KITCHENAID KECC051H, KECC501G, KECC502G, KECC507G, KECC507H Dimension Guide
...
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
KECC051H
KECC501G
KECC502G
KECC507G
KECC507H
KECC507K
KECC508G
KECC508M
KECC562G
KECC563H
KECC567G
KECC567H
KECC567K
KECC568G
KECC568M
Electrical:
240-volt cooktop: A three-wire or four-wire, single
phase, 240-volt, 60-Hz, AC-only electrical supply is
required on a separate, 40-ampere circuit, 8-gauge
wire (note: the KECC051 series requires a 20
ampere circuit, 12-gauge wire), fused on both
sides of the line. Use copper wire only. A timedelay fuse or circuit breaker is recommended.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 8285316
10-15-02
21-5/16"
(54.1 cm)
depth
30" (76.2 cm) or
36" (91.4 cm) width
3/4" (1.9 cm)
both sides
2-7/8" (7.3 cm)
burner box
height
15"
(38.1 cm)
2-7/8" (7.3 cm)
burner box height
3/4" (1.9 cm)
both sides
21-5/16"
(54.1 cm)
depth
Junction box, or
outlet –
12" (30.5 cm) min.
from bottom of countertop.
10" (25.4 cm) from right side
of cabinet.
18" (45.7 cm) min.
clearance upper
cabinet to countertop
within minimum
clearances to cooktop
Do not seal
cooktop to
countertop.
back edge
of cutout
rear of cabinet or
rear wall under
countertop
KECC051
series only
11/16"
(1.7 cm)
min.
2" min.
(5.1 cm)
13" (33 cm)
recommended
upper cabinet
depth
1" (2.5 cm) min. distance to
nearest left and right side
combustible surface above
cooktop.
See NOTE*
for minimum
clearances.
combustible area
above
countertop
*
Note: 24" (61 cm) min.
clearance if bottom of wood or
metal cabinet is protected by
not less than 1/4" (0.6 cm)
flame retardant millboard
covered with not less than No.
28 MSG sheet steel, 0.015"
(0.04 cm) stainless steel, or
0.024"(0.06 cm) aluminum or
0.020" (0.05 cm) copper.
30" (76.2 cm) min. clearance
between top of cooking
platform and bottom of
unprotected wood or metal
cabinet.
15" 14-1/2" 15" 1-1/2" max
(38.1 cm) (36.6 cm) (38.1 cm) (3.8 cm)
30" 29-1/2" 30"
(76.2 cm) (75 cm) (76.2 cm)
—
36" 35-1/2" 36"
(91.4 cm) (90.2 cm) (91.4 cm)
—
Cooktop width
Illustration dimensions
20-1/2"
(52 cm)
Note: If cabinet has a drawer, a 3" (7.5 cm) depth
clearance from the countertop to the top of the
drawer (or other obstruction) in base cabinet is
required.
Important note on base cabinet construction:
After making the countertop cutout, some
installations may require notching down the base
cabinet side walls to clear the burner box.To avoid
this modification, use a base cabinet having
sidewalls wider than the cutout.
Electric Built-in Cooktop
®
Loading...