KitchenAid KERC500HWH, KERC506HWH, KERC507HBS Dimension Guide

KitchenAid KERC500HWH, KERC506HWH, KERC507HBS Dimension Guide

® 30" Freestanding Electric Range

PRODUCT MODEL NUMBERS

KERC500HWH

KERC506HWH

KERC507HBS

Electrical: Use 8-gauge solid copper wire. A four-wire or three-wire, single-phase, 120/240volt, 60-Hz, AC-only, electrical supply is required on a 50-ampere circuit, (or, if specified on the model/serial rating plate, a four-wire or three-wire, single-phase 120/208-volt, 60 Hz, AC-only electrical supply is available, a 40-ampere circuit), fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. The model/serial rating plate is located on the oven frame behind the door.

CABINET OPENING DIMENSIONS

OVERALL DIMENSIONS

 

46-13/16"

 

overall

 

height

26-3/8"

 

depth

36"

with

handle

cooktop

 

height

30" width

24-1/2"

Cabinet opening dimensions

 

 

 

 

 

 

 

 

 

 

 

25" countertop depth

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13" max.

 

 

 

 

 

For minimum

24" base cabinet depth

 

 

 

 

 

 

 

 

 

clearance to

 

 

 

 

 

 

 

 

 

 

 

upper cabinet depth

 

 

 

 

 

36" countertop height

 

 

 

 

 

 

 

the top of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the cooktop,

 

 

 

 

 

30" min. cabinet

 

 

 

 

 

see Note.*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

opening width

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18" upper

 

 

 

 

 

 

 

 

cabinet to

 

 

 

 

 

 

 

 

countertop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30-3/8"

 

 

 

 

 

 

 

 

 

opening

width

 

 

 

 

 

 

 

 

 

 

 

 

4" min. clearance from both sides of range to side wall or other combustible material.

wall receptacle or junction box –

8" to 22" from either cabinet,

7" max. from floor.

7/8" min. required between cutout and cabinet door or hinge.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. 9752387

Instructions packed with product. Specifications subject to change without notice.

06-01-02

Loading...