KitchenAid KERC100K Dimension Guide

®	30" Freestanding Electric Range

PRODUCT MODEL NUMBERS

KERC100K

Electrical: Use 8-gauge solid copper wire. A four-wire or three-wire, single-phase, 120/240volt, 60-Hz, AC-only, electrical supply is required on a 40-ampere circuit, (or, if specified on the model/serial rating plate, a four-wire or three-wire, single-phase 120/208-volt, 60 Hz, AC-only electrical supply is available, a 40-ampere circuit), fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. The model/serial rating plate is located on the oven frame behind the drawer.

OVERALL DIMENSIONS

888

27-1/8" depth with handle

46-7/8" overall height

36" cooktop height

24-13/16"

29-7/8" width

CABINET OPENING DIMENSIONS

18" min. clearance upper cabinet to countertop

4" min. countertop space to side wall or other combustible material

13" max. upper cabinet depth

30" min. cabinet		For minimum
opening width
		clearance to the
		top of the cooktop,
30-1/8" opening		see Note.**
width

			Do Not pinch the power
			supply cord between the
	Wall receptacle —
			range and the wall.
	8" to 22" from either
	cabinet, 5-1/2" max.		Do Not seal the range to
5-1/2"	from floor. Position		the side cabinets.
	receptacle as shown.
max.

**Note: 24" min. when bottom of wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

30" min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 8053714
Instructions packed with product. Specifications subject to change without notice.	08-20-02