® 30" Freestanding Electric Range
PRODUCT MODEL NUMBERS
KERC500G KERC507H
KERC500H KERC508L
KERC505G KERI500G
KERC506H KERS505G
KERC507G KERS507G
Electrical: Use 8 gauge copper wire or 6 gauge aluminum wire. A four-wire or three-wire, singlephase, 120/240-volt, 60-Hz, AC-only, electrical supply is required on a 40 amp circuit, (or, if specified on the model/serial rating plate, a fourwire or three-wire, single-phase 120/208-volt, 60 Hz, AC-only electrical supply is available, a 40 amp circuit), fused on both sides of the line. A
time-delay fuse or circuit breaker is recommended. The model/serial rating plate is located on the oven frame behind the door.
CABINET OPENING DIMENSIONS
OVERALL DIMENSIONS
|
46-13/16" |
|
overall |
|
height |
26-3/8" |
|
depth with |
36" |
handle |
cooktop |
|
height |
30" width
24-1/2"
Cabinet opening dimensions: |
|
|
|
|
|
|
|
|
|
|
|
|
25" countertop depth |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13" max. |
|
|
|
|
|
For minimum |
||
24" base cabinet depth |
|
|
|
|
|
|
|
|
clearance to |
|||
|
|
|
|
|
||||||||
|
|
|
upper cabinet depth |
|
|
|
|
|
||||
36" countertop height |
|
|
|
|
|
|
|
the top of the |
||||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
cooktop, see |
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE.** |
|
|
|
|
|
30" min. cabinet opening |
|||||||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
width |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
||
|
18" upper |
|
|
|
|
|
||||||
|
cabinet to |
|
|
|
|
|
||||||
|
countertop |
|
|
|
|
|
||||||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
||||||||
|
|
30-3/8" |
|
|
|
|||||||
|
|
|
|
|
|
opening |
width |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
4" min. clearance from both sides of range to side wall or other combustible material.
**Note: 24" min. when bottom of wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
30" min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
wall receptacle or junction box –
8" to 22" from either cabinet,
7" max. from floor.
7/8" min. required between cutout and cabinet door or hinge.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. 9757851 |
Instructions packed with product. Specifications subject to change without notice. |
09-03-03 |