Kitchenaid KCED600GSS, KCED606GSS Specsheet

30" (76.2 cm) and 36" (91.4 cm) Electric Downdraft Cooktop

PRODUCT MODEL NUMBERS

KCED600G

ELECTRICAL REQUIREMENTS

To properly install your cooktop, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

■ A 4-wire or 3-wire, single-phase, 120-/240-volt, 60 Hz., AC-only electrical supply on a separate, 40-amp circuit breaker is

required for both 30" (76.2 cm) and 36" (91.4 cm) models. If a fused system is used, fuse both sides of the line.

■ The cooktop should be connected directly to the junction box through the ﬂexible metal conduit. The ﬂexible, armored cable

extending from the fuse box or circuit breaker box should be connected directly to the junction box.

PRODUCT DIMENSIONS

30" (76.2 cm) Cooktop - for standard and electric models 36" (91.4 cm) Cooktop - for standard and electric models

KCED606G

A. 221/16" (56.0 cm) without stainless steel trim or

221/2" (57.2 cm) or 23" (58.5 cm) with stainless

steel trim (depending on model) B. Model/serial/rating/clearance plate location C. 203/4" (52.7 cm) screw head to screw head

A. 203/4" (52.7 cm) screw head to screw head B. Model/serial/rating/clearance plate location C. 221/16" (56.0 cm) without stainless steel trim or

221/2" (57.2 cm) or 23" (58.5 cm) with stainless steel trim (depending on model)

A. 307/8" (78.4 cm) B. 123/16" (31.0 cm) C. 2813/64" (72.3 cm) D. 1423/32" (37.4 cm)

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

E. 2" (5.1 cm) recommended minimum

cabinet to motor clearance F. 1823/32" (47.6 cm) G. 321/32" (9.3 cm)

A. 365/16" (92.3 cm) B. 1119/32" (29.4 cm) C. 3411/64" (86.8 cm) D. 1423/32" (37.4 cm)

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

E. 2" (5.1 cm) recommended minimum

cabinet to motor clearance F. 1823/32" (47.6 cm) G. 321/32" (9.3 cm)

Page 1 of 2

Ref. W10848428B

01/2017

CABINET DIMENSIONS

A. 30" (76.2 cm) on 30" (76.2 cm) models

36" (91.4 cm) on 36" (91.4 cm) models B. Combustible area above countertop (shown by dashed box above) C. 30" (76.2 cm) minimum clearance between top of cooktop platform

and bottom of uncovered wood or metal cabinet (24" [61 cm]

minimum clearance if bottom of wood or metal cabinet is covered by

not less than 1/8" [0.6 cm] ﬂame retardant millboard covered with not

less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel,

0.024" [0.06 cm] aluminum, or 0.020" [0.05 cm] copper) D. 13" (33 cm) recommended upper cabinet depth E. 2" (5.1 cm) F. 211/8" (53.7 cm) G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop

within minimum horizontal clearances to cooktop

H. Junction box or outlet: 12" (30.5 cm) minimum from bottom of

countertop I. Junction box or outlet: 10" (25.4 cm) from right-hand side of cabinet J. 287/8" (73.3 cm) on 30" (76.2 cm) models

349/16" (87.8 cm) on 36" (91.4 cm) models K. 21/8" (6.4 cm) minimum distance to nearest left and right side

combustible surface above cooktop L. 11/2" (3.8 cm) minimum clearance between back wall and countertop

NOTE: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modiﬁcation, use a base cabinet with sidewalls wider than the cutout.

■ A minimum side clearance of 6" (15.2 cm) is recommended between side of cooktop and side wall for maximum ventilation

performance.

CUTOUT DIMENSIONS

A. 287/8" (73.3 cm) maximum on 30" (76.2 cm) models

349/16" (87.8 cm) maximum on 36" (91.4 cm) models

B. 211/8" (50.6 cm) maximum on both 30" (76.2 cm) and 36" (91.4 cm)

models

C. 819/32" (21.8 cm) on 30" (76.2 cm) models

157/16" (39.2 cm) on 36" (91.4 cm) models D. 619/64" (16.0 cm) on both 30" (76.2 cm) and 36" (91.4 cm) models E. 2" (5.1 cm) minimum space to front edge of cooktop F. Floor exhaust option G. 61/8" (15.6 cm) for 6" (15.2 cm) vent system

51/8" (13 cm) for 5" (12.7 cm) vent system H. 819/32" (21.8 cm) on 30" (76.2 cm) models

157/16" (39.2 cm) on 36" (91.4 cm) models I. 16" (40.6 cm) on both 30" (76.2 cm) and 36" (91.4 cm) models J. Wall exhaust option

Because Whirlpool Corporation policy includes a continuous commitment to improve our

products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

Page 2 of 2

Ref. W10848428B

01/2017