When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Food Processor in water or other
liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from the outlet when not in use, before putting on or taking off parts, and before
cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest
Authorized Service Facility for examination, repair, or electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by .itchenAid may cause Àre, electric
shock, or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Keep hands and utensils away from moving blades or discs while processing food to
reduce the risk of severe injury to persons or damage to the Food Processor. A scraper
may be used but must be used only when the Food Processor is not running.
11. Blades are sharp. Handle carefully.
12. To reduce the risk of injury, never place cutting blade or discs on base without
Àrst putting bowl properly in place.
13. Be certain cover is securely locked in place before operating appliance.
14. Never feed food by hand. Always use the food pusher.
SAVE THESE INSTRUCTIONS
3
FOOD PROCESSOR SAFETY
IMPORTANT SAFEGUARDS
15. Do not attempt to defeat the cover interlock mechanism.
16. This product is designed for household use only.
17. To disconnect, turn any control to “OFF,” then remove plug from wall outlet.
18. This appliance is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
19. This appliance is intended to be used in household and similar applications such as:
-staff kitchen areas in shops, ofÀces, and other working environments
-farm houses
-by clients in hotels, motels, and other residential type environments
-bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
Electrical Requirements- Plastic Models
Volts: 220-240 Volts VAC
Hertz: 50/60 Hz
NOTE: This Food Processor is equipped
with a polarized plug (one blade is wider
than the other). To reduce the risk of
electrical shock, this plug will Àt in a
polarized outlet only one way. If the plug
does not Àt fully in the outlet, reverse
the plug. If it still does not Àt, contact a
qualiÀed electrician. Do not modify the
plug in any way.
Do not use an extension cord. If the power
supply cord is too short, have a qualiÀed
electrician or serviceman install an outlet
near the appliance.
4
FOOD PROCESSOR SAFETY
Electrical Requirements- Metal Models
Do not use an extension cord. If the power
supply cord is too short, have a qualiÀed
electrician or serviceman install an outlet
near the appliance.
A short power supply cord (or detachable
power supply cord) should be used to
reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
Longer detachable power supply cords
or extension cords are available and may
be used.
If a longer detachable power supply cord or
extension cord is used:
The marked electrical rating of the cord
set or extension cord should be at least
as great as the electrical rating of the
appliance.
ENGLISH
Volts: 220-240 Volts VAC
Hertz: 50/60 Hz
NOTE: This Food Processor has a
grounded plug. To reduce the risk of
electrical shock, this plug will Àt in an outlet
only one way. If the plug does not Àt in the
outlet, contact a qualiÀed electrician. Do not
modify the plug in any way.
The cord should be arranged so that it will
not drape over the countertop or tabletop
where it can be pulled on by children or
tripped over unintentionally.
If the appliance is of the grounded type, the
extension cord should be a grounding-type
3-wire cord.
5
FOOD PROCESSOR SAFETY
Electrical Requirements for Brazil Only
Use appropriate outlet type for your
appliance plug, as shown below:
Before operating
this appliance,
make sure the
main voltage at the
installation site is
the same as indicated
on product technical
data label.
This information is also included on the
label attached to your appliance’s cord
near the plug.
Residence mains:
The mains wires must be of copper
with a minimum cross-section per ABNT
(NBR-5410).
To protect this appliance and the mains
against over loading, this appliance
must be connected to a circuit that
is protected with a thermo-magnetic
circuit breaker.
If the household circuit does not include
a circuit breaker, contact an electrician
to have one installed.
Electric outlet:
For your safety and to avoid damage to
your product, it is very important that
your product is earthed correctly.
Your appliance power cord features a
hexagon-shaped plug, 10A, per ABNT
(NBR 14136).
Your residence electrical installation
must have a suitable electric outlet for
this type of plug. If not, it is your
responsibility to have one installed
by a qualified electrician.
IMPORTANT:
If it is necessary to convert your
127V appliance to 220V, use a
1.0 KVA stabiliser.
Never plug your
appliance into
multi-plug
adapters with
another
appliance in the
same socket. Do
not use an extension cord. This type
of connection may cause electrical
overload in the mains, and can
damage the appliance and could
cause a fire. The appliance should
be plugged into its own outlet.
In case of oscillation in mains voltage,
install an automatic voltage stabiliser
with minimum rating of 1000 Watts
between the appliance and the
socket.
If the cord of this appliance is
damaged, it must be replaced.
Contact your nearest authorized
KitchenAid Customer Care Center.
6
PARTS AND FEATURES
Julienne Disc
(select models only)
Reversible
(2 mm and 4 mm)
Shredding Disc
Disc
Adapter
Work Bowl
Cover with
3-in-1 Feed
Tu b e
Slicing
Adapter
Drive
Adapter
Externally
Adjustable
Slicing Disc
Thin to Thick
3-Piece Food
Pusher
945 ml (4-Cup)
Mini-Bowl and
Mini-Blade
Stainless Steel
Multipurpose
Blade
ENGLISH
Dough Blade
3.0 L (13-Cup)
Work Bowl
Externally
Adjustable
Slicing Control
Heavy-Duty
Base
Chef’s Accessory
Case
2.4 L (10-Cup)
Chef’s Bowl (select
models only)
7
PARTS AND FEATURES
Important parts and accessories included with your new Food Processor are highlighted
below. Refer to the following pages for additional details on accessories included with your
Food Processor as well as optional accessories you can order separately (some optional
accessories included with select models).
Externally Adjustable Slicing Control
KitchenAid’s exclusive externally adjustable
slicing disc allows you to adjust slicing
thickness from thin to thick, without having
to remove the blade assembly. With the
slicing disc installed, simply slide the Slicing
Thickness Control to the desired setting - no
need to remove the cover or even turn off
the Food Processor.
Speed 1/ Speed 2/ Pulse Control
Two speeds and Pulse provide precise
control to give great results with most
any food.
Work Bowl Cover with 3-in-1 Feed Tube
One of the industry’s largest, the 3-in-1
feed tube accommodates large items – like
tomatoes, cucumbers, and potatoes – with
a minimum of sectioning or slicing.
3-Piece Food Pusher
Three pushers are nested inside of each
other. Remove the medium pusher from the
large pusher to reveal a medium-size feed
tube for continuous processing.
For continuous processing of smaller items
(like herbs, nuts, single carrots, and celery),
remove the narrow pusher and use the
narrow feed tube.
A small hole in the bottom of the narrow
pusher makes it easy to drizzle oil into
ingredients – just Àll with the desired
amount of oil or other liquid ingredient.
Heavy-Duty Base
The heavy, slip-resistant base helps
provide improved stability and reduced
vibration during tough food processing jobs.
ACCESSORIES
Included Accessories
945 ml (4-Cup) Mini-Bowl and
Mini-Blade
Mini-bowl and stainless steel mini-blade are
perfect for small chopping and mixing jobs.
2.4 L (10-Cup) Chef’s Bowl
Place the chef’s bowl inside the work bowl,
and slice or shred a food item while keeping
the work bowl clean for another ingredient.
3.0 L (13-Cup) Work Bowl
The durable, large work bowl provides
capacity for large jobs.
Externally Adjustable Slicing Disc
Disc is adjustable from approximately
1 mm (
slicing most foods.
Reversible Shredding Disc
Shredding disc is reversible to allow coarse
or Ànely shredded cheese or vegetables.
Drive Adapter
The drive adapter is used with the
appropriate adapter to connect the slicing/
shredding discs and mini-blade to the power
shaft on the base.
1
/16 inch) to 6 mm (1/4 inch) for
Disc Adapter
Adapter Àts over the drive adapter and into
the bottom of the adjustable slicing disc.
Julienne Disc
Julienne disc is great for making shoestring
potatoes or vegetables.
Slicing Adapter
Adapter Àts over the drive adapter and into
the bottom of the shredding or Julienne disc.
Stainless Steel Multipurpose Blade
Versatile blade chops, minces, blends, mixes,
and emulsiÀes in a matter of seconds.
Dough Blade
The dough blade is specially designed
for mixing and kneading yeast dough.
Chef’s Accessory Case
Stylish and durable case organizes and
protects blades, discs, and accessories.
Spatula/Cleaning Tool (not shown)
Special shape facilitates food removal from
bowls, discs, and blades.
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.