KitchenAid KECC056, KECC506, KECC507 User Manual

0 (0)

ELECTRIC COOKTOP

Use &Care Guide

For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 or visit our website at

www.kitchenaid.com

In Canada, call 1-800-807-6777 or visit our website at www.KitchenAid.ca

TABLE DE CUISSON ÉLECTRIQUE

Guide d’utilisation etd’entretien

Au Canada, pour assistance, installation ou service, composer le 1-800-807-6777 ou visiter notre site Web au www.KitchenAid.ca

Table of Contents/Table des matières.............................................................................2

Models/Modèles KECC056 KECC506 KECC507 KECC508 KECC566 KECC567 KECC568 KECV568

8286067A

NOTE: This manual covers different models. Refer to the Table of Contents for information regarding your cooktop model. REMARQUE : Ce manuel couvre différents modèles. Consulter la Table des matières pour des renseignements concernant le modèle

de votre table de cuisson.

TABLE OF CONTENTS

COOKTOP SAFETY........................................................................3

PARTS AND FEATURES -

TOUCH-ACTIVATED ELECTRONIC CONTROLS .......................5

COOKTOP CONTROLS -

TOUCH-ACTIVATED ELECTRONIC CONTROLS .......................6

Dual/Triple Element......................................................................6

Bridge Element............................................................................. 7

Control Lock/All Off......................................................................7

Melt & Hold Function ...................................................................7

Keep Warm Function ...................................................................7

PARTS AND FEATURES - CUSTOM CONTROLS ......................8

COOKTOP CONTROLS - CUSTOM CONTROLS........................9

Dual/Triple Element....................................................................10

Bridge Element...........................................................................10

Warm Function...........................................................................10

PARTS AND FEATURES -

TRADITIONAL KNOB CONTROLS .............................................11

COOKTOP CONTROLS -

TRADITIONAL KNOB CONTROLS .............................................12

Dual/Triple Element....................................................................12

Bridge Element (on 36" [91.4 cm] models) ................................13

COOKTOP USE ............................................................................13

Ceramic Glass............................................................................13

Home Canning ...........................................................................14

Cookware ...................................................................................14

COOKTOP CARE..........................................................................14

General Cleaning........................................................................14

TROUBLESHOOTING ..................................................................15

ASSISTANCE OR SERVICE.........................................................16

In the U.S.A. ...............................................................................16

In Canada ...................................................................................16

WARRANTY ..................................................................................17

TABLE DES MATIÈRES

SÉCURITÉ DE LA TABLE DE CUISSON ....................................18

PIÈCES ET CARACTÉRISTIQUES -

COMMANDES ÉLECTRONIQUES TACTILES ...........................20

COMMANDES DE LA TABLE DE CUISSON -

COMMANDES ÉLECTRONIQUES TACTILES ...........................21

Élément double/triple .................................................................22

Élément de pont .........................................................................22

Control Lock/All Off (verrouillage des commandes/toutes

commandes éteintes).................................................................23

Fonction Melt & Hold (fondre et garder) ....................................23

Fonction Keep Warm (maintien au chaud) ................................23

PIÈCES ET CARACTÉRISTIQUES -

COMMANDES PERSONNALISÉES ............................................24

COMMANDES DE LA TABLE DE CUISSON -

COMMANDE PERSONNALISÉE.................................................25

Élément double/triple .................................................................26

Élément de pont .........................................................................27

Fonction Warm (maintien au chaud) ..........................................27

PIÈCES ET CARACTÉRISTIQUES -

COMMANDES À BOUTON STANDARD.....................................28

COMMANDES DE LA TABLE DE CUISSON -

COMMANDES À BOUTON STANDARD.....................................29

Élément double/triple .................................................................30

Élément de pont .........................................................................30

UTILISATION DE LA TABLE DE CUISSON................................31

Vitrocéramique ...........................................................................31

Préparation de conserves à la maison.......................................31

Ustensiles de cuisson ................................................................32

ENTRETIEN DE LA TABLE DE CUISSON ..................................32

Nettoyage général ......................................................................32

DÉPANNAGE.................................................................................33

ASSISTANCE OU SERVICE.........................................................34

GARANTIE.....................................................................................35

COOKTOP SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

follow instructions.

can be killed or seriously injured if you don't

You instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the cooktop, follow basic precautions, including the following:

■ CAUTION: Do not store items of interest to children in

cabinets above a cooktop – Children climbing on the cooktop to reach items could be seriously injured.

■ Proper Installation – Be sure your cooktop is properly

installed and grounded by a qualified technician.

■ Never Use Your Cooktop for Warming or Heating the

Room.

■ Do Not Leave Children Alone – Children should not be left

alone or unattended in area where cooktop is in use. They should never be allowed to sit or stand on any part of the cooktop.

■ Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the cooktop.

■ User Servicing – Do not repair or replace any part of the

cooktop unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.

■ Storage on Cooktop – Flammable materials should not be

stored near surface units.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.

■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS – Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among those areas are the cooktop and surfaces facing the cooktop.

■ Use Proper Pan Size – This cooktop is equipped with one

or more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper relationship of utensil to burner will also improve efficiency.

■ Never Leave Surface Units Unattended at High Heat

Settings – Boilover causes smoking and greasy spillovers that may ignite.

■ Glazed Cooking Utensils – Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cooktop service without breaking due to the sudden change in temperature.

■ Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.

■ Do Not Cook on Broken Cooktop – If cooktop should

break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.

■ Clean Cooktop With Caution – If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.

For units with ventilating hood –

■ Clean Ventilating Hoods Frequently – Grease should not

be allowed to accumulate on hood or filter.

■ When flaming foods under the hood, turn the fan on.

For units with coil elements –

■ Make Sure Reflector Pans or Drip Bowls Are in

Place – Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.

■ Protective Liners – Do not use aluminum foil to line surface

unit drip bowls, except as suggested in the manual. Improper installation of these liners may result in a risk of electric shock, or fire.

■ Do Not Soak Removable Heating Elements - Heating

elements should never be immersed in water.

SAVE THESE INSTRUCTIONS

PARTS AND FEATURES -

TOUCH-ACTIVATED ELECTRONIC CONTROLS

Control Panels

30" (76.2 cm) Touch-Activated Electronic Controls 36" (91.4 cm) Touch-Activated Electronic Controls

A B

A. Left rear control (simmer; keep

warm function; melt and hold function)

B. Right rear control (simmer; keep

warm function; melt and hold function; dual circuit element)

C. Increase/decrease temperature

control

D. Hot surface indicator light

E. Right front control

(simmer; keep warm function; melt and hold function)

F. Control Lock/All Off

G. Left front control (simmer;

keep warm function; melt and hold function; triple-circuit element)

Cooktops

36" (91.4 cm) Touch-Activated Electronic Control model shown

A. Left rear control (simmer; keep

warm function; melt and hold function)

B. Center rear control (simmer; keep

warm function; melt and hold function; dual circuit element “bridge”)

C. Right rear control (simmer; keep

warm function; melt and hold function)

D. Increase/decrease

temperature control E. Hot surface indicator lights F. Right front control

(simmer; keep warm function;

melt and hold function)

G. Control Lock/All Off H. Left front control (simmer;

keep warm function; melt and

hold function;

triple-circuit element)

A. Ceramic glass cooktop (stainless steel or

painted metal trim on some models) B. Left rear surface cooking area C. Center rear surface cooking area (with

dual-circuit element “bridge”)

D. Right rear surface cooking area

E. Control panel F. Right front surface cooking area

G. Left front surface cooking area

(with triple-circuit element)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

COOKTOP CONTROLS -

TOUCH-ACTIVATED ELECTRONIC CONTROLS

SETTING RECOMMENDED USE

WARNING

Lo SIMMER

■ Provide lowest simmer/heat

setting.

■ Simmer (range of simmer

temperatures).

Fire Hazard

Turn off all controls when done cooking. Failure to do so can result in death or fire.

The touch-activated electronic controls offer a variety of heat settings for optimal cooking results. When melting foods such as chocolate or butter, or when proofing bread, the surface cooking area can be set to MELT & HOLD for minimal element operation.

For maximum element operation, all cooktop touch-activated electronic controls can be set to HI when bringing liquids to a fast and rapid boil. Touch the “minus” (-) keypad to immediately reach the HI setting.

NOTE: Where 240V installation is not available, this cooktop will automatically adjust to 208V operation.

To U se:

1. Touch ON/OFF.

2. Touch the “plus” (+) or “minus” (-) keypads to increase or

decrease power.

3. To choose a power level between HI and MELT & HOLD,

touch and hold either the “+” or “-” keypad until the desired level has been reached.

4. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all elements at the same time.

Use the following chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

■ Start food cooking.

■ Bring liquid to a boil.

Keep Warm

Melt & Hold

Dual/Triple Elements

REMEMBER: When cooktop is in use, the entire cooktop area may become hot.

■ Keep cooked foods warm.

■ Melt chocolate or butter.

■ Home canning.

■ Large-diameter cookware.

■ Large quantities of food.

Hot Surface Indicator Lights

The Hot Surface Indicator Lights are located next to each of the cooktop controls. The Hot Surface Indicator Lights will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off.

A. Hot surface indicator light

If the cooktop is on when a power failure occurs, the Hot Surface Indicator Lights will remain on up to 45 minutes after the power is restored to the cooktop.

Dual/Triple Element

The dual and triple elements offer flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual and triple sizes combine single, dual and outer element and are recommended for larger cookware, large quantities of food, and home canning.

Medium High Between Med & Hi

Med Medium

Medium Low Between Med & Lo

■ Hold a rapid boil.

■ Quickly brown or sear food.

■ Maintain a slow boil.

■ Fry or sauté foods.

■ Cook soups, sauces and

gravies.

■ Stew or steam food.

A B

A. Single size B. Dual size C. Triple size

To U se:

1. Touch ON/OFF.

2. Touch HEAT ZONE SIZE to select desired zone diameter.

3. Choose a power level between HI and MELT & HOLD. Touch

the “plus” (+) or “minus” (-) keypad to increase or decrease power.

4. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all elements at the same time.

Bridge Element

(on 36"[91.4 cm]models)

The bridge element allows maximum flexibility in the center cooking area.

Use the bridge area to create an oblong heated area to cook with large cookware.

Control Lock/AllOff

The Control Lock/All Off cooktop touch controls turn off all surface cooking areas that are in use at the same time.

The Control Lock cooktop control prevents unintended use of the surface cooking areas. When the cooktop is locked out, the surface cooking areas cannot be turned on by the cooktop touch controls.

To Lock Cooktop: Touch and hold the CONTROL LOCK/ ALL OFF keypad for 5 seconds. After 5 seconds, CONTROL LOCK will glow red, indicating that the cooktop controls are in the lockout position.

To Unlock Cooktop: Touch and hold the CONTROL LOCK/ ALL OFF keypad for 5 seconds.

Melt &Hold Function

The Melt & Hold function is available on all the surface cooking elements, and is ideal for melting chocolate or butter.

To U se:

1. Touch ON/OFF.

2. Touch the “plus” (+) keypad once for MELT & HOLD.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area.

A. Single size B. Bridge area C. Single size

To use SINGLE (A) or SINGLE and BRIDGE (A + B):

1. Touch ON/OFF (center rear control).

2. Touch HEAT ZONE SIZE once for SINGLE and BRIDGE (A+B)

or twice for SINGLE (A).

3. Choose a power level between HI and MELT & HOLD. Touch

the “plus” (+) or “minus” (-) keypads to increase or decrease power.

4. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all elements at the same time.

To use SINGLE (C):

1. Touch ON/OFF (right front control).

2. Choose a power level between HI and MELT & HOLD. Touch

the “+” or “-” keypads to increase or decrease power.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area, or touch ALL OFF to turn off all elements at the same time.

To use both Single elements and Bridge (A+B+C):

1. Turn on Single and Bridge (A+B).

2. Turn on Single (C).

3. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all elements at the same time.

Keep Warm Function

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

The Keep Warm function can be used to keep cooked foods warm, and may be used whether or not the other surface cooking zones are in use. One hour is the recommended maximum time to maintain food quality.

It is not recommended for heating cold foods. When the Keep Warm function is in use, it will not glow red like the cooking zones, but the indicator light will glow on the control panel.

Use only cookware and dishes recommended for oven and cooktop use, and those that have flat bottoms to make direct contact with the cooktop surface. Use pot holders or oven mitts to remove cookware.

Cover all foods with a lid or aluminum foil. Do not use plastic wrap to cover food, as it may melt onto the cooktop surface. When warming baked goods, allow a small opening in the cover for moisture to escape.

Food quality may deteriorate if food is kept on the Keep Warm function for an extended period of time. For best results, keep food warm for no longer than 30 to 45 minutes.

On models with touch-activated controls, the Keep Warm element is available on all surface cooking areas, and can be used as either an element for warming foods, or for normal element operation.

To U se:

1. Touch ON/OFF.

2. Touch the “plus” (+) keypad twice for KEEP WARM.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area.

PARTS AND FEATURES - CUSTOM CONTROLS

Control Panels

30" (76.2 cm) Custom Controls 36" (91.4 cm) Custom Controls

A. Left rear control (simmer; keep

warm function; melt function)

B. Right rear control (simmer; keep

warm function; melt function; dual-circuit element)

C. Hot surface indicator light

D. Right front control (simmer;

keep warm function; melt function)

E. Power on light

F. Left front control (simmer;

keep warm function; melt function; triple-circuit element)

A. Left rear control (simmer; keep

warm function; melt function)

B. Center rear control (simmer; keep

warm function; melt function; dual circuit element “bridge”)

C. Right rear control (simmer; keep

warm function; melt function)

D. Hot surface indicator lights

E. Right front control (simmer;

keep warm function; melt function)

F. Power on light

G. Left front control (simmer;

keep warm function; melt function; triple-circuit element)

Cooktops

36" (91.4 cm) Custom Control model shown

A. Ceramic glass cooktop (stainless steel

models have metal trim) B. Left rear surface cooking area C. Center rear surface cooking area (with

dual-circuit element “bridge”)

D. Right rear surface cooking area

E. Control panel F. Right front surface cooking area

G. Left front surface cooking area

(with triple-circuit element)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

COOKTOP CONTROLS - CUSTOM CONTROLS

Use the following chart as a guide when setting heat levels.

WARNING

SETTING RECOMMENDED USE

Fire Hazard

Turn off all controls when done cooking. Failure to do so can result in death or fire.

The Custom Control system offers a variety of heat settings for optimal cooking results. When melting foods such as chocolate or butter, or when proofing bread, the surface cooking area can be set to MELT for minimal element operation.

To keep cooked foods warm or to heat serving dishes, the surface cooking area can be set to WARM.

For maximum element operation, all Custom Controls can be set to HI when bringing liquids to a fast and rapid boil.

NOTE: Where 240V installation is not available, this cooktop will automatically adjust to 208V operation.

Medium High Between Med & Hi

Med Medium

■ Bring liquid to a boil.

■ Hold a rapid boil.

■ Quickly brown or sear food.

■ Maintain a slow boil.

■ Fry or sauté foods.

■ Cook soups, sauces and

gravies.

Medium Low

■ Stew or steam food.

Between Med & Lo

Lo SIMMER

Warm

■ Simmer (range of simmer

temperatures).

■ Keep cooked foods warm.

Melt ■ Melt chocolate or butter.

Dual/Triple Elements

■ Home canning.

■ Large-diameter cookware.

■ Large quantities of food.

REMEMBER: When cooktop is in use, the entire cooktop area may become hot.

To U se:

1. The cooktop control can be set to anywhere between HI and

MELT.

2. Push in and turn to desired setting.

Hot Surface Indicator Lights

The Hot Surface Indicator Lights are located next to each of the cooktop control knobs. The Hot Surface Indicator Lights will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off.

A. Hot surface indicator light

If the cooktop is on when a power failure occurs, the Hot Surface Indicator Lights will remain on after the power is restored to the cooktop. They will remain on until the cooktop has cooled completely.

Power Light

Each cooktop has a Power On light. The light will glow when any burner is on.

Dual/Triple Element

A B

To use SINGLE (A):

1. Push in and turn center rear knob from OFF position to the

SINGLE zone anywhere between MELT and HI.

2. Turn knob to OFF when finished. To use SINGLE and BRIDGE area (A + B):

1. Push in and turn center rear knob from OFF position to the

BRIDGE zone anywhere between MELT and HI.

2. Turn knob to OFF when finished. To use SINGLE (C):

1. Push in and turn right front knob from OFF position anywhere

between MELT and HI.

2. Turn knob to OFF when finished. To use both Single elements and Bridge (A+B+C):

1. Turn on Single and Bridge (A+B).

2. Tur n on Sin gle ( C).

3. Turn knob to OFF when finished.

A. Single size

B. Dual size C. Triple size

To Use SINGLE:

1. Push in and turn knob from the OFF position to the SINGLE

zone anywhere between MELT and HI.

2. Turn knob to OFF when finished.

To U se D UAL :

1. Push in and turn knob from the OFF position to the DUAL

zone anywhere between WARM and HI.

2. Turn knob to OFF when finished.

To U se T RIP LE:

1. Push in and turn knob from the OFF position to the TRIPLE

zone anywhere between MELT and HI.

2. Turn knob to OFF when finished.

Bridge Element

(on 36"[91.4 cm]models)

The bridge element allows maximum flexibility in the center cooking area.

Use the bridge area to create an oblong heated area to cook with large cookware.

Warm Function

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

The Warm function can be used to keep cooked foods warm, and may be used whether or not the other surface cooking zones are in use. One hour is the recommended maximum time to maintain food quality.

It is not recommended for heating cold foods. Use only cookware and dishes recommended for oven and

cooktop use, and that have flat bottoms to make direct contact with the cooktop surface. Use pot holders or oven mitts to remove cookware.

Food quality may deteriorate if food is kept on the Warm function for an extended period of time. For best results, keep food warm for no longer than 30 to 45 minutes.

The Warm element is available on all surface cooking areas, and can be used as either an element for warming foods, or for normal element operation.

To U se:

1. Rotate knob to WARM position.

2. When finished cooking, turn knob to OFF position.

A. Single size B. Bridge area C. Single size

Control Panels

30" (76.2 cm) Traditional Knob Controls 36" (91.4 cm) Traditional Knob Controls

PARTS AND FEATURES -

TRADITIONAL KNOB CONTROLS

A. Left rear control knob B. Right rear control knob

(dual-circuit element)

C. Hot surface indicator light

DEF

D. Right front control knob

E. Power on light F. Left front control knob

(triple-circuit element)

A. Left rear control knob

B. Center rear control knob

(dual-circuit element “bridge”)

C. Right rear control knob

D. Hot surface indicator lights

E. Right front control knob F. Power on light

G. Left front control knob

(triple-circuit element)

Cooktops

36" (91.4 cm) Traditional Knob model shown

A. Ceramic glass cooktop (stainless steel

models have metal trim) B. Left rear surface cooking area C. Center rear surface cooking area (with

dual-circuit element “bridge”)

D. Right rear surface cooking area

E. Control panel F. Right front surface cooking area

G. Left front surface cooking area

(with triple-circuit element)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

+ 25 hidden pages