KitchenAid KERC507HBL3, KERC507HAL3, KERC507HAL0, KERC507HAL1, KERC507HBS1 Owner’s Manual

...

and Care Guide

TO THE INSTALLER: PLEASE LEAVE THIS INSTRUCTION'BOOK WITH THE UNIT.

TO THE CONSUMER: PLEASE READ AND KEEP THIS BOOK FOR FUTURE

REFERENCE.

KitchenAid °

For4 THE WAY IT'S MADE?

A Note to You ............................................ 2

Range Safety .............................................. 3

Parts and Features .................................... 6

Using and Caring for Your Cooktop ........ 9

Using the surface units ............................ g

Cookware tips ........................................ 11

Characteristics of cookware materials ... 12

Home canning information ..................... 13

Caring for your cooktop ......................... 13

Using and replacing the cooktop light ... 15

Using and Caring for Your Oven ........... 16

Using the electronic oven control .......... 16

Setting the clock .................................... 22

Using the timer ....................................... 22

Oven settings ......................................... 24

Cooking tips ........................................... 25

Bake or Convection Bake ...................... 27

Broil........................................................ 29

Convection Broil ..................................... 31

Convection Roast .................................. 32

Adjusting oven temperature ................... 33

Using the temperature probe ................. 35

Using Convect Full Meal ........................ 37

Using EASY CONVECT TM Conversion ..40

Timed cooking ....................................... 42

Dehydrating ............................................ 45

Raising (proofing) bread ........................ 47

Cleaning your oven and controls ........... 49

Oven lights............................................. 51

Resetting circuit breakers ...................... 51

' Uslngthe Self-Cleaning Cycle ............... 52

Before you start ..................................... 52

Before setting the controls ..................... 53

For best cleaning results ....................... 55

How the cycle works .............................. 55

Troubleshooting ...................................... 56

Requesting Assistance or Service ........ 59

Warranty ................................................... 64

In the U.S.A. for assistance or service, call

the Consumer Assistance center:

1-800-422-1230

In Canada for assistance or service,

see page 60.

Models:

9753843

KITCHENAID®Electric Ranges

KERC507

YKERC507

www.kitchenaid.com

Note to You

T_an_._ou for buying a KITCHENAID e appliance!

KitchenAid designs the best tools for the most important room in your house. To ensure that you enjoy many years of trouble-free operation, we developed this Use and Care Guide. It contains valuable information concerning how to operate and maintain your new appliance properly and safely. Please read it carefully. Also, please complete and mail the enclosed, Product Registration Card.

Please record your model's information.

Whenever you call our Consumer Model Number Assistance Center at 1-800-422-1230 (in Serial Number

Canada, 1-800-461-5681 ) or request service

for your appliance, you need to know your complete model number and serial number.

You can find this information on the model and serial number plate (see diagram for

location of plate).

Please also record the purchase

information.

Purchase/ Installation Date

Builder/Dealer Name

Address Phone

NOTE: You must provide proof of purchase

or installation date for in-warranty service.

Keep this book and the sales slip together in a safe place for future reference.

. nge Safety

Your safety and the safety of others isvery important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.

All safety messages will be preceded by the safety alert symbol and the word "DANGER" or '_VARNING." These words mean:

You will be killed or seriously injured if you don't follow instructions.

You can be killed or seriously injured

if you don't follow instructions.

All safety messages will identify the hazard, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not followed.

The anti-tip bracket

The range will not tip during normal use. However, tipping can occur if you apply too much force or weight to the open door without the anti-tip bracket properly secured.

Tip Over Hazard

A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved.

See the installation instructions for details. Failure to follow these instructions can result in death or

serious burns to children and adults.

Anti-Tip Bracket

Range Foot

Making sure the anti-tip bracket is installed:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor.

• Slide range back so rear range foot is under anti-tip bracket.

nge Safety

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of

fire, electrical shock, injury to persons, or damage when using the range,

follow basic precautions, including the following:

• WARNING: TOREDUCETHE

RISK OF TIPPING OF THE RANGE,

THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI- TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROP-

ERLY, SLIDE RANGE FORWARD,

LOOK FOR ANTI-TIP BRACKET SECURELY ATrACHED TO

FLOOR, AND SLIDE RANGE BACK

SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.

• CAUTION: Do not store items of

interest to children in cabinets above a range or on the backguard of a

range - children climbing on the range to reach items could be seriously injured.

• Proper Installation - Be sure the

range is properly installed and grounded by a qualified technician.

• Never Use the Range for Warming or

Heating the Room.

• Do Not Leave Children Alone -

Children should not be left alone or unattended in area where the range

is in use. They should never be allowed to sit or stand on any part of the range.

• Wear Proper Apparel - Loose-fitting

or hanging garments should never be worn while using the range.

• User Servicing - Do not repair or

replace any part of the range unless

specifically recommended in the

manual. Allother servicing should be referred to a qualified technician.

• Storage in or on the Range - Flammable materials should not be

stored in an oven or near surface units.

eDo Not Use Water on Grease Fires -

Smother fire or flame or use dry chemical or foam-type extinguisher.

• Use Only Dry Potholders - Moist or

damp potholders on hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel or other bulky cloth.

• DO NOT TOUCH SURFACE UNITS OR

AREAS NEAR UNITS -Surface units may be hot even though they are dark in

color. Areas near surface units may become hot enough to cause burns.

During and after use, do not touch, or let clothing or other flammable materials

contact surface units or areas near units until they have had sufficient time to cool.

Among those areas are the cooktop and surfaces facing the cooktop.

• Use Proper Pan Size - The range is

equipped with one or more surface units of different size. Select utensils having

flat bottoms large enough to cover the

surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing.

Proper relationship of utensil to burner

will also improve efficiency.

• Never Leave Surface Units Unattended at High Heat Settings -

Boilover causes smoking and

greasy spillovers that may ignite.

• Protective Liners - Do not use aluminum

foil to line oven bottoms, except as suggested in the manual. Improper

installation of these liners may result in a risk of electric shock, or fire.

SAVE THESE INSTRUCTIONS

- nge Safety

IMPORTANT SAFETY INSTRUCTIONS

r.4

• Glazed Cooking Utensils - Only certain types of glass, glass/ceramic,

ceramic, earthenware, or other glazed utensils are suitable for

range-top service without breaking due to the sudden change in temperature.

• Utensil Handles Should Be Turned Inward and Not Extend Over

Adjacent Surface Units - To reduce the risk of burns, ignition of

flammable materials, and spillage due to unintentional contact with the

utensil, the handle of a utensil should be positioned so that it is turned

inward, and does not extend over adjacent surface units.

• Do Not Cook on Broken Cooktop - If cooktop should break, cleaning

solutions and spillovers may penetrate the broken cook-top and

create a risk of electric shock. Contact a qualified technician

immediately.

• Clean Cooktop With Caution - If a wet sponge or cloth is used to wipe spills on a hot cooking area, be

careful to avoid steam burn. Some cleaners can produce noxious fumes

if applied to a hot surface.

• Use Care When Opening Door - Let hot air or steam escape before removing or replacing food.

• Do Not Heat Unopened Food Containers - Build-up of pressure may cause container to burst and result in injury.

• Keep Oven Vent Ducts Unobstructed.

• Placement of Oven Racks - Always place oven racks in desired location

while oven is cool. If rack must be moved while oven is hot, do not let potholder

contact hot heating element in oven.

• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN -

Heating elements may be hot even though they are dark in color. Interior

surfaces of an oven become hot enough to cause burns. During and after use, do

not touch, or let clothing or other flam- mable materials contact heating ele-

ments or interior surfaces of oven until they have had sufficient time to cool.

Other surfaces of the appliance may become hot enough to cause burns -

among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of

oven doors.

For self-cleaning ranges -

• Do Not Clean Door Gasket - The door gasket is essential for a good seal. Care

should be taken not to rub, damage, or move the gasket.

• Do Not Use Oven Cleaners - No commercial oven cleaner or oven liner

protective coating of any kind should be used in or around any part of the oven.

• Clean Only Parts Listed in Manual.

• Before Self-Cleaning the Oven -

Remove broiler pan and other utensils.

For units with ventilating hood -

• Clean Ventilating Hoods Frequently - Grease should not be allowed to

accumulate on hood orfilter.

• When flaming foods under the hood, turn the fan on.

SAVE THESE INSTRUCTIONS

Ports and Features

Feature locations

Cooktop li!

Warm zone t -

storage

(containing pan and grid)

Model and number plate

tOn Some Models

Control panel

unit

(coil or ceramic

glass top)

Automatic oven

light switch

Broil element

(not shown)

- Bake element (not visible)

Oven racks

Control panel

Warm zone Left rear switch t control knob

Left front control knob

Display

Electronic

oven control

Right rear Simmer control knob switch t

Right front control knob

i ,,if

The oven vent

Oven vent

Parts and Features

The oven door vent

Hot air and moisture escape from the oven through a vent on the lower left side of the backguard. Do not block the vent by using large pans or covers. Poor baking/roasting

can result.

The oven door

Removing the oven door:

1. Open the door to the Broil Stop position

(open about 4" [10 cm]).

2. Liftdoor slightlyand pull out and back until hinges come out to the catch position.

3. Push door down and pullstraight out to

remove door completely.

Hot air and moisture escape from the door vent during certain oven modes. Some

condensation may be observed occasionally.

This will not affect cooking performances.

Replacing the oven door:

1. Holdingthe doorby the handle, place the

top of the door under the cooktop overhang

and use your leg to apply pressureto slide

hingesintothe slotsas far as possible.

2. Open doorto the broilpositionor slightly

past it.

3. Using the side of your leg, apply pressure to the bottom of the door front. Lift the

door slightly while applying pressure to push, untilthe hinges have gone in fully.

Parts and Features

The storage drawer

You can remove the storage drawer to make it easier to clean under the range. Use care

when handling the drawer.

Removing the storage drawer:

1. Empty drawer of any pots and pans before removing drawer. Use recessed area on top edge of drawer to pull drawer straight out to the first stop. Lift front and pull out to the second stop.

2. Lift back slightly and slide drawer all the way out.

Replacing the storage drawer:

Drawer slide rail

1. Fit ends of drawer slide rails into the drawer guides on both sides of opening.

2. Lift drawer front and press in until metal stops on drawer slide rails clear white

stops on drawer guides. Lift drawer front again to clear second stop and slide

drawer closed.

(Using and Caring for Your

Cooktop

Usingthe surfaceunits

Fire Hazard

Turn off all controls when done cooking.

Control knobs

Push in control knobs before turning them

to a setting. Set them anywhere between HI and OFF.

Power On lights Each control knob has a Power On Light.

Failure to do so can result in death

or fire.

Control setting guide

For best results, start cooking at the high setting; then turn the control knob down to continue cooking.

turn on a surface unit, the Power When you use a control knob to

On Light by that knob will glow.

Hot surface indicator lights

The Hot Surface Indicator Lights on the

cooktop surface will glow when the surface units get

hot. The Indicator Lights will

continue to glow as long as

the surface units are too hot

("CHAUD" is

French for

"HOT")

to touch, even after they are turned off.

SETTING RECOMMENDED USE

HI or • To start food cooking.

MAX • To bring liquid to a boil.

MED-HI • To hold a rapid boil. or 6-8 • To quickly brown or sear

meat.

MED • To maintain a slow boil.

or 5 • To fry poultry or meat.

• To make pudding, sauce,

or gravy.

MED-LO • To stew or steam food. or 2-4 • To simmer food.

LO or 1

• To keep food warm. Set the heat higher or lower within

the LO (or 1) band to keep food at the temperature you want.

• To maintain liquid just below

simmer.

• To melt chocolate or butter.

Using and Caring for Your Cooktop

Simmer Feature (some models)

The Simmer feature is an adjustable setting

simmering of foods. The switch,

which allows for more precise when in the "OFF" position,

operates at normal wattage

(1800 W). When in the "ON" position, it operates the right front element at a lower wattage (450 W).

NOTE: All other elements can be used for

normal operation whether the Simmer

feature is in use or not.

Warm Zone Feature (some models)

Use the Warm Zone element to keep cooked

w,,.,,,,,,.,,, foods warm. It is not recom-

: _" mended for heating cold foods.

The Warm Zone is located in the center of your cooktop. Set

switch to "ON" for use.

• Cover all foods with a lid or aluminum foil. Do not use plastic wrap to cover food because it may melt onto the cooktop

surface. When warming baked goods, allow a small opening in the cover for

moisture to escape.

• Use only cookware and dishes recom- mended for oven and cooktop use.

• Use potholders or oven mitts to remove food.

Dual-size cooktop surface

element (some models)

Standard Dual element H()t surface

element (some models) indicator

You can use the left front surface element as either a small-diameter, lower-wattage

element or large-diameter, full-wattage

element.

Use both elements

for larger pans

Use small element-

To use both elements for larger pans:

Push in and turn control knob to the right

(clockwise) to the desired setting in the area

marked "DUAL". NOTE: You can turn the control knob in ei-

ther direction to reach "OFF'.

• The Warm Zone element will not glow red when it is on, unlike the surface elements.

However, the surface indicator light on the cooktop will glow.

• The Warm Zone element may be used whether the other elements are in use or

not.

• The quality of the food may deteriorate if it

is kept on the Warm Zone element for an extended period of time.

Using and Caring for Your Cooktop

To use the small element for smaller pans: Push in and turn control knob to the left

(counterclockwise) to the desired setting in the area marked "SINGLE".

Using the ceramic glass cooktop

Cooking on the ceramic glass cooktop is almost the same as cooking on coil surface

units. There are, however, a few differences:

• The cooking surface area will glow red

when the element is turned on. You will see the element cycling on and off - even

on the HI setting - to help the area stay at

the temperature setting you choose.

• Make sure the bottoms of pots and pans are clean and dry before cooking. Food and water particles left on the bottoms can

leave deposits on the cooktop when it is heated.

• Wiping off the cooktop before and after each use will help keep the surface free from stains and give you the most even

heating. See the "Cleaning tips" section.

• Do not cook foods directly on the cooktop.

• Lift pots and pans onto and off of the

cooktop. Sliding pots and pans on the

cooktop could leave marks that are difficult

to remove or could leave permanent marks.

• Do not cook popcorn that comes in pre-

packaged aluminum containers on the cooktop. The container could leave alumi- num marks on the cooktop that cannot be removed completely.

• Do not us•the cooktop as a cutting board,

• Do not allow anything that could melt,

such as plastic or aluminum foil, to come in contact with the cooktop while it is hot.

• Dropping a heavy or hard object on the cooktop could crack it. Be careful when us-

ing heavy skillets and large pots. Do not store jars or cans above the cooktop.

• Sugary spills and soils can cause pitting. See the "Cleaning tips" section.

Cookware tips

• Select a pan that is about the same size

as the surface cooking area. Cookware should not extend more than 1 inch

(2.5 cm) outside the area.

• For best results and greater energy

efficiency, use only fiat-bottomed

cookware that makes good contact with

the surface cooking area. Cookware with

rounded, warped, ribbed (such as some porcelain enamelware), or dented bottoms

could cause uneven heating and poor

cooking results.

• Cookware designed with slightlyindented

bottomsor small expansion channels can

be used.

• Cookware with non-stick finish has heating characteristics of the base material.

-,Check for rough spots on the bottom of metal or glass cookware which will scratch

the ceramic glass surface.

• Use flat bottom cookware for best heat conduction from the surface cooking area

to the cookware. Determine flatness with

the ruler test. Place the edge of a ruler across the bottom of the cookware. Hold it

up to the light. No light should be visible under the ruler. Rotate the ruler in all

directions and look for any light.

• Do not leave empty cookware, or

cookware that has boiled dry, on a hot

surface cooking area. The cookware

could overheat, causing damage to the

cookware or the surface cooking area.

'dsing and Caring for Your Cooktop

H I

Characteristics of cookware materials

The pan materialaffects how fast heat transfers from the surface cookingarea through the pan

material and howevenly heat spreads over the pan bottom. Choose pansthat providethe

best cooking results.

Aluminum • Heats quickly and evenly.

• Use for all types of cooking.

• Medium or heavy thickness isbest for most cooking.

• Used as a core or base in cookware to provide even heating.

Cast iron • Heats slowlyand evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

• Can be coated with porcelain enamel.

Ceramic or • Heats slowly and unevenly. ceramic glass • Use on low to medium settings.

Copper • Heats very quicklyand evenly.

• Follow manufacturer's instructions.

• Used as a core or base in cookware to provide even heating.

Earthenware • Can be used for cooktop cooking if recommended by the

manufacturer.

• Use on low settings.

Porcelain enamel-on-steel * See cast iron and stainless steel. or enamel-on-cast iron

Stainless steel • Heats quickly but unevenly.

• A core or base of aluminum or copper on the cookware

provides even heating.

• Can be coated with porcelain enamel.

r ing and Caring for Your Cooktop

ii ,,i

Home canning information

ce.wow _ Pan

Surface

unit

• Use the entire surface ("DUAL" setting) of

the left front surface cooking area for best o results.

• Use flat-bottomed canners on all types of cooktops, especially ceramic glass. Canners with rippled or ridged bottoms do

not allow good contact with the surface.

• Center the canner over the largest surface . cooking area. Do not extend more than 1 inch

(2.5 cm) outside the surface cooking area.

Large diameter canners/pans, if not centered correctly, will trap heat and result in damage to the cooktop. Do not place on two surface

cooking areas at the same time.

• The type of material the canner is made of determines the length of heating time. Refer

to the "Characteristics of cookware materials"

chart in this section for more information.

Caring for your cooktop

• When canning for long periods of time, allow elementsand the surrounding surfaces to

cool down.

• Alternate use of the surface cooking areas between batches or prepare small batches

at a time.

• Start with hot water, cover with a lid, and bring to a boil; then reduce heat to maintain

a boil or required pressure levels in a pressure canner.

• For up-to-date information on canning, In the United States, contact your local U.S. Government Agricultural Department

Extension Office or companies who manufacture home canning products. In Canada, contact Agriculture Canada.

This cooktop is designed for easy care.

However, ceramic glass cooktops need

to be maintained differently than standard

electric coil elements. Foods spilled directly on the cooktop will not bum off as on coil

elements. Because of this, the surface should be dust-free and soil-free before

heating.

Your cooktop has been prepolished at the factory for improved protection and

cleanability. The Cooktop Polishing Creme, a paper towel or a sponge is all you need to

clean your cooktop. For proper cleaning methods, please review the "How to keep your cooktop looking like new" chart. Follow

this chart after each use to ensure top performance and to preserve that uniquely elegant look.

NOTE: Let cooktop cool before cleaning.

fusing and Caring for Your Cooktop

Cleaning tips

What to use:

• Cooktop Polishing Creme included with

your cooktop with a paper towel or clean,

damp sponge. This creme has been developed especially for cleaning and polishing your cooktop. When using, follow

instructions on container.

• Razor scraper - Use to remove cooked- on soils from your ceramic glass cooktop.

To avoid scratches, keep the razor blade

as flat against the cooktop as possible. Store razor blades out of reach of

children. (Not included with your range.)

• Do not use steel wool, plastic cleaning pads, abrasive powdered cleansers,

chlorine bleach, rust remover, ammonia, or glass cleaning products with ammonia.

These products could damage the cooktop surface.

Steps to follow:

1. Most spills can be wiped off easily

using a paper towel or clean, damp sponge as soon as Hot Surface Indicator Light goes off.

2. For stubborn spills, rub Cooktop

Polishing Creme into cooked-on soil using a paper towel. If some soil remains,

leave some creme on the spot(s) and follow Step 3.

3. Carefully scrape spots with the razor

scraper.

4. Finish by polishing entire cooktop with Cooktop Polishing Creme and a paper towel.

To order Cooktop Polishing Creme (Part No. 3184477) or razor scraper (Part

No. 3183488), call 1-800-422-1230 (in Canada, 1-800-461-5681) and follow the instructions and telephone prompts you

hear.

NOTE: Always wipe and dry your cooktop

thoroughly after using cleanser to prevent

streaking or staining.

How to keep your cooktop looking like new:

IF THERE ARE WHAT TO DO

Sugary spills

and soils (such as jellies and candy syrups)

Burned-on soils

Dark streaks, specks, and

discoloration

Metal marks (from copper or

aluminum pans)

Tiny scratches or abrasions

To prevent pitting on the cooktop, wipe up

with a paper towel or clean, damp sponge

while ceramic glass surface is still warm.

Remove as soon as possible after spill

Occurs.

Rub Cooktop Polishing Creme or nonabrasive

cleanser into soil using a paper towel. Reapply

creme to spots remain- ing. Hold razor scraper

as flat to surface as

possible, scrape spots. Polish entire cooktop with creme and paper

towel. Rinse and dry.

Store razor blades out of reach of children,

Use Cool<top Polishing

Creme or nonabrasive

cleanser with a damp paper towel or sponge.

Use Cooktop Polishing

Creme or nonabrasive cleanser with a damp

paper towel or sponge before heating the cooktop again. If heated before cleaning, metal marks may not

come off.

Scratches and abra- sions do not affect

cooking. In time, they will become less visible

as a result of cleaning. To prevent scratches

and abrasions, use

Cooktop Polishing Creme regularly.

Using and Caring for Your Cooktop

i ri=i,if i ,,,if, ,,i iii I

Using and replacing the cooktop light

(on some models)

The fluorescent light is on the top of the control panel. The cooktop light switch is on the control panel. Press it to turn on the cooktop light. Press it again to turn light off.

Replacing the cooktop light:

1. Unplug range or disconnect power.

2. Flip up the top of the control panel.

If the cooktop light still does not work,

you may need to replace the starter. The

starter is a knob-shaped part located on the right side of the backguard, under the

light bulb. To remove and replace the starter, first remove light bulb. Push starter in and turn approximately 90°

counterclockwise. Pull starter out of

recessed area. You can find replacement

starters at stores that sell fluorescent tubes.

IIIII

4. Close the top panel.

5. Plug in range or reconnect power.

3. Grasp the fluorescent tube at both ends. Turn the tube approximately 90° in either

direction until both ends come out of the receptacles. Replace with a 20-watt cool-

white fluorescent tube.

sing and Caring forYour

Oven

This section tells you, step by step, how to operate all oven functions controlled by the

electronic control. Carefully follow these instructions, along with the cooking tips and cleaning information, for successful use of your range.

Using the electronic oven control

Oven display Timed and delayed Number Clock (see below) cooking pads pads set/start

Oven EASY CONVECT TM Convect setting conversion Full Meal pads pads pad

(pp. 28, 29, (pp. 40-45) (p, 37-39) 32, 34, 42,

44, 46, 53)

Display/clock

• When you first plug in the range, a tone will sound, the display will be fully litfor a few seconds, and the display will show the

last time set and =PF" (power failure). If, after you set the clock (see =Setting the clock"later in this section), the display

again shows "PF," your electricity was off

for a while. Reset the clock.

• The time display will show "Err" and 3

short tones will sound if a time or

temperature is incorrectly entered.

Time of day/ timer display Start

(pp. 22, 23) pad

Oven Timer pads Cancel/ Surface

light (pp. 22, 23) off pad light pad pad

' sing and Caring for Your Oven

Fahrenheit/Celsius

To set your oven to cook in Celsius instead of Fahrenheit:

1. Press and hold BROIL for 5

seconds.

Repeat to change from

Celsius to Fahrenheit.

If you need to convert temperatures from Celsius to Fahrenheit or vice versa, you

can refer to this chart:

Temperature replacement values

38°C=100°F 60°C=140°F 66°C=150°F 77°C=170°F

93°C=200°F 121°C=250°F 135°C=275°F 149°C=300°F

163°C=325°F

177°C=350°F

191°C--375°F

204°C=400°F

218°C=425°F 232°C=450°F

246°C--475°F 260°C-_500°F

PRESS

Disable/enable audible signals

Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed. To turn off key entry tone, end-of-cycle tone, and

reminder tones, follow these steps:

1. Press and hold STOP TIME for

5 seconds.

"Snd" and "Of_ will appear on the

display.

Repeat Step I to turn the signals

back on.

"Snd" and "On" will appear on the display.

PRESS

'_sing and Caring for Your Oven

Using the control lock

The control lock prevents unwanted use of the oven by disabling the control panel

command pads.

NOTES:

• Control lock is only available when oven is not in use or control has not been set. ,

• Control lock will not disable the Timer.

• Set control lock when cleaning the control panel to prevent oven from

accidentally turning on.

To lock or deactivate the control panel:

1. Press and hold CONTROL LOCK PRESS (Number Pad 3) for 5 seconds.

A single tone will sound and "START?" will appear on the display.

To unlock the control panel:

1. Press and hold CONTROL LOCK

(Number Pad 3) for 5 seconds. PRESS

A single tone will sound and "CONTROL

LOCK F_"will disappear from the display.

YOU SEE

Using and Caring for Your Oven

Using the Sabbath mode

What your oven will do while in the Sabbath mode:

• The time display will show "SAb" to tell you that the oven is in the Sabbath mode.

• The ON Indicator Light will light up when

the burner turns on and ON will go off

when the burner turns off.

• To prevent accidental key presses, the

key pads will only work after you press

them for 1 second.

• No tones will sound.

To enable the Sabbath mode:

1. Open the door.

2. Press CANCEL/OFF.

3. Press the Number Pads 7, 8,

and 9, in that order.

4. Press Number Pad 6.

5. Press START.

"SAb" and "On" will appear on the display.

PRESS

To disable the Sabbath mode:

Repeat the steps above to disable the

Sabbath mode. "SAb" and "Off" will appear on the display.

r sing and Caring for Your Oven

Setting your range for the Sabbath If you want to set your range to meet "no

work" requirements for the Sabbath, first

turn on the Sabbath mode (see 'qo enable the Sabbath mode" earlier in this section).

Then follow these steps:

Turn the oven light andlor surface light (if available) on

or off.

NOTE: See "Using and replacing the

surface light" in the "Using and Caring for Your Cooktop" section and "Using and replacing the oven light(s)" in the "Using. and Caring for Your Oven" section for

more information. These lights will stay turned on or off

(whichever you set) while in the Sabbath

mode. Opening the door will not turn on

the oven light if it is programmed to be off.

2. Press BAKE.

3. Press Number Pads to set the temperature you want.

Example for 325°F (163°C):

4. Start oven.

PRESS

+ 44 hidden pages