Kirisun PT6500 User Manual
INSTRUCTION MANUAL
PT6500
FM HANDHELD TRANSCEIVER
NOTE
INSTRUCTION MANUAL
PT6500
FM HANDHELD TRANSCEIVER
We are very grateful for your purchasing brand twoway radios produced by Kirisun Electronics (Shenzhen) Co.,
Ltd.
We believe two-way radio, which always incorporates
the latest technology, can bring great convenience to your life
and work;
We also believe that the quality and function of twoway radio can meet your demands for reliable communication.
PRECAUTIONS
Please observe the following precautions to prevent fire,
personal injury, and radio damage.
Do not operate your radio while taking on fuel, or being
charged.
Do not expose the radio for a long period to direct sunlight,
nor place the radio close to heating appliances.
Do not place the radio in excessively dusty areas, humid
29
areas or on unstable surfaces.
Do not modify this radio for any reason.
Refer service to qualified licensed or certificated technicians
only.
Notice to the User:
Government laws prohibit radio communication without
permission in government districts.
Illegal operation is subject to punishment by fine and/or
imprisonment.
Refer service to the well-trained professional technicians only.
Safety
It is important that the user is aware of and understands hazards
common to the operation of any radios.
Warning!
Turn off your radio before entering any area with a potentially
explosive atmosphere (where the air contains gas, dust and
smog, etc.), such as while taking on fuel, or while parking at a
gasoline service station.
Precautions in Use
Please comply with the following attentions to avoid fire, bodily
injury and damage to the radio.
The radio is recommended to transmit for 1 minute and
receive for 4 minutes. Long time transmitting or continuous working in
high power mode will make the rear side of the radio generate heat.
Please don't disassemble or assemble the radio under any
circumstances.
Please don't expose the radio to direct sunlight for a long time;
don't place the radio near any heating devices, either.
Please don't put the radio in extremely dusty, moist or dabbling
places; don't place it on any unstable surfaces, either.
If the radio emits smoke or strange odors, turn it off and remove
the battery from the radio and promptly contact your local authorized
Kirisun dealer.
V071123
CONTENTS
Unpacking and checking..............................................................1
Supplied accessories ..................................................................1
Preparation...................................................................................2
Charging the battery..................................................................2
Installing/Removing the battery pack.........................................3
Installing the antenna.................................................................4
Installing the optional speaker/microphone...............................4
Installing the belt clip.................................................................4
Radio Overview............................................................................5
Basic Operation............................................................................7
Programmable Button functions.................................................14
VOX............................................................................................22
Whole setting..............................................................................22
Time-out Timer TOT ...........................................................22
Battery Saving..........................................................................23
Low Power Warning.................................................................23
Channel Annunciation..............................................................24
CTCSS/ DCS User's resolution................................................24
Busy Channel Lockout BCL ................................................24
Receiving Squelch Mode.........................................................24
DTMF signaling .......................................................................25
2TONE signaling .....................................................................25
5TONE signaling .....................................................................26
Transmit beginning/ending signaling (PTT ID) ........................26
Problems and troubleshooting .................................................27
Major Specifications...................................................................28
Status setting..............................................................................29
UNPACKING AND CHECKING EQUIPMENT
Carefully unpack the radio. We recommend that you
identify the items listed in the following table before discarding the
packing material. If any damage has occurred during shipment,
please contact the dealer immediately .
SUPPLIED ACCESSORIES
ITEM QUANTITY
Antenna
Power adapter
Belt clip
Charger
Hand strap
Li-Polymer battery
Instruction manual
1
1
1
1
1
1
1
PREPARATION
CHARGING THE BATTERY PACK
Plug the power adapter into the proper AC wall
outlet; and insert the cable of the power adapter
into the adapter socket on the charger; then the
charger indicator lights green.
Insert the battery or the radio to be charged into
the charger slot.
Make sure the battery is in good contact with the
charger terminals. When the red indicator lights,
the charger begins to charge the battery.
After charging for about 5 hours, the red
indicator turns dim and the green indicator lights
indicating the battery has been fully charged.
Leave the battery in that sate of green indicator for 1~2 hours
before you remove it from the charger to achieve the best
performance of the battery. Then you can disconnect the power
adapter from the AC outlet.
Antenna
Charger
Power adapter
Belt clip
Battery
Hand strap
Notes:
* The battery is not fully charged in the factory. Before the initial use,
please charge the new battery.
* The KB-36A Ni-MH battery/KB-36C Li-Ploy battery of Kirisun is
adaptable with this radio.
* When you charge the battery the first time or after long time storage
21
(2 months), several times of charging is needed. Make sure the
battery is charged at least once every three months.
* Do not charge the battery again if it is charged fully or not in the lowpressure warning mode, otherwise, it will have bad effects on its life
and performance. Remove the battery from the charger after charging.
* When you use the KB-36A battery, and the transceiver is in the lowpower warning mode, recharge the battery before use. Do not start up
by force; otherwise, it will have bad effects on its life and performance.
* There is a protection circuit in KB-36C battery, so the power will be
cut off at too low power.
INSTALLING /REMOVING THE BATTERY PACK
INSTALLING THE ANTENNA
Screw the antenna into the connector at
the top of the transceiver by holding the
Button of the antenna and turn it
clockwise until secure.
INSTALLING THE OPTIONAL
SPEAKER/ MICROPHONE
Installing the Battery Pack
Match the 3 bulges of the battery pack with the
corresponding slots at the rear bottom of the radio.
Installing the Battery Pack
Then firmly press the battery pack downwards to
lock it in place until a click is heard.
Removing the Battery Pack
To remove the battery pack, use your thumb to
press the belt clip, one side of your index finger to
press the release button and then pull the battery
away from the radio.
Notes:
Do not cause short-circuit or throw the battery to the fire.
*
Do not disassemble the battery by yourself.
*
3
Insert the speaker/microphone plug into
the jacks of the versatile connector.
INSTALLING THE BELT CLIP
Match the grooves of the belt clip with
those on the rear of the battery. Then
press belt clip downwards to lock it in
place. Push the card by inserting your
nail or tool into the groove at the upper
part of the clip to remove the belt clip.
4
Loading...