KITCHENAID KBRA22KLBT, KBRA22KLSS, KBRA22KLWH, KBRA22KMBL, KBRA22KMBT Dimension Guide

Bottom Mount Refrigerator

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

LOCATION REQUIREMENTS

KBLA22KL
KBLA22KM

KBRA22KL
KBRA22KM

Electrical: A 115 Volt, 60 Hz., AC only 15 or 20
ampere fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be provided.
Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.

Water: Connect the ice maker to a cold water
line with water pressure between 20 and 120 psi.

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

Ref. 2225033

06-29-04

To ensure proper ventilation for your refrigerator, allow 1/2 in. (1.25 cm) space at
the top and back and 3/16 in. (0.48 cm) on each side of the refrigerator for ease of
installation. When installing your refrigerator next to a fixed wall, leave 2-1/8 in.
(5.4 cm) minimum on each side (depending on your model) to allow for the door to
swing open. If your refrigerator has an ice maker, allow extra space at the back for
the water line connections.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor
in a location where the temperature will fall below 55°F (13°C).

®

69-7/8"

overall

32-1/2"

32-5/8"

including

handle

1

(5.4 cm)

2¹⁄₈"