KitchenAid KEBS279B Guide

PRODUCT MODEL SERIES PRODUCT DIMENSIONS

KEBK101B KEBK171B KEBK206B KEBK276B

KEBS109B KEBS179B KEBS207B KEBS209B

KEBS277B KEBS279B

Electrical:

To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

●

Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial number rating plate is located under the control panel on single ovens and under the control panel on the upper oven cavity on double ovens. See the following illustrations.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

Ref. W10351242B

7/26/12

27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC SINGLE AND DOUBLE BUILT-IN OVEN

Page 1 of 2

●

Models rated from 7.3 to 9 kW at 240 volts (5.4 to 7.4 kW at 208 volts) require a separate 40-amp circuit. Models rated at

4.8 kW and below at 240 volts (3.6 kW and below at 208 volts) require a separate 20-amp circuit.

●

A circuit breaker is recommended.

●

Connect directly to the circuit breaker box (or fused disconnect) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See “Make Electrical Connection” section.

●

Flexible conduit from the oven should be connected directly to the junction box.

●

Fuse both sides of the line.

●

Do not cut the conduit. The length of conduit provided is for serviceability of the oven.

●

A UL listed or CSA approved conduit connector must be provided.

●

If the house has aluminum wiring, follow the procedure below:

1. Connect a section of solid copper wire to the ends of the flexible conduit leads.

2. Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

For power requirements for models WOS51EC7A, WOS51EC0A, WOD51EC7A, WOD51EC0A, WOS92EC7A, WOS92EC0A, WOD93EC7A, and WOD93EC0A, refer to the following table.

Voltage Single Single Double Double

Thermal Convect Thermal Convect

240 VAC 3690 W 3720 W 7370 W 7400 W 208 VAC 2790 W 2820 W 5580 W 5610 W 240 VAC 15.4 A 15.5 A 30.7 A 30.8 A 208 VAC 13.4 A 13.6 A 26.8 A 27.0 A

Single Oven

A. Model/serial number plate

Double Oven

A. Model/serial number plate

³⁄₄

¹⁄₂

" (67.9 cm) recessed

³⁄₄

" (59.1 cm) max. recessed

¹⁄₄

27" (68.6 cm) models

A. 28¾" (72.8 cm) max. overall

³⁄₄

height

B. 25

" (64.6 cm) max. recessed

⁷⁄₁₆

width

C. 26

" (67.9 cm) recessed

³⁄₄

height

D. 23

" (59.1 cm) max. recessed

¹⁄₄

depth

E. 27" (68.6 cm) overall width

30" (76.2 cm) models

A. 28¾" (72.8 cm) max. overall

height

B. 28½" (72.4 cm) max. recessed

width

C. 26

height

D. 23

depth

E. 30" (76.2 cm) overall width

27" (68.6 cm) models

A. 51

" (130.0 cm) max. overall

³⁄₁₆

height

B. 25

" (64.6 cm) max.

⁷⁄₁₆

recessed width

C. 48

" (124.0 cm) recessed

¹³⁄₁₆

height

D. 23

" (59.1 cm) max.

¹⁄₄

recessed depth

E. 27" (68.6 cm) overall width

30" (76.2 cm) models

A. 51

" (130.0 cm) max. overall

³⁄₁₆

height

B. 28½" (72.4 cm) max. recessed

¹⁄₂

width

C. 48

¹³⁄₁₆

height

D. 23

" (59.1 cm) max. recessed

¹⁄₄

depth

E. 30" (76.2 cm) overall width

" (124.0 cm) recessed

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

Ref. W10351242B

7/26/12

CABINET OPENING DIMENSIONS

Page 2 of 2

27" (68.6 cm) and 30" (76.2 cm) Single Oven Undercounter (without cooktop installed above)

A. 27" (68.6 cm) min. cabinet width on 27" (68.6 cm) models

30" (76.2 cm) min. cabinet width on 30" (76.2 cm) models

B. 1¹⁄₂" (3.8 cm) min. top of cutout to underside of countertop

C. 5¹⁄₄" (13.3 cm) bottom of cutout to floor D. 25¹⁄₂ " (64.8 cm) cutout width

D. 28¹⁄₂ " (72.4 cm) cutout width

E. 28" (71.2 cm) min. cutout height

Double Ovens Installed in Cabinet

Single Ovens Installed in Cabinet

27" (68.6 cm) models

A. 27" (68.6 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 32" (81.3 cm) bottom of cutout

to floor D. 25¹⁄₂" (64.8 cm) cutout width E. 1¹⁄₂" (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 28" (71.2 cm)* recommended

cutout height

G. 24" (60.7 cm) cutout depth

30" (76.2 cm) models

A. 30" (76.2 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 32" (81.3 cm) bottom of

cutout to floor D. 28¹⁄₂" (72.4 cm) cutout width E. 1¹⁄₂" (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 28" (71.2 cm)* recommended

cutout height

G. 24" (60.7 cm) cutout depth

27" (68.6 cm) models

A. 27" (68.6 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 14³⁄₄" (37.5 cm) bottom of

cutout to floor is recommended. 4"-14³⁄₄" (10.2-37.5 cm) bottom of cutout to floor is

acceptable. D. 25¹⁄₂" (64.8 cm) cutout width E. 1¹⁄₂" (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 5 0

¹⁄₄

" (127.6 cm)*

recommended cutout height

G. 24" (60.7 cm) cutout depth

30" (76.2 cm) models

A. 30" (76.2 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 14³⁄₄" (37.5 cm) bottom of

cutout to floor is recommended. 4"-14³⁄₄" (10.2-37.5 cm) bottom

of cutout to floor is acceptable. D. 28¹⁄₂" (72.4 cm) cutout width E. 1¹⁄₂" (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 5 0

¹⁄₄

" (127.6 cm)*

recommended cutout height

G. 24" (60.7 cm) cutout depth

NOTE: The cutout height can be between 26¹⁵⁄₁₆" (68.4 cm) and 29⁷⁄₁₆" (74.8 cm) for sin

le ovens.

NOTE: The cutout height can be between 48⁷⁄₈" (124.1 cm) and 52³⁄₁₆" (132.6 cm) for double ovens.