Kirisun PT6800 Datasheet

S

tandard accessories

PT6800

The standard accessories supplied for the radio have a
variety of specification options adaptable to different countries
and regions.

KTC-21(UK)

Switching power

KBC-36C

Desktop charger

Antenna

KTC-23(EU)

Switching power

KB-36C

1700mAh

Li-poly

Battery pack

KBJ-04

Belt Clip

KTC-25(US)

Switching power

KGS-01

Hand strap

KTC-26(AU)

Switching power

Optional Accessories:

SPECIFICATIONS

General

Frenquency Range
Channel Capacity

Channel Spacing
Frenquency Stability
operating temperature
Operating voltage
Dimension(H W D)
Weight
Battery

Transmitter

RF Power
Frenquency modulation
Antenna Impedance
Modulation Limiting

Modulation Distortion
Radiated Spurious Emission
FM Noise
Adjacent Channel Power

Receiver

Reference Sensitivity
Operating Bandwidth
First IF of Receiver
Second IF of Receiver
Adjacent channel Selectivity
Intermodulation Rejection
Spurious Response Rejection
Rated Audio Power
Rated Audio Distortion
FM Hum&Noise

0.28 V@12.5KHz 0.25 V@20/25KHz typical

136~174MHz 400~470MHz

350~390MHz

12.5KHz/20KHz/25KHz

56mm 120mm 35mm

4W/1W(UHF) 5W/1W(VHF)

2.5KHz@12.5KHz, 4KHz@25KHz

-36dBm < 1GHz /-30dBm > 1GHz

-40dB @ 25KHz/-35dB @ 12.5KHz

-60dB @ 12.5KHz/-70dB @20/ 25KHz

60dB @ 12.5KHz 70dB @ 20/25KHz

128

2.5ppm

-25 ~ + 55

7.5V DC 20%
310g

1700mAh li-poly

16K F3E/11K F3E

50

5KHz@25KHz

< 5%

W7 N3.5

51.65
450

65 dB
70 dB

1W
5%

40/35

PT6800PT6800PT6800

Trunked P ortable R adio

KB-70A

Li-poly 1300mAh

Battery pack

KSPL-03

Programming cable

KB-36D

Car power supply

KPT-12

Leather Case

KME-68D

Earpiece-Mic

KBC-06A4

6-slot universal

charger

KME-68B

Earpiece-Mic

KME-68A

Speaker-Mic

NOTICE: The specifications may be subject to change without notice
due to advancement in technology, for more detailed information,
please contact KIRISUN Electronics [Shenzhen] Co., Ltd.

For more information , please contact:

Built-in Conventional & MPT Trunking Mode
Enhanced MPT Trunking Functions
Multiple System Parameters
Full Dot-matrix Display and Keypad
Customizable Function Menu
Power-on/Read/Program Password

2.5/5/6.25 kHz PLL Steps
Various Call Features
Longer Working Hours
Durable & Rugged Design

KIRISUN Your smart choice

PT6800

Trunked P ortable R adio

ADVANTAGES

Multiple modes

Conventional and MPT Trunking features are built-in.
Operating modes are selectable by preprogrammed short­cut keys. Talk Around feature could be programmed as
automatically start once there is no signal for MPT trunking
system.

Upgradeable Software

Flash memory enables future system upgrades.

6 System Settings

Up to 6 system settings with different personalities, such as
contacts, conventional channels, control channels, MPT
talking channel schemes and so on, offer great roaming
possibilities to the PT-6800.

32 Conventional Channels with Alias
64 MPT Control Channels with Priority
20 MPT Turnking Channel Schemes
Full Dot-matrix Display

32*128 LCD with full dot-matrix and 11 icons offers more
convenience in operation on the utilities menu. Message
and status of the radio could be read easily, such as the
signal strength and battery capacity.

Password protection

The reading and programming on radio data, and the
power-on of the radio could be protected by password to
ensure the security and prevent data reveal.

Audio Compander

The built-in audio compander could be switched on or off
for each channel to reduces noise and provides clear
reception.

MIL Grade Durability

The rugged construction designed to meet MIL STD 810
C/D/E/F allows the radio to be used in harsh environment
and could be took rough treatment

Optional large capacity battery and Longer Working Hours

The optional 1750 mAh Li-poly battery and low standby current
in MPT trunking mode enables longer stand-by and working
time.

Multiple PLL Steps

2.5 kHz, 5 kHz and 6.25 kHz could be used for MPT trunking
and conventional channel frequency assignment for greater
efficiency in frequency resources.

CTCSS/DCS Encoder/Decoder

Built-in CTCSS/DCS Encoder/Decoder can prevent co-channel
interference and unwanted conversations on the same
frequency and ensure smooth communication in both
conventional and MPT trunking mode.

High/Low Power Switch

The TX power could be programmed as high or low per channel.
And it could be switched in MPT trunking mode by function
menu.

Keypad/LCD Back-lit Switch

The backlit of LCD and keypad could be switched on or off for
night time operations or less power consumption.

Scan and DTMF dialing in conventional mode
Busy Channel Lockout (BCLO)

BCLO is used to prevent the interference with the on-going
conversation. If BCLO is on, the radio will be remaining in
receiving status even with PTT pressed to avoid interfering with
others on conversation.

Time-out Timer (TOT)

When TOT is on and the transmission exceeds the preset time
limit, the radio will stop after warning tone. TOT can prevent the
radio from any potential damage caused by overlong
transmission.

Rapid Log-on Search & Background Search

Multi-scanning in different setting helps the radio search out
the base station quickly. The radio could as well log-on the
base station with strongest signal at any time. PT-6800 could
even switch to different system manually according to preset
64 system code with alias.

Customizable Function Menu

The function menu used for settings on most functions could be
customized by programming software according to different
authorization.

Contact List & Home Address

The radio could save up to 200 contacts in the contact list for
quickly dial and Caller ID service. And home address feature
allows one-key dial-out while stand-by.

Programmable Short-cuts

Up to 9 programmable short-cuts offers easy-to-access on
most daily use functions.

One-key Emergency Call

Orange emergency button on top of the radio enables
prompt call for help under critical circumstances.

Remote Kill/Activate

If the radio is killed, all attempts on operation by user,
except power on/off, will be ignored. The radio will be
activated only when it received the correct instruction from
MPT trunking control center.

Dynamic Grouping

For temporarily communication among radios from different
groups, the base station could quickly group those radios as
a new team by sending a remote instruction.

Short Data Message

32 short data messages enable more convenience in daily
use. Message with up to 100 characters could be read from
large LCD.

Call List

Up to 10 last dialed numbers could be saved even in power
failure for redialing. And there are also 10 phone number
could be preprogrammed for quick dialing.

Versatile Calls

With support of the MPT trunking
system, PT-6800 could realize short
data message call, individual/group
call, broadcasting call, priority call,
PABX/PSTN call etc.

Call Restriction

To increase the conversation
efficiency among group, the radio
could be programmed to call
authorized units or groups only. The
radio could be set as non-disturb
status or to transfer all incoming call
to assigned unit for special
conditions.

KIRISUN Your smart choice