KITCHENAID KBLS19KTMS, KBLS19KTSS, KBLS22EVMS, KBLS22EVSS, KBLS22KVSS Dimension Guide
...
PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
KBLS19KT
KBLS22EV
KBLS22KV
KBRS19KT
KBRS20EV
KBRS22EV
KBRS22KV
Electrical: A 115 Volt, 60 Hz., AC only 15- or 20amp fused, grounded electrical supply is required.
It is recommended that a separate circuit serving
only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use
an extension cord.
Water: A cold water supply with water pressure
between 35 and 120 psi (241 and 827 kPa) is
required to operate the water dispenser and ice
maker.
IMPORTANT: The pressure of the water coming
out of a reverse osmosis system going to the
water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the system needs to be a minimum of
approximately 40 to 60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10137649
4/28/10
To ensure proper ventilation for your refrigerator, allow for 1⁄2 " (1.25 cm) space on
each side and at the top. Allow at least 1" (2.54 cm) between the back of the cabinet
and the wall. If your refrigerator has an ice maker, make sure you leave extra space
at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave a 2
1
⁄2 " (6.3 cm)
minimum space on the hinge side to allow the door to swing open.
NOTE: It is recommended that you do not install the refrigerator near an oven,
radiator, or other heat source. Do not install the refrigerator in a location where the
temperature will fall below 55°F (13°C).
Model #
Depth Without
Handles “A”
Width -
Cabinet
“B”
Height -
Top of Cabinet
“C”
Height -
Overall
“D”
Depth -
With
Handles “E”
KBLS19KT
KBRS19KT
307⁄8"
(78.4 cm)
295⁄8"
(75.2 cm)
651⁄2"
(166.4 cm)
6615⁄16"
(170.0 cm)
333⁄8"
(84.8 cm)
KBLS22EV
307⁄8"
(78.4 cm)
325⁄8"
(82.9 cm)
681⁄2"
(174 cm)
6915⁄16"
(177.6 cm)
333⁄8"
(84.8 cm)
KBLS22KV
307⁄8"
(78.4 cm)
325⁄8"
(82.9 cm)
681⁄2"
(174 cm)
6915⁄16"
(177.6 cm)
333⁄8"
(84.8 cm)
KBRS20EV
267⁄8"
(68.3 cm)
355⁄8"
(90.5 cm)
681⁄2"
(174 cm)
6915⁄16"
(177.6 cm)
293⁄8"
(74.6 cm)
KBRS22EV
307⁄8"
(78.4 cm)
325⁄8"
(82.9 cm)
681⁄2"
(174 cm)
6915⁄16"
(177.6 cm)
333⁄8"
(84.8 cm)
KBRS22KV
307⁄8"
(78.4 cm)
325⁄8"
(82.9 cm)
681⁄2"
(174 cm)
6915⁄16"
(177.6 cm)
333⁄8"
(84.8 cm)
D
overall
C
top of
cabinet
B
incl.
handle
E
not incl.
handle
A
Bottom Mount Refrigerator
4
1
¹⁄₂" (1.25 cm)
2¹⁄₂" (6.3 cm)
Loading...