selecting the feature to be changed, the
control will prompt you for the required input. After the setting is
saved by pressing Start, the control will exit Options and display
the time of day. Details of all of the feature changes are explained in
the following sections.
Press OFF to exit Options.
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To change:
1. Press OPTIONS until "TEMP UNIT" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones. Reminder tones are still active when all tones are disabled.
1. Press OPTIONS until "SOUNDS" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press OPTIONS until "SOUND VOLUME" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press OPTIONS until "END TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press OPTIONS until "KEYPRESS TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press OPTIONS until "REMINDER TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
12/24 Hour Clock
1. Press OPTIONS until "12/24 HOUR" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features to be
demonstrated without heating elements or burners turning on. If
this feature is activated, the oven will not work.
1. Press OPTIONS until "DEMO MODE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1. Press OPTIONS until "12-HR AUTO-OFF" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
Languages - Scrolling Display Text
Language options are English, Spanish and French.
1. Press OPTIONS until "LANGUAGE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door may cause element or
burner cycling to give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press OPTIONS until "TEMP CALIB" is displayed.
2. The current setting will be displayed. Press the "1" keypad to
toggle between the oven and the warming drawer.
3. Press START to select the choice displayed in Step 2. Wait
10 seconds for the display to change then continue with Step 4.
4. Press the "1" keypad to increase the temperature in 5°F (3°C)
increments, or press the "6" keypad to decrease the
temperature in5°F (3°C) increments. The range is from -30°F to
+30°F (-18°C to +18°C).
5. Press START to save the setting.
6. Press OFF to exit and display the time of day.
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate. All
other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not turn
on or off and the heating elements will not turn on or off immediately.
To Enable Sabbath Mode Capability (one time only):
1. Open oven door.
2. Press 7-8-9-6. Three tones will sound.
"SABBATH ON" or "SABBATH OFF" will appear in the display.
If "SABBATH OFF" is displayed, Sabbath Mode is enabled.
Continue with Step 4. If "SABBATH ON" is displayed, continue
with Step 3.
3.
Press START to change the displayed status.
4.
Close oven door and press OFR Sabbath Mode can be
activated for baking.
NOTE: To disable the Sabbath Mode, repeat steps 1 - 4 to
change the status from "SABBATH OFF" to "SABBATH ON."
10
To Activate Sabbath Mode:
1. Press BAKE.
2. Press the number keypad to set a temperature other than
350°F (177°C).
3. Press START.
For timed cooking in Sabbath Mode, press COOK TIME, then
the number keypad to set the desired cook time.
4. Press OPTIONS. Three tones will sound. Then press "7." "SAb"
will appear in the display.
To Adjust Temperature (when Sabbath Mode is running):
1. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display. The scrolling text will be shown on the display as it was
before the keypad was pressed.
2. Press START.
To Deactivate Sabbath Mode:
Press OPTIONS, then press "7" to return to regular baking or press
OFF to turn off the range.
IMPORTANT:Toavoidpermanentdamagetotheovenbottom Forbestcookingresults,donotcoverentireovenrackwithfoil
finish,donotlinetheovenbottomwithanytypeoffoilorliner, becauseairmustbeabletomovefreely.
.......... _1t_W__ _
IMPORTANT:Toavoidpermanentdamagetotheporcelainfinish,
donotplacefoodorbakewaredirectlyontheovendoororbottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Make sure
that no bakeware piece is directly over another.
Racks
• Position racks before turning on the oven.
• Do not move racks with bakeware on them.
• Make sure racks are level.
To move a rack, pull it out to the stop position, raise the front edge,
and then lift out. Use the following illustration and charts as a
guide.
The oven has 7 positions for a flat rack, as shown in the previous
illustration and the following table.
Flat Rack Position* Type of Food
7 Broiling/searing meats, hamburgers,
6
3 or4
2
steaks
Broiled meats, poultry, fish
Most baked goods, casseroles
Roasted meats
Large roasts or poultry
/
A. Ends of rack in position 3
B. Food in position 2
IMPORTANT: These rack positions are for flat racks. If a Max
Capacity Rack is used, the rack position must be adjusted as
shown in the previous figure.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 5 for regular or convection baking.
3-rack (True convection only): Use rack positions 2, 4 and 6.
NOTE: The roll-out rack, which is available on some models, sits
midway between adjacent rack positions. When used for 3-rack
baking, it is recommended that it be placed in rack position 2. The
roll-out rack will fit in all rack positions except rack position 7.
Best Performance on 2 Racks
For best results when baking cakes on 2 racks, use racks 2 and 5
with the Bake function. Place the cakes on the racks as shown. For
best results baking 2 racks of cookies, use racks 2 and 5 with the
Bake function.
B
*If your model has a Max Capacity Rack, the recessed ends must
be placed in the rack position above the desired position of the
food. See the following illustration.
_], II. ....... ') ...... I
Split-Rack with Removable Insert
The split-rack with removable insert is a space maximizer. When
the two are attached, they make a full rack. The insert can also be
removed to provide room for large items such as a turkey and
casseroles. Do not place more than 25 Ibs (11.3 kg) on the split-
rack.
The insert can also be used on the counter as a cooling rack.
A
A. Sprit-rack
B. Removable insert
Ifyou would like to purchase a split-oven rack, one may be
ordered. See "Accessories" section to order.
B
11 =C
To Use Racks:
1. Place a full rack in the lower section of the oven and position
the split-rack above it.
2. Place large items on the right side of the full rack.
3. Place deeper, covered dishes on the left side of the full rack.
4. Place shallow dishes on the split-rack.
5. When finished cooking, slowly remove items.
A
i!i
I!i
II
B
A.Place shallow dishes on the sprit-rack.
B.Large item placed on the fight sideof full-rack
11
The roll-out rack allows easy access to position and remove food in
the oven. The roll-out rack will fit in all positions except the top rack
position 7.
Open Position
A. Rack frame
B. Sfiding rack
NOTE: To fully extend the roll-out rack, pull the sliding rack
forward, and continue pulling until the rack frame slides forward.
"_ =®
i
/
I
I
ii
A
- I _i_,,_
To Insert Roll-Out Rack
1. Angle the front of the rack assembly up and insert the rack
frame into the "V" cutout in the rack guides of the oven cavity.
II I "_,' I '' I'\
A B
A. "V" cutout
B. Rack guides
2.
Keep rack assembly lifted up at an angle and push in to bypass
the lower "V" cutout.
3.
Lower the front of the rack assembly and gently slide rack
assembly into oven, bypassing the "V" cutouts. Push the rack
assembly to the back of the oven until it stops.
A
Closed and Engaged Position
A. Sfiding rack
B. Rack frame
A. Rack frame
B. Sfiding rack
................A
A. "V" cutout
B. Rack guides
To Remove Roll-out Rack
1. Push the sliding rack in completely so that it is in the closed
and engaged position.
2. Using 2 hands, gently pull the sliding rack and the rack frame at
the same time to the "V" cutout. Angle the rack so that the front
is higher than the back, and gently pull rack past "V" cutout
and then out of the oven.
To avoid damage to the sliding rack, do not place more than 25 Ibs
(11.4 kg) on the rack.
Do not clean the roll-out rack in a dishwasher. It may remove the
rack's lubricant and affect its ability to slide.
See the "General Cleaning" section for more information.
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the oven
vent will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper or other items that could melt or
burn near the oven vent.
12
A. Oven vent
Temperature Management System
The oven control system electronically regulates the oven heat
levels during preheat and bake to maintain a temperature range for
optimal cooking results. The bake burner cycles on and off in
intervals. On convection range models, the fan may run while
preheating and may be cycled on and off for short intervals during
baking to provide the best results. This feature is automatically
activated when the oven is in use.
The convection fan will not be on during the first 5 minutes of the
cycle.
Before baking and roasting, position racks according to
"Positioning Racks and Bakeware" section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Preheating
When START is pressed, "LO" will be displayed and the oven will
begin preheating. Once 100°F (38°C) is reached, the display
temperature will increase as the actual temperature of the oven
increases. When the preheat temperature is reached, a tone will
sound, and the selected temperature will appear on the display.
The time necessary to preheat the oven to 350°F (177°C) will be
approximately 15 minutes, depending on the model. Factors that
have an impact on preheat times are: room temperature, starting
oven temperature, quality of the gas supply, and the number of
oven racks. Unused oven racks can be removed prior to preheating
your oven to reduce preheat time.
When broiling, preheat the oven for 5 minutes before putting food
in unless recommended otherwise in the recipe. Position food on
grid in a broiler pan, then place it in the center of the oven rack.
IMPORTANT: Close the door to ensure proper broiling temperature.
Changing the temperature when Custom Broiling allows more
precise control when cooking. The lower the broil setting, the
slower the cooking. Thicker cuts and unevenly shaped pieces of
meat, fish and poultry may cook better at lower broil settings. Use
racks 6 or 7 for broiling. Use rack position 6 if using the roll-out
rack. Refer to the "Positioning Racks and Bakeware" section for
more information.
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air helps maintain a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
During convection cooking, the bake and broil burners, convection
(true convection only) element and fan cycle on and off in intervals to
maintain the oven temperature, while the fan circulates the hot air.
NOTE: The convection fan will turn on approximately 5 minutes
into any convection cycle.
If the oven door is opened during convection cooking, the fan will
turn off immediately. It will come back on when the oven door is
closed.
NOTE: The oven door must be closed for convection broiling.
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
Ifyou would like to purchase a broiler pan, one may be ordered.
Please refer to the "Accessories" section for more information.
NOTE: Odors and smoke are normal the first few times the oven is
used or if the oven is heavily soiled.
SETTING GUIDELINES
CONVECT
ROAST
CONVECT
BROIL
Bow Tie True Convection with T.H.E. TM Element
Use standard recipe temperature. Cooking time
may be reduced by 15-30% with Convect Roast
so the food should be checked for doneness early.
Use standard recipe temperature. Cooking time
may be reduced so the food should be checked
for doneness early.
Position the racks according to the "Positioning Racks and
Bakeware" section before starting convection cooking.
With convection cooking, most foods can be cooked at a lower
temperature or at a shorter time. These adjustments can be made
using the following chart or by using the EasyConvect TM
Conversion feature on your range.
SE'I-I'ING GUIDELINES
CONVECT
BAKE
Reduce the standard baking temperature
25°F (15°C)
True convection adds an electric element around the convection
fan to enhance the cooking performance. This feature enables
three-rack baking in your range. Use the following Convect Options
chart as a guide.
Convect Options
SETTING FOODS
CONVECT Single or multiple-rack baking for cookies,
BAKE biscuits, breads, casseroles, tarts, or tortes.
CONVECT Thicker cuts or unevenly shaped pieces of meat,
BROIL fish or poultry.
CONVECT Whole chicken or turkey, vegetables, pork roasts,
ROAST or beef roasts.
13
_::_c __{'_ _S_7_*_ _¸'_
Convection cooking temperatures and times can differ from those
of standard cooking. Depending upon the selected category,
EasyConvect TM conversion automatically reduces the standard
recipe temperature and/or time you input for convection cooking.
Foods are grouped into 4 general categories. Choose the category
most appropriate for the food to be cooked. Use the following chart
as a guide.
SETTING FOODS
MEATS Chicken: whole and pieces
Meat loaf, Roasts: pork, beef and ham
(Turkey and large poultry are not included because
their cook time varies.)
BAKED Biscuits, Breads: quick and yeast
GOODS Cakes and Cookies
Casseroles
PIZZA Fresh pizza, Frozen pizza
OTHER Frozen convenience foods: french fries,
nuggets, fish sticks, lasagna
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
To Set a Timed Cook:
1. Press BAKE, CONVECT BAKE, or CONVECT ROAST.
2. Press the number keypads to enter a temperature other than
the one displayed.
3. Press COOK TIME. The cook time oven indicator light will light
up.
4. Press the number keypads to enter the length of time to cook.
5. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically.
The temperature and/or time setting can be changed at any
time by repeating steps 2 - 3.
6. Press OFF to clear the display.
NOTE: The time setting for any timed cooking function,
including EasyConvect TM Conversion, can be adjusted by
following the previous steps 3 - 5.
To Use:
NOTE: For best results, preheat your oven to the desired
temperature prior to using Easy Convect TM Conversion. After
preheating is complete, press the OFF key before using
EasyOonvect TM Conversion.
1. Press the EASY CONVECT pad for the desired option (MEATS,
BAKED GOODS, PIZZA or OTHER).
2. Press number pads to enter standard cook temperature then
press START.
3. Press number pads to enter standard cook time then press
START.
4. Place the food in the oven.
Check food for doneness before the stop time is reached. If
food will not be done when the stop time is reached, add more
cooking time before time elapses (see "Cook Time" section). At
the end of the stop time, the oven will automatically turn off.
5. Press OFF when finished.
6. Remove food from the oven.
To Set a Delayed Timed Cook:
1. Press BAKE, CONVECT BAKE, or CONVECT ROAST.
2. Press the number keypads to enter a temperature other than
the one displayed.
3. Press COOK TIME. The cook time oven indicator light will light
up.
4. Press number keypads to enter the length of time to cook.
5. Press DELAY START.The start time/delay oven indicator light
will light up.
6. Press number keypads to enter the number of hours and/or
minutes you want to delay the start time.
7. Press START.
When the start time is reached, the oven will automatically turn on.
The temperature and/or time settings can be changed any time
after pressing Start by repeating steps 2 - 7. When resetting the
time and temperature, it is necessary to press Start between
steps 4 and 5 to continue making changes.
When the set cook time ends, the oven will shut off automatically.
8. Press OFF to clear the display.
Proofing bread prepares the dough for baking by activating the
yeast. Follow the recipe directions as a guide. Standard Proof
should be used for fresh dough, thawed dough, and for the first
and second rise. Rapid Proof (on some models) operates at a
slightly higher temperature than Standard Proof, and it can be used
for the second rise of formed dough.
To Proof:
Before first proofing, place the dough in a lightly greased bowl and
cover loosely with wax paper, coated with shortening. Place on
rack guide 2 and close the oven door.
NOTE: If the temperature of the oven is greater than 100°F (38°C),
"oven cooling" will be displayed until the temperature is less than
100°F (38°C).
14
1. Press BREAD PROOF until the desired proof is displayed
("Standard Proof" or "Rapid Proof"). Rapid Bread Proofing is
available only on some models.
2. Press START.
Let the dough rise until nearly doubled in size. Proofing time
may vary depending on dough type and quantity.
3. Press OFF when finished proofing.
Before second proofing, shape the dough, place it in baking pan(s)
and cover loosely. Follow the same placement and control steps
above. Before baking, remove the cover.
NOTE: If the oven temperature is greater than 100°F (38°C), the
display will indicate "oven cooling" until the temperature is below
100°F (38°C).
Before using the warming drawer, wash the bottom of the drawer
with soap and water. See "General Cleaning" section.
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
The Warming Drawer is ideal for keeping hot cooked foods at
serving temperature. It may also be used for warming breads and
pastries.
Different types of food may be placed in the warming drawer at the
same time. For best results, do not hold foods longer than 1 hour.
For smaller quantities, pizza, or heat-sensitive foods, such as eggs,
do not hold longer than 30 minutes.
Food must be at serving temperature before being placed in the
warming drawer. Breads, pastries, and fruit pies may be heated
from room temperature.
Remove food from plastic bags and place in oven-safe container.
Cover foods with a lid or aluminum foil.
Do not cover with plastic wrap.
Empty serving dishes and ovenproof dishes can be heated while
the warming drawer is preheating. Check the dish manufacturer's
recommendations before warming the cookware.
Sow ........
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
The Slow Cook function in the warming drawer cooks food slowly
at a low temperature over a long period of time, similar to a
countertop slow cooker.
There are 2 settings: Hi and Lo. Guidelines for cooking times are
4 to 5 hours for Hi and 8 to 10 hours for Lo. Smaller quantities of
food may require less time, while larger quantities may require more
time.
When slow cooking, use oven-safe cookware. Before slow
cooking, thaw frozen foods completely. Cover foods with a lid or
aluminum foil to keep the food moist.
IMPORTANT: Brown roasts thoroughly before starting to slow
cook.
Before using the warming drawer, wash the bottom of the drawer
with soap and water. See "General Cleaning" section.
To Use:
1. Press WARMING DRAWER ON to select the Warming Drawer
function at the Low setting.
f WARMING DRAWER
i=Med-Low
2. To select a higher temperature setting, press WARMING
DRAWER ON a second time for the Medium setting or a third
time for the High setting.
3. Press START to begin preheating the warming drawer.
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer.
6. Press WARMING DRAWER OFF to turn off the heating element.
WARMING DRAWER
The Warming Drawer operates at temperatures of approximately
140°F(60°C)(Low),160°F(71°C)(Medium),180°F (82°C)(High).
To Use:
1. Press WARMING DRAWER SLOW COOK to select the Slow
Cook function at the Low setting.
WARMING DRAWER
I SIowCook I
Hi-Low
2. To select a higher temperature setting, press WARMING
DRAWER SLOW COOK a second time for the High setting.
3. Place the food(s) in the warming drawer.
4. Press START to begin heating the warming drawer.
5. Press WARMING DRAWER OFF to turn off the heating element.
WARMING DRAWER
15
Loading...