KitchenAid KECC051HBL, KECC051HBT, KECC051HWH, KECC502GBL, KECC502GBT Dimension Guide

...

Electric Built-in Ceramic Cooktop

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

KECC051HBL KECC051HBT KECC051HWH KECC502GBL KECC502GBT KECC502GWH KECC507KBL KECC507KBT KECC507KSS KECC507KWW

KECC508GBL KECC508GBT KECC508GSS KECC508GWH KECC508GWW KECC562GBL KECC562GBT KECC562GWH KECC567KBL KECC567KBT

KECC567KSS KECC567KWW KECC568GBL KECC568GBT KECC568GSS KECC568GWH KECC568GWW

Electrical:

240-volt cooktop: A three-wire or four-wire, single phase, 240-volt, 60-Hz, AC-only electrical supply is required on a separate, 40-ampere circuit (note: the KECC051 series requires a 20 ampere circuit), fused on both sides of the line. Use 8 gauge (note: the KECC051 series uses 12 gauge) copper wire only. A time-delay fuse or circuit breaker is recommended.

Grommet is required for electrical cable or power supply cord hole cut in a metal cabinet.

21-5/16"

(54.1 cm)

depth

15" (38.1 cm) 30" (76.2 cm) or 36" (91.4 cm) width

3/4" (1.9 cm) both sides

2-7/8" (7.3 cm)

burner box

height

Junction box, or outlet – 12" (30.5 cm) min. from bottom of countertop. 10" (25.4 cm) from right side of cabinet.

18" (45.7 cm) min.

clearance upper

cabinet to countertop

within minimum

clearances to cooktop

Do not seal cooktop to countertop.

2" min. (5.1 cm)

13" (33 cm) recommended upper cabinet depth





1" (2.5 cm) min. distance to

nearest left and right side

combustible surface above

cooktop.

See NOTE* for minimum clearances.

combustible area

above

countertop

Note: 24" (61 cm) min. clearance if bottom of wood or metal cabinet is protected by not less than 1/4" (0.6 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.04 cm) stainless steel, or 0.024"(0.06 cm) aluminum or 0.020" (0.05 cm) copper.

30" (76.2 cm) min. clearance between top of cooking platform and bottom of unprotected wood or metal cabinet.

Cooktop width

Illustration

dimensions

20-1/2" (52 cm)

Important note on base cabinet construction: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the burner box. To avoid this modification, use a base cabinet having sidewalls wider the the cutout. Note: If cabinet has a drawer, a 3" (7.5 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required.



15" 14-1/2" 15"

(38.1 cm) (36.6 cm) (38.1 cm)

30" 29-1/2" 30"

(76.2 cm) (75 cm) (76.2 cm)

36" 35-1/2" 36"

(91.4 cm) (90.2 cm) (91.4 cm)

Ref. 4455836

02-28-02

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.