Kitchen C201-20D5 User Manual

Induction Cooker
C201-20D5
INSTRUCTION MANUAL

To avoid the risk of accidents or damage to the induction cooker, it is essential to read
these operating instructions before it is used for the first time. Please keep this manual
for later reference.

Dear Customer

Please read these operating instructions carefully. Above all, please observe the
“safety” section on the first few pages. Please retain these operating instructions for
later reference. Pass them on to any subsequent owners of the appliance.

SAFETY

The safety aspects of this appliance comply with accepted technical standards and
SAA Standards. However, as the manufacturer we also believe it is our responsibility
to familiarize you with the following safety instructions

1.Remove and safely discard any packaging material and promotional labels before
using this appliance for the first time.

2. To eliminate a choking hazard for young children, remove and safely discard the
protective cover fitted over the pins of the power plug when unpacking this appliance
for the first time.

3. Do not place the appliance near the edge of a bench top, counter or table during
operation. Ensure that the surface is level, clean and free of water and other
substances.

4. Do not place this appliance on a hot gas or electric burner, or where it could touch a
heated oven.

5. Never place combustible items on the induction cooker.

6.Always operate this appliance on a dry, stable and heat resistant surface.

7.Position the induction cooker clear of walls ,and other heat sensitive materials such
as clothes and curtains. Minimum of 200mm distance.

8.Do not use this appliance on a sink drain board.

9.Do not leave the appliance unattended when in use.

10.If the appliance is not in use for an extended period, disconnect the appliance from

the power outlet.

11. Use only cooking saucepans and pots suitable for use with an Induction Cooker.

12. Extreme caution must be used when the appliance is in use with an induction safe

cooking saucepan. Do not move the appliance during cooking or while a saucepan
remains on the Induction Cooker.

13.Do not operate the appliance in the vicinity of magnetically sensitive objects (eg

magnetic cards).

14.The outer surface will be hot when the appliance is operating and for some time

after use.

15.Do not place metallic utensils, non-compatible induction cookware, lids, knives,

forks, spoons or other metallic objects on the Induction Cooker glass plate, as these
may be heated and become hot when the appliance is switched on.

16. Do not insert sharp objects into the ventilation system.

17. To avoid overheating , do not place any aluminium foil or metal plates on the

appliance.

18. Do not touch the hot surface of the glass plate. The induction cooker does not heat

up itself during cooking, but the temperature of the cookware heats up the glass plate.

19. Do not heat any opened or unopened cans on the Induction Cooker.

20.Always switch the on/off switch to the off position, switch the appliance off at the

power outlet, then unplug the power cord and cool completely, if appliance is not in
use, before cleaning, before attempting to move the appliance, and when storing the

appliance.

Important Safeguards

Fully unwind the cord before use. To protect against electric shock, do not immerse
the cord, plug or appliance in water or any other liquid.
Do not allow the cord to hang over the edge of a table or bench, touch hot surfaces or
become knotted.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or appropriate instructions concerning the use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
It is recommended to regularly inspect the appliance. Do not use the appliance if the
power supply cord, plug or appliance becomes damaged in any way, it must be
replaced by the manufacturer or authorized service center in order to avoid any
hazard.
Any maintenance other than cleaning should be performed by professional electrician.
This appliance is for household use only. Do not use in moving vehicles or boats. Do
not use outdoors. Do not use this appliance for anything other than its intended use.
Misuse may cause injury. Do not use harsh abrasives, caustic cleaners or oven
cleaners when cleaning this appliance. The installation of a residual current device
(safety switch) is recommended to provide
Additional safety protection when using electrical appliances. It is advisable that a
safety switch with a rated residual operating current not exceeding 30mA be installed
in the electrical circuit supplying the appliance. Please contact your electrician for
professional advice.

INDUCTION COOKER WORKING PICTURE

The induction cooker works on the principle of a coil of copper wire placed
underneath the cooking pot. An alternating electric current flows through the coil,
which produces an oscillating magnetic field. This field induces an electric current in
the pot. Current flowing in the metal pot produces resistive heating which heats the
food.

SELECTING COOKWARE FOR INDUCTION COOKING

In order for the induction cooker to work the cooking vessel must be made of a
ferromagnetic metal. Some of the popular cooking vessels made of ferromagnetic
metal are: stainless steel, iron or cast iron pots, casseroles and fry-pans.
Cookware made of non-metal materials like glass, porcelain, etc. or metals without

ferromagnetic properties like aluminum are not suitable for induction cooking.

KNOW YOUR INDUCTION COOKER

OPERATING YOUR INDUCTION COOKER

BEFORE FIRST USE

Before using your induction cooker become familiar with all the parts.

1. Place the Induction Cooker on a dry, level work surface.

2. Position an induction compatible saucepan/pot in the centre of the circular design

on the crystal black plate surface, ensure liquid or food is inside the saucepan/pot.

3. Insert the power plug into a 220V-240V power outlet and switch power outlet ‘On’

ENSURE THE SAUCEPAN/POT IS POSITIONED IN THE CENTRE OF THE
CIRCULAR DESIGN ON THE CRYSTAL BLACK PLATE SURFACE.

. NEVER USE THE SAUCEPAN/POT WHEN EMPTY, ENSURE LIQUID

OR FOOD IS INSIDE THE SAUCEPAN/POT.

4. The LED screen will initially display (88:88),a sound will beep and the appliance

will be activated and start in a standby mode by flashing (----) symbol.

5. Press the power on/off button once. A beep will sound.

6. By default, the Induction Cooker will automatically set to the power level mode P

at 1600W. The induction cooker is now heating at this power level and is ready to use.

7.A fan will run continuously during the heating process.

INDUCTION COOKING CRYSTAL BLACK PLATE SURFACE IS HOT
AFTER COOKING,DO NOT TOUCH.

The Induction Cooker offers two heating options the Power level mode or the
Adjustable temperature mode. Each of these heating options can be combined with a
Timer mode. Heating options and Timer mode can be selected by simply pressing the
Menu button A beep will sound every time Menu button is pressed.

POWER LEVEL MODE

1. When power level mode is selected, a corresponding indicator light will illuminate

on the LED screen, adjacent to the power icon. A beep will sound every time Menu
button is pressed.

2. The Induction Cooker will initially be set to P to be 1600W by default. The LED

screen will show 1600W.

3. Select the desired power levels using the control dial turn dial clockwise to increase

power and anti-clockwise to decrease power. The power levels are adjustable on a
scale from P-1 minimum power to P-10 maximum power. A beep will sound each
time power level is changed.

4. The Induction Cooker will then begin heating. Be careful as temperature is reached

a lot faster than traditional cooking methods.

5. In this power level mode, it is also possible to set the cooking time with the Timer

mode. Refer to timer mode details.

6. When cooking is complete, press the power on/off button once to the standby

mode. A beep will sound. Switch ‘Off’ at the power outlet and unplug the power cord.

The power level mode can be adjusted at any time during the cooking process by
adjusting the control dial. NOTE

°C ADJUSTABLE TEMPERATURE MODE

1. When temperature mode is selected, a corresponding indicator light will illuminate

on the LED screen, adjacent to the temperature °C icon. A beep will sound every time
Menu button is pressed.

2. The Induction Cooker will initially set to 240°C by default. The LED screen will

flash 240°C.

3. Select the desired temperature using the control dial, turn dial clockwise to increase

temperature and anti-clockwise to decrease temperature. The temperature is adjustable
on a scale from 60°C to 270°C. A beep will sound each time temperature is changed.

4. The Induction Cooker will then begin heating. In this adjustable temperature °C

mode, it is also possible to set the cooking time with the timer mode. Refer to the

timer mode details.

5.When cooking is complete, press the power on/off button once to standby

mode. A beep will sound. Switch ‘off’ at the power outlet and unplug the power cord.

Temperature can be adjusted at any time during the cooking process, and the
Induction Cooker temperatures can be lowered or increased on a scale of 60°C to
270°C NOTE

TIMER MODE

1. Power level and/or Adjustable temperature mode must be selected prior to setting

the Timer mode.

2. To select the Timer mode, press the mode button once, a corresponding indicator

light will illuminate on the LED screen adjacent to the timer mode icon. A beep will
sound.

3. Select the desired Time using the Control dial. Turn dial clockwise to increase time

and anti-clockwise to decrease time. The time is adjustable on a scale from 1 minute
to 180 minutes. A beep will sound each time the timing is changed.

4. During the selection period, the LED screen will continue to flash, when the

desired time has been selected, the LED screen will cease flashing after
approximately 5 seconds and display selected time.

Turning the control dial slowly increases or decreases the timing by 1 minute
increments, allowing for accurate selection. A beep will sound each time the time is
changed. Turning the control dial very quickly clockwise increases timing by 10
minute increments, anticlockwise decreases increments by 10 minute increments in fast

motion selection. NOTE

5. The timer count down then commences and when the selected time has lapsed, a

beep will sound and the Induction Cooker will automatically switch to stand-by mode.
The Timer mode does not need to be set to use the Power level mode or Adjustable
temperature mode. To readjust power level and temperature during cooking with timer
mode, the function of a pre-set timer will be cancelled.

CLEANING ,MAINTENANCE AND STORAGE

BEFORE ATTEMPTING ANY CLEANING - FIRST ENSURE THAT THE PLUG
IS REMOVED FROM THE MAINS SOCKET. DO NOT IMMERSE THIS
APPLIANCE IN WATER. DO NOT USE HARSH ABRASIVE CLEANSERS.
All the surfaces may be cleaned simply by wiping over with a soft, damp cloth. For
hard stains, we recommend using a non-scratch cream cleanser.
Use a soft brush to clean the air inlet and outlet. Do not use any sharp objects to clean
the outets in order to avoid electric shock or damaging the appliance.

DO NOT IMMERSE THE INDUCTION COOKER OR POWER CORD AND

POWER PLUG IN WATER OR ANY OTHER LIQUID.

TO PREVENT DAMAGE TO THE APPLIANCE DO NOT USE ALKALINE
CLEANING AGENTS WHEN CLEANING, USE A SOFT CLOTH AND MILD
DETERGENT.

STORAGE

Before storage, press the power on/off button once. A beep will sound. Switch off
at the power outlet and unplug power cord from the power outlet. Ensure the
appliance is completely cooled, clean and dry. Store the appliance flat on the bench or
in a convenient cupboard. Do not place anything on top of the appliance during

storage.

TROUBLESHOOTING GUIDE

Malfunctions

Alarming

condition

Features Recovering

Recover

state

CODE

Reminder to

put pot

NO Pot Buzzer sounds

every 4 seconds,

the screen shows

“E0”

Put an

appropriate pot

OFF/Work EO

High

temperature of

IGBT

Radiator
of IGBT

reaches

105°C

The induction

cooker stop

heating

IGBT start

heating when

temperature

lower than 80°C

Back to the

working

state

High voltage Voltage is

over 275V

Buzzer sounds

every 4 seconds,

the screen shows

E2,

Voltage recover

to normal

OFF/Back to

the original
state before

malfunction

E2

Low voltage Voltage is

lower than

88V

Buzzer sounds

every 4 seconds,

the screen show

E1

Voltage recover

to normal

OFF/Back to

the original
state before

malfunction

E1

IGBT sensor

being off

current

∞ or 0 Buzzer sounds

every 4 seconds,

and the screen

shows E4,

Power OFF and

recover from

abnormal

situation

OFF E4

The Panel’s

sensor of the

induction

cooker being

off current

∞ or 0 Buzzer sounds

every 4 seconds,

and the screen

shows E3,

Power OFF and

recover from

abnormal

situation

OFF E3

High

temperature of

the panel or

dry burn

The

temperatur

e of

surface is

higher set

range

Buzzer sounds

every 4 seconds,

and the screen

shows E5

The temperature

of induction

cooker is lower

than 300°C

OFF E5

TECHNICAL SPECIFICATION

Model: C201-20D5
Cooking technology: Induction
Firepower: 2000W MAX
Power: 220-230V, ~50Hz, 2000W