KITCHENAID KECD807XBL, KECD807XSS, KECD867XBL, KECD867XSS Dimension Guide

30" (76.2 CM) AND 36" (91.4 CM) ELECTRIC DOWNDRAFT COOKTOP

PRODUCT MODEL NUMBERS

KECD807X

KECD867X

ELECTRICAL REQUIREMENTS:

A 4-wire or 3-wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply on a separate, 40-amp circuit breaker is required for both 30" (76.2 cm) and 36" (91.4 cm) models. If a fused system is used, fuse both sides of the line.

PRODUCT DIMENSIONS

CUTOUT DIMENSIONS

A.28⁄" (73.4 cm) maximum on 30" (76.2 cm) models 34⁄" (87.8 cm) maximum on 36" (91.4

B.21¹⁄" (53.7 cm) maximum

(91.4 cm) models	A	B
C. 8¹ ⁄" (21.8 cm) on 30"
(39.2 cm) on 36" (91.4 cm)
D. 6¹ ⁄" (16.0 cm) on both		D
(91.4 cm) models	C
E. 2" (5.1 cm) minimum space		E
edge of cooktop
F. Floor exhaust option		F
G. 6¹⁄" (15.6 cm) for 6"	H
(15.2 cm) vent system
5¹⁄" (13 cm) for 5"
(12.7 cm) vent system	I
H. 8¹ ⁄" (21.8 cm) on 30"
(76.2 cm) models	J
15⁄" (39.2 cm) on
	G
36" (91.4 cm) models

I.16" (40.6 cm) on both 30" (76.2 cm) and 36" (91.4 cm) models

J.Wall exhaust option

30" (76.2 cm) Cooktop - for standard and electric models

36" (91.4 cm) Cooktop - for standard and electric models

C

B

A

A.Model/serial rating/clearance plate location

B.21" (53.4 cm) screw head to screw head

C.22" (52.3 cm) without stainless steel trim or 21³ ⁄" (54.8 cm) with stainless steel trim

C

B

A

A.Model/serial rating/clearance plate location

B.21" (53.4 cm) screw head to screw head

C.22" (52.3 cm) without stainless steel trim or 21³ ⁄" (54.8 cm) with stainless steel trim

A

		B
H
G
F
	E	C
		D
A. 29³⁄" (75.6 cm)		E. 12¹⁄" (31.8 cm)
B. 12¹⁄" (31.8 cm)		F. 2" (5.1 cm) recommended minimum
centerline of product to		cabinet to motor clearance
edge of burner box		G. 18" (45.7 cm)
C. 12¹⁄" (31.8 cm)		H. 4⁄" (11.8 cm)
D. 28³⁄" (72.1 cm)

		A
		B
	H
	G
	F
	E	C
		D

A. 35¹¹⁄" (89.8 cm)	E. 12¹⁄" (31.8 cm)
B. 12⁄" (32.8 cm) centerline of	F. 8¹ ⁄" (20.9 cm)
product to edge of burner box	recommended minimum
C. 12⁄" (32.8 cm)	cabinet to motor clearance
D. 34¹⁄" (86.7 cm)	G. 18" (45.7 cm)
	H. 4⁄" (11.8 cm)

Page 1 of 2

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10439665A
Instructions packed with product. Specifications subject to change without notice.	12-13-11

CABINET DIMENSIONS

A

A. 30" (76.2 cm) on 30" (76.2 cm) models 36" (91.4 cm) on 36" (91.4 cm)

D

models

B. Combustible area above countertop (shown by dashed box above)

C. 30" (76.2 cm) minimum clearance between top of cooktop platform and

bottom of uncovered wood or metal cabinet (24" [61 cm] minimum

clearance if bottom of wood or metal cabinet is covered by not less

than ¹⁄" [0.6 cm] flame retardant millboard covered with not less than

C

B

No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or 0.024"

[0.06 cm] aluminum or 0.020" [0.05 cm] copper)

D. 13" (33 cm) recommended upper cabinet depth

E. 2" (5.1 cm)

L

G

F

F. 21¹⁄" (73.4 cm)

E

G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop

within minimum horizontal clearances to cooktop

H

H. Junction box or outlet; 12" (30.5 cm) minimum from bottom of

countertop

I

I. Junction box or outlet; 10" (25.4 cm) from right-hand side of cabinet

K

J

J. 28⁄" (73.4 cm) on 30" (76.2 cm) models 34⁄" (87.8 cm) on 36"

(91.4 cm) models

K. 2¹⁄" (6.4 cm) minimum distance to nearest left and right side

combustible surface above cooktop

L. 1¹⁄" (3.8 cm) minimum clearance between back wall and countertop

NOTES: After making the countertop cutout, some installations may require

notching down the base cabinet side walls to clear the cooktop base. To avoid this

modification, use a base cabinet with sidewalls wider than the cutout.

● A minimum side clearance of 6" (15.2 cm) is recommended between side of

cooktop and side wall for maximum ventilation performance.

● A minimum clearance of 2" (5.1 cm) is recommended between the motor/blower

and cabinet for proper cooling. A 6" (15.2 cm) clearance is recommended for

servicing access.

		Page 2 of 2
Because Whirlpool Corporation policy includes a continuous commitment to improve	Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10439665A
our products, we reserve the right to change materials and specifications without notice.	Instructions packed with product. Specifications subject to change without notice.	12-13-11