Kisai Satellite-X Instruction Manual

Change the way you think about time

INSTRUCTION MANUAL

Button A

Button B

1. How to read the time

• Press button A to display the time.

• All LEDs will light up and the time will be shown.

• The current time is indicated by the blinking LEDs.

• The time display will turn off after 7 seconds.

Examples

Hours Ring 1-12

PM / Charging Indicator

12:06 10:17

Minutes Ring
Groups of 5

5, 10, 15, 20, etc

Single Minutes Ring
1-4

• The hour LEDs will flash when you are in hour setting

mode.

• Press button A to increase the hours as required.

• The PM indicator will flash to indicate PM mode.

• Press button B to confirm and move to the minutes.

• The minute LEDs will flash when you are in minute
setting mode.

• Press button A to increase the minutes as required.

• Press button B to confirm and move to the animation.

This watch has a light-up animation feature. The LEDs
will animate once every 15 minutes between 6pm and
12am.

• In setting mode, when the animation feature is on,
the LEDs will animate.

• In setting mode, when the animation feature is off,
all LEDs will flash.

• Press button A to turn the animation on or off.

• Press button B to confirm and when the LEDs go out,
setting is complete.

*Note after 7 seconds of inactivity setting mode will
deactivate*

I. Setting the hour

II.Setting the minutes

III.Setting the animation

12 o’clock light is flashing
5 minute light is flashing
1 minute light is flashing

10 o’clock light is flashing
15 minute light is flashing
2 minute lights are flashing

2. How to set the time and animation

• Press and hold button B for 3 seconds to enter setting

mode.
*Note after 7 seconds of inactivity setting mode will

deactivate*

PM / Charging Indicator

PM / Charging Indicator

• This watch is covered by a 1 year warranty. This warranty

does not cover water damage, accidental damage, neglect

or unauthorized repair.

II. Warranty

• This watch uses a PL301517 rechargable watch battery.

• The battery should last about 1 month between charges.

• The battery lifetime is expected to be 300 charges.

• Only use the cable provided with the watch for recharging,
as it is designed specifically for this watch.

7. User information

I. Battery

III. Caution

3. How to recharge the battery 4. Items included in the box

• To recharge the battery, connect the USB charging cable
provided to the watch USB port and then to a power source,
e.g. your computer.

• To open the watch USB port, use the screw driver included.

• When charging, the charging indicator will flash.

• When the charging indicator stops flashing, the watch is
90% charged.

• It is advised that you continue to charge the watch for a full

3.5 hours to ensure the battery is 100% charged.

Case Materials

Case Dimensions

Maximum Fit
Wrist Size

Display

Strap Materials

Finish

Weight

Battery

Water Resistance

Stainless Steel

Silicone

29mm x 50mm x 11.5mm

210mm (approx.)

LED Digital Tube

Brushed / Polished

70g

PL301517

3ATM

SPECIFICATIONS

Included in the box

• Watch

• USB cable

• Screw driver

• Spare USB cap

• Watch manual

• This watch is water resistant to 3ATM. Please do not use

the watch in the shower, for swimming or for other water
　related activities.