Change the way you think about time
INSTRUCTION MANUAL
Button A
Button B
This watch uses an LCD “always on” display to show the time.
It uses an accelerometer which changes the display from
“cryptic mode” (see example 1) to “easy mode” (see example
2) when you turn the watch towards you to view the time.
Example 1:
12:47
cryptic mode
Time checking position
Example 2:
12:47
easy display mode
1. How to read the time
6h
6h
12h
12h
6h
6h
12h
12h
•
•
The time is displayed digitally, hours in the upper half of the
screen, minutes in the lower half of the screen.
The digits for “cryptic time” and “easy time” are shown below.
Time examples:
cryptic mode:
hours
minutes
time mode indicator
PM indicator
regular mode:
1 2 64 83 75 9 0
time: 12:47 PM
time: 06:35 AM time: 04:19 PM time: 10:08 AM
•
•
button B
date
month
Example 2:
february 9th
Example 3:
june 1st
Example 1:
May 23rd
date indicator
You can illuminate the display for a short time with the
EL backlight by pressing button A.
This function works best at night time
.
Press button B to display the date. The date icon indicates
that you are in date mode.
The date is displayed in the same way as the time, with
the month in the upper half of the screen and the date in
the lower half of the screen.
•The display will change back to time mode after a short time.
I. Turning on the backlight
II. How to read the date
2. Operating the basic functions
•
•
•
•
button B
minutes
AM indicator
hours
Example 3:
06:15 AM
alarm off
Example 4:
03:45 PM
alarm on
Example 1:
07:30 AM alarm off
Example 2:
07:30 AM alarm on
alarm indicator
(alarm off)
alarm indicator
(alarm on)
Press button B twice to display the alarm time.
The alarm mode icon indicates that you are in alarm mode.
The alarm on/off icon indicates that the alarm is either on
or off.
The display will change back to time mode after a short time.
III. How to check the alarm time
•
The time icon and hour digits will flash when you are in
hour setting mode.
The AM/PM icon in setting mode indicates that you are
setting the time in AM or PM.
Press button B to increase the hours as required.
Hold button B to increase the hours more quickly.
Press and hold button A for 3 seconds to enter setting
mode.
Note: after 7 seconds of inactivity setting mode will desactivate.
The time icon and the minute digits will be flash when you
are in minute setting mode.
Press button B to increase the minutes as required.
Hold button B to increase the minutes more quickly.
hours blinking
time indicator
blinking
Example:
05:17 PM
hours setting
3. How to set the time and animation
I. Setting the hour
II. Setting the minutes
press button A to
confirm and move
to minutes.
Note: after 7 seconds
of inactivity setting
mode will deactivate.
•
•
•
•
•
•
•
•
•
This watch has an animation feature. When set, the
animation will appear every two seconds and shows a
segment falling from one randomly selected line.
In setting mode, when the animation is on, the line on the
left of the display will animate.
In setting mode, when the animation is off, all the lines
will flash.
Press button B to turn the animation on or off.
Press button A to confirm and exit setting mode.
minutes blinking
“falling
segment”
“falling
segment”
time indicator
blinking
Example:
05:19 PM
minutes setting
Example 1:
time display
animation on
Example 2:
setting mode
animation on
III. Setting animation
Press button A to
confirm and move
to the animation.
Note: after 7 seconds
of inactivity setting
mode will deactivate.
•
•
•
•
•
Press button B to display the date.
Press and hold button A for 3 seconds to enter date
setting mode.
Note: after 7 seconds of inactivity setting mode will deactivate.
4. How to set the date
I. Setting the year
I. Setting the month
The date icon and the year digits will flash when you are
in setting mode.
Press button B to increase the year as required.
Hold button B to increase the years more quickly.
The date icon and the month digits will flash when you are
in month setting mode.
Press button B to increase the month as required.
Hold button B to increase the month more quickly.
years blinking
date indicator
blinking
Example :
2012
years setting
Press button A to
confirm and move
to month.
Note: after 7 seconds
of inactivity setting
mode will deactivate.
•
•
•
•
•
•
•
•
•
The date icon and the date digits will flash when you are
in date setting mode.
Press button B to increase the date as required.
Hold button B to increase the date more quickly.
months blinking
date blinking
date indicator
blinking
date indicator
blinking
Example :
November the 1st
month setting
Example :
12th
date setting
III. Setting the date
Press button A to
confirm and move
to date.
Note: after 7 seconds
of inactivity setting
mode will deactivate.
Press button A to
confirm and exit
setting mode.
Note: after 7 seconds
of inactivity setting
mode will deactivate.
•
•
•
•
•
Press button B twice to display the alarm time.
Hold button A for 3 seconds to enter alarm setting mode.
Note: after 7 seconds of inactivity setting mode will deactivate.
The alarm mode icon will start flash.
Press button B to turn the alarm on or off. The alarm icon
indicates that the alarm is on.
Note: after 7 seconds of inactivity setting mode will deactivate.
Press button A to confirm and move to the hours.
alarm indicator
blinking
alarm on
indicator
Example 2: alarm off
alarm on/off setting
Example 1: alarm on
alarm on/off setting
5. How to set the alarm time
I. Turning the alarm on or off
•
•
•
•
•
III. Setting the alarm minutes
The alarm icon and the hour digits will flash.
The AM / PM icon in setting mode indicates that you are
setting the time in AM or PM.
Press button B to increase the hour as required.
Hold button B to increase the hour more quickly.
The alarm icon and the minute digits will flash.
Press button B to increase the minutes as required.
Hold button B to increase the minutes more quickly.
hours blinking
hours blinking
time indicator
blinking
time indicator
blinking
Example: 06:50
alarm hours
setting
Example: 06:55
alarm minutes
setting
II. Setting the alarm hour
press button A to
confirm and move to
alarm minutes.
Note: after 7 seconds of
inactivity setting mode
will desactivate.
Press button A to
confirm and exit
setting mode.
Note: after 7 seconds
of inactivity setting
mode will desactivate.
•
•
•
•
•
•
•
•
•
This watch is covered by a 1 year warranty. This warranty
does not cover water damage, accidental damage, neglect
or unauthorized repair.
II. Warranty
This watch uses a CR2032 replaceable watch battery.
Battery lifetime will vary depending on use, but is
estimated to last for at least one year.
To maximize battery life you should limit use of the EL
backlight.
8. User information
I. Battery
III. Caution
•
•
•
•
• This watch has limited resistance to water. Please do not
use the watch in the shower, for swimming or for other
water related activities.
Case Materials
Case Dimensions
Maximum Fit
Wrist Size
Display
Strap Materials
Finish
Weight
Battery
Wood
Wood
35mm x 55mm x 13mm
210mm (approx.)
LCD with EL backlight
Clear Coating
78g
CR2032
SPECIFICATIONS
Loading...