Kirisun Communication PT620001 Users Manual
Read frequency: flashes red; Write frequency:
Flashes orange after transmission.
(Once pe
r
3.5 Installing the Optional Speaker/
Programmable function button: Press it to activate the programm
-
Microphone
Insert the
Speaker/Microphone plug into
the jacks of
the versatile connector, and
fix it with the supplied snail
screw.
Notes:
1) Only use the KIRISUN
Speaker/ Microphone.
2) KME-62A Speaker/Microphone is
supplied for option.
3) The Speaker/Microphone is
for option only. If you
want to purchase one,
please contact the local
KIRISUN dealer.
4 GETTING ACQUAINTED
4.1 Transceiver Overview
1
1 Antenna
2 LED
Indicator
2
5
6
7
3
4
9
Transmitting
Lights red
Receiving Lights green when Carrier wave is present
Scanning Flashes green. (Once per second.)
Read/Write frequency
flashes green.
Transmit code (DTMF
/2-Tone/5-Tone)
Decode (DTMF/KDC
1200/2-Tone/5-Tone)
second.)
Flashes orange within the effective time
after receiving the correct code.
Low battery warming Flashes red. (Once per second.)
Alerts once every 30 seconds.
Wireless clone
Turn on the transceiver with PTT and side
button 2 pressed, and lights orange.
While in cloning the host transceiver flashes
Red and the sub one lights green.
3 Channel Selector
Rotate to select channel 1-16.
4 Power/Volume Switch
8
Turn clockwise to switch on the transceiver.
Turn counterclockwise till a click is heard to switch off the
transceiver.
Rotate to adjust the volume after turning on the transceiver.
5 Side Button 1
7 8
6 PTT (Push-to-talk)
To make a call, press and hold the PTT button, then speak into
the microphone with normal voice.
Release the PTT button to receive.
7 Side Button 2
Programmable function button: Press it to activate the programmable auxiliary function. Its default setting is squelch off
Momentary.
8 Emergency Button
Press and hold it longer than the preset time to activate
emergency alert function.
9 Microphone/Speaker Jacks
For connecting external Microphone/Speaker.
4.2 Programmable Auxiliary Functions
The dealer can program the Side Button 1 and Side Button 2
as one of the following auxiliary functions.
None (No Function)
Key Lock
Key Lock with Backup
Monitor
Monitor Momentary
Scan
Scan + Temporarily Delete
Squelch Off
Squelch Momentary
Temporarily Delete
CALL 1
CALL 2
Scrambler
5 Basic Operati on
Switch On
Switch on the transceiver by turning the Power/Volume switch
clockwise till a click is heard, then the transceiver will be in
the state of stand by and you will hear a beep if the dealer
has set it. If voice annunciation has been set, the
current channel number will sound.
Turn the Power/Volume switch counterclockwise to switch off
the transceiver.
Adjust Volume
Rotate the Power/Volume switch to adjust volume.
Turn clockwise to increase the volume and counterclockwise
to decrease the volume.
Note: If the dealer has set the function of the side buttons as
Squelch Off or Squelch Off Momentary , press
the side button to listen to the background noise and rotate
Power/Volume switch to adjust volume.
Select a Channel
Rotate the channel selector to select a channel. Clockwise to
increase the channel number; counterclockwise to decrease.
If voice annunciation has been set, the current
channel number will sound.
Note: If a channel has not been opened by programming you
the
cannot use it. If you selected a channel not opened LED will
be
canceled
e
lights red and flashes green, and warning tone sounds.
Make a Call
To make a call, press PTT, and speak in normal
voice and pleas e keep your mouth 1~2 inches
away from the microphone to get the best voice quality.
Release the PTT button to receive a call.
Receive a Call
Your dealer can set CTCSS, DCS, DTMF, KDC1200, 2-Tone
and 5- Tone signaling on your radio channels by PC software.
If you select a channel that has been preset with
the tone signaling, you will not hear any other calls except
those from your own system.
If the channel you select hasn't been in any of these signaling
types, you can hear any call (not limit to the members in your
system.)
6 Advanced Operations
6.1 Key Lock (Backup)
1) Press and hold the side button set as key lock for 1 second
to activate or inactivate key lock. When Key Lock is active, the
following keys are locked:
Channel Selector, Scan Button, Scan + Temporarily
Delete
Button, Temporarily Delete Button and Scrambler button.
2) If the side button has been set as Backup, Key
Lock will remain active even after the transceiver is turned
on again. If Backup function has not been set, Key Lock will
after turning on the transceiver again.
6.2 Monitor/ Squelch Off
Monitor, Monitor Momentary, Squelch Off, and
Squelch Off Momentary functions can enable you to
listen to the signals unable be heard while in normal
operations, or can be used to adjust the selected channel's
volume.
Monitor: Press the monitor button once to inactivate CTCSS,
DCS, DTMF, KDC1200, 2-Tone and 5- Tone signaling,
and press it again to return to normal operation.
Monitor Momentary: Press and hold the monitor
button to inactivate CTCSS, DCS, DTMF, KDC1200,
2-Tone and 5- Tone signaling, and release it to return to
normal operation. Squelch Off : Press the button once to
listen to background noise, and press it again to return to
normal operation.
Squelch Off Momentary : Press and hold the button to listen
to background noise, and release it to return
to normal operation.
6.3 Scan
While in scanning, the transceiver checks every channel and
stops on the channel on which a signal is detected until that
signa l disappears. If the delay tim
between signal disappearing and continuing scanning
has been preset, the transceiver will remain on that
channel in the delay time if a signals received .
Only when there are two channels added in the scan list and
11 12
the scan function has been activated, the transceiver can start
Note:
,
6.6 VOX
scanning.
1) Press the button set as Scan or Scan + Temporarily
Delete to start scanning.
2) The transceiver will start scanning from the
current channel and scan channels one by one in the
consequence of channel No. and the LED flashes green.
3) When a signal is detected on a channel ,
scanning pauses and LED lights green.
4) You can select a channel to make a call by pressing
the
PTT button during anytime of scanning.
5) Press again the button set as Scan or
Scan + Temporarily Delete to end scanning.
Priority Scan
During scanning, if the priority channel has been set
on the transceiver, when the priority channel receives
a signal the transceiver will automatically switch to
the priority channel even the normal channel is receiving
signals at that time. And the transceiver will stay on the
priority channel till that signal disappears. The dealer can set
the delay time between signal disappearing and continuing
scanning.
Temporarily Delete
When scanning pauses on a channel, press and
hold the button programmed as
Temporarily Delete or Scan
+ Temporarily Delete for 1 second to delete
this channel temporarily from the scanning list.
of scanning channels is less than 2, you cannot
delete any channel, either.
After exiting scanning mode and entering it
again, the temporarily deleted channel will be added in the
scanning list again.
6.4 CALL 1/CALL 2
If the dealer has programmed DTMF, KDC1200, 2Tone or
5Tone signaling on the current channel
pres s the programmable side button (CALL 1 or
CALL 2) to send the stored DTMF, KDC1200, 2- Tone or
5-Tone code.
While in transmitting LED lights red; and after
transmission except KDC1200 LED flashes orange till
the effective time expire, within which you can
receive calls from other transceivers.
6.5 Scrambler (Backup)
Scrambler offers voice security. This function set
on both communication parties can avoid other transceivers
using the same frequency to acquire your private information.
When pressing the side button programmed as
Scrambler, the third party is unable to listen to your talking
voice clearly.
If Scrambler Backup option is not activated, the
transceiver will not be in Scrambler state after it is
switched on once again, whereas the Scrambler state will
be stored.
Loading...