KitchenAid KEBI140, KEBI170, KEBI171, KEBI270, KEBI241 User Manual

...
ELECTRIC BUILT-IN
SINGLE & DOUBLE OVENS
MODELS (singles):
KEt31140/141/170/171 KEBS145/146/176/177 SCO-1243/2433/1273/2733
MODELS (doubles):
KEB1240/241/270/271 KEBS245/246/276/277
INSTALLATION
INSTRUCTIONS
INSTALLER: FINAL CHECK LIST
IMPORTANT:
LEAVE THESE INSTRUCTIONS FOR USE BY LOCAL ELECTRICAL INSPECTOR
PLACEMENT OF UNIT
@ 1. Properly positioned-level, aligned and square with cabinet opening. u 2. Anchored securely to cabinet. n 3. Installation debns removed.
ELECTRICAL
n 1. Oven properly grounded. 0 2. Separate 1201240 volt or 12Oi208 volt, 60 Hr. single phase branch circuit of proper ampacity,
and protected by a time-delay fuse or circuit breaker of proper size.
c 3. All connections made in accordance with National Electrical Code, ANSliNFPA 70.latest
edition and local codes and ordinances.
OPERATIONAL
3 1.0 il 2. Knobs securely in place and rotate freely wlthout rubbing edges of control panel glass
J 3. All lights function properly.
-~ 1
L
r-7 .-J 5. Doors properly adjusted, open and close smoothly
ven racks installed and slide freely In all posrtlons.
holes.
J 4. Clock timer buzzer operates.
_
’ 6. Selector switch functions in all modes ,
7 Unless Instructed to leave for owner. remove all tags, iabels and Internal packing
materials.
8 Oven has been wiped clean to remove flnqermarks and other smudges
THANK YOU INSTALLER:
1 Complete lr~stallatlo:l Check
2. Leave all literature for customer 3 Notify dealer that ihstallatlon
LISA
IS
completed.
FDR DETAILED INSTRUCTIONS, FOLLOW METHODS DESCRIBED IN THIS FOLDER.
IMPORTANT: Read Before Installing to Save Time, Work,
assure proper performance, and owner’s warranty protection.
INSTALLATION INSTRUCTIONS
CABINET CONSTRUCTION
The oven must be enclosed by an appropriate cabinet or properly framed opening in the wall. See illustrations and tables for dimensions. b
The cabinet must have a solid bottom or two runners, 19-112 inches apart and centered within the cabinet. The bottom or runners must be able to support the weight of the unit (225 pounds for a double oven). The bottom or runners must be level, straight and flush with the cabinet cutout. The oven must be level forproper baking and once installed. the oven cannot be leveled.
Note: Clearances specified are for combustible walls and materials that have a density of 20 or more pounds per cubic foot. No evaluation of clearances has been made for installations adjacent to materials that are less than 20 pounds per cu. ft. density or to plastic tiles and sheeting.
-- ---_-
2%” MIN 1” upper
28%”
L
Junction Box
/
Furnished by lns1aller
61” MIN
SINGLE OVENS
Model No
Cabinet Damage Hazard
Do Not
block the oven vent. Blocking the vent may cause cabinet damage and poor baking performance.
-A hIIN-
KEBS245!246 SC0 2243
23
22.2
Loading...
+ 4 hidden pages