® Electric Built-in Ceramic Cooktop
PRODUCT MODEL NUMBERS
KECC051HBL KECC508GBL KECC567KSS KECC051HBT KECC508GBT KECC567KWW KECC051HWH KECC508GSS KECC568GBL KECC502GBL KECC508GWH KECC568GBT KECC502GBT KECC508GWW KECC568GSS KECC502GWH KECC562GBL KECC568GWH KECC507KBL KECC562GBT KECC568GWW KECC507KBT KECC562GWH
KECC507KSS KECC567KBL
KECC507KWW KECC567KBT
Electrical:
240-volt cooktop: A three-wire or four-wire, single phase, 240-volt, 60-Hz, AC-only electrical supply is required on a separate, 40-ampere circuit (note: the KECC051 series requires a 20 ampere circuit), fused on both sides of the line. Use 8 gauge (note: the KECC051 series uses 12 gauge) copper wire only. A time-delay fuse or circuit breaker is recommended.
Grommet is required for electrical cable or power supply cord hole cut in a metal cabinet.
CABINET OPENING DIMENSIONS
OVERALL DIMENSIONS
3/4" (1.9 cm) 15" (38.1 cm) both sides 30" (76.2 cm) or
36" (91.4 cm) width
2-7/8" (7.3 cm) burner box height
21-5/16"
(54.1 cm) depth
Important note on base cabinet construction: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the burner box. To avoid this modification, use a base cabinet having sidewalls wider the the cutout.
Note: If cabinet has a drawer, a 3" (7.5 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required.
|
Illustration |
|
|
See NOTE* |
||
|
dimensions |
|
|
for minimum |
||
|
|
|
clearances. |
|||
Cooktop width |
|
|
|
|
|
|
|
|
|
|
|
|
|
15" |
14-1/2" |
15" |
|
|
|
|
(38.1 cm) |
(36.6 cm) |
(38.1 cm) |
|
|
|
|
30" |
29-1/2" |
30" |
|
|
|
|
Do not seal |
||||||
(76.2 cm) |
(75 cm) |
(76.2 cm) |
|
cooktop to |
|
|
36" |
35-1/2" |
36" |
|
countertop. |
|
|
|
|
|
|
|||
(91.4 cm) |
(90.2 cm) |
(91.4 cm) |
|
|
|
|
|
|
|
*Note: 24" (61 cm) min. clearance if bottom of wood or metal cabinet is protected by not less than 1/4" (0.6 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.04 cm) stainless steel, or 0.024"(0.06 cm) aluminum or 0.020" (0.05 cm) copper.
30" (76.2 cm) min. clearance between top of cooking platform and bottom of unprotected wood or metal cabinet.
|
13" (33 cm) |
|
|
recommended |
|
combustible area |
upper cabinet |
|
depth |
||
above |
||
countertop |
18" (45.7 cm) min. |
|
|
||
|
clearance upper |
|
|
cabinet to countertop |
|
|
within minimum |
|
|
clearances to cooktop |
20-1/2" 2" min. (52 cm) (5.1 cm)
Junction box, or outlet –
12" (30.5 cm) min.
from bottom of countertop. 10" (25.4 cm) from right side
of cabinet.
1" (2.5 cm) min. distance to nearest left and right side combustible surface above cooktop.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. 4455836 |
Instructions packed with product. Specifications subject to change without notice. |
02-28-02 |