Kitchenaid KERC500G, KERC500H, KERC505G, KERC506H, KERC507G Dimension Guide

30" Freestanding Electric Range

®

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

KERC500G
KERC500H
KERC505G
KERC506H
KERC507G

KERC507H
KERC508L
KERI500G
KERS505G
KERS507G

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

Ref. 9757851

09-03-03

30" width

24-1/2"

46-13/16"

overall

height

26-3/8"

depth with

handle

36"

cooktop

height

wall receptacle or
junction box –
8" to 22" from either
cabinet,
7" max. from floor.

30" min. cabinet opening
width

For minimum
clearance to
the top of the
cooktop, see
NOTE.**

18" upper
cabinet to
countertop

13" max.

upper cabinet depth

4" min.
clearance from
both sides of
range to side
wall or other
combustible
material.

7/8" min.
required
between cutout
and cabinet
door or hinge.

30-3/8"
opening width

Cabinet opening dimensions:
25" countertop depth
24" base cabinet depth
36" countertop height

Electrical: Use 8 gauge copper wire or 6 gauge
aluminum wire. A four-wire or three-wire, single­phase, 120/240-volt, 60-Hz, AC-only, electrical
supply is required on a 40 amp circuit, (or, if
specified on the model/serial rating plate, a four­wire or three-wire, single-phase 120/208-volt,
60 Hz, AC-only electrical supply is available, a 40
amp circuit), fused on both sides of the line. A
time-delay fuse or circuit breaker is recommended.
The model/serial rating plate is located on the oven
frame behind the door.

**Note: 24" min. when bottom of wood or

metal cabinet is protected by not less than
1/4" flame retardant millboard covered with
not less than No.28 MSG sheet steel,

0.015" stainless steel, 0.024" aluminum or

0.020" copper.
30" min. clearance between the top of the

cooking platform and the bottom of an
unprotected wood or metal cabinet.