INSTRUCTION SHEET
a
c
j
d
e
b
f
g
h
i
AG-2
a ODI Grip Handle
b Quick Release
c Base Plate
d (2) 1⁄4 – 20 x 3⁄4
Stainless Steel Screws
e (1) 1⁄4 – 20 x 5⁄8
Stainless Steel Screw
f (2) 10 – 32 x 5⁄16
Stainless Steel Screws
g 1⁄8" Allen Wrench
h 5⁄32" Allen Wrench
i Arm Bracket
j Loctite®
STEP 1
1. Determine the orientation of
the QUICK RELEASE TIGHTENING
KNOB. It can be mounted either
direction.
STEP 2
2. Apply LOCTITE® to the
1
(2)
⁄4 – 20 X 3⁄4 FLAT HEAD
ALLEN SCREWS, insert into the
bottom of the base and tighten.
STEP 3
3. Attach ARM BRACKET (i) to the
bottom of the BASE PLATE (c) with
(2) 10 – 32 x
SCREWS (f) and tighten with
supplied
STEP 4 STEP 5
5
⁄16" STAINLESS STEEL
1
⁄8"ALLEN WRENCH (g)
www.kirkphoto.com
800.626.5074 • 260.665.3670
333 Hoosier Drive,
Angola, IN 46703-9336
4. Determine the position of the handle,
top or bottom mount.
5. Insert
1
⁄4 – 20 X 5⁄8 FLAT HEAD SCREW
and tighten. Do not use Loctite®.