Page 1
I
NSTRUCTION MANUA
L
P T 6 2 0 0
FM H ANDHELD T RANSCEIVER
Page 2
NOTE
I
NSTRUCTION MANUA
L
P T 6 2 0 0
FM H ANDHELD T RANSCEIVER
We are very grateful for your purchasing
brand
transceivers
produced
by
Kirisun
Electronics
(Shenzhen) Co., Ltd.
We
believe
transceiver,
which
always
incor- porates the latest technology, can bring great
convenience to your life and work; we also believe that
the quality and function of
transceiver can meet your
demands for reliable c ommunication.
NOTICE TO THE USER:
Government laws prohibit radio communication without
permission in government districts.
Illegal operation is punishable by fine and/or imprison-
ment.
Refer service to the well-trained professional
techni- cians only.
Page 3
Page 4
6.8
Emergency
Alert 16
7 Auxiliary
Functions
17
7.1 Time-out Timer
(T
OT) 17
7.2 Battery Saving 17
7.3 Low Battery Warning 18
7.4 Voice Annunciation of Channel Number 18
7.5 Busy Channel Lockout (BCL) 18
7.6 Clear Tail Tone 19
7.7 Remote Kill 19
7.8 CTCSS/ DCS 19
7.9 DTMF 20
7.10 KDC 1200 21
7.11 2-Tone 21
7.12 5-Tone 22
7.13 Transmitting Beginning/ Ending Signaling 23
8
Troubleshooting 24
9 Technical
Specifications
26
10 Settings
(by the Dealer)
27
CONTENTS
6.7 Wireless Clone 15
1
Unpacking and Checking the Equipment
1
1.1 Supplied Accessories
1
2
Preparation 2
2.1 Battery Care Tips 2
2.2 Battery Recycling and Disposing 3
2.3 Charging the Battery 3
3
Accessories 5
3.1 Installing/ Removing the Battery Pack 5
3.2 Installing the Antenna 6
3.3 Installing the Belt Clip 6
3.4 Installing the Dust Cover over the Versatile Connector 6
3.5 Installing the Optional Speaker/ Microphone 7
4
Getting Acquainted 7
4.1 Transceiver Overview 7
4.2 Programmable Auxiliary Functions 9
5
Basic Operation 10
6
Advanced Operations 11
6.1 Key Lock (Backup)
11
6.2 Monitor/Squelch off 12
6.3 Scan 12
6.4 CALL 1/ CALL 2 14
6.5 Scrambler (Backup) 14
6.6 VOX 14
Page 5
ITEM
QUANTITY
Antenna
1
Belt clip
1
Dust cover
1
Screw
1
Battery
1
Charger
1
Power adapter
1
User's manual
1
Hand strap
1
1 UNPACKING AND CHECKING THE EQUIPMENT
Unpack the transceiver carefully. We recommend
that you identify the items listed in the
following table before discarding the packing
material. If any items are missing or have been
damaged during shipment, please contact the dealer
immediately.
1.1 Supplied Accessories
2 PREPARATION
2.1 Battery Care Tips
The
transceiver
is
equipped
with
a
KIRISUN
Liion/Ni- MH Battery Pack, the following using tips of which
can help you to get the best battery performance and
longest battery life.
1) Charge the new battery pack continuously for
4~7 hours before its initial using, which ensures the
maximum battery capacity and best performance in using.
2)
Charging the battery pack in non- KIRISUN equipments will
cause battery damage and the battery warranty invalid.
3)
The
battery
pack
can
be
charged
while
in
the
transceiver, and to ensure it is fully charged it's
recommended to charge the battery pack with the
transceiver turned off.
4)
The
ideal
temperature
to
store
the
battery
pack
is
25
(room
temperature).
Charging
the
battery
pack
at
a
low temperature (below 0
)
will cause electrolyte
leakage and damage to the battery pack.
5)
Charging
the
battery
pack
at a
high
temperature
(above
45
)
will cause decrease in battery discharge capacity and
affect
the
transceiver
performance.
The
KIRISUN
rapid charger
has
a
temperature
sensor,
which
ensures
the battery is charged within the temperature
range mentioned
Antenna
Power adapter Belt clip
Battery
above.
6)
A
new battery shows no significant life shortening even
after two-year storage. The new or used battery should be
Page 6
Charger
Dust cover
Screw
Hand strap
7)
If
recharge the battery pack after long storage, you should
charge
it
continuously
for
4~7
hours.8)
Do
not
leave
the
1 2
Page 7
Charger Indicator
Status
Red
The battery is in the state of charging.
Green
The battery is in full charge or
the
charger
is not connected with the battery.
Flashing red
Pre-charge
Yellow
The battery temperature is abnormal.
Dim
The battery is damaged and unable to
be charged.
transceiver
and
battery
in
the
charger
when
not
charging. Overlong
charging
will
shorten
the
battery
life.
(Please
do not use the charger as the transceiver's
mounting bracket.)
9)
Please use KIRISUN charger to ensure battery normal
work and
prolong
its
life.
The
battery
and
charger
are
designed under an integrated concept of power system.
2.2 Battery Recycling and Disposing
After
the
battery
life
expires,
the
Li-ion
battery
can
be recycled.
KIRISUN
goes
in
for
the
recycling
of
all
the
rechargeable batteries.
For
more
details
please
contact
your
local KIRISUN dealer.
2.3 Charging the Battery
A new battery, or a battery the power of which appears low
needs charging before using.
Note:
The battery is not fully charged in the factory, and probably
the new battery is falsely indicated as full charge. Before the
initial
use,
please
charge
the
new
battery
continuously
for
4~7 hours.
1
)
Connect the power adapter
with the
battery
charger.
Plug
the adapter
into
an
AC
wall
outlet and the
indicator turns green.
2
)
Place the battery or transceiver
into
the
charger
slot.
The indicator
turns
red
or
flashes, then
the
charger
gets
in
the state of
charging
automatically.
Charging
time
depends
on battery
capacity.
When
battery is
fully
charged
the
indicator turns green.
Notes:
1)
The
battery
is
not
fully
charged
in
the
factory.
Before
the initial
use,
please
charge
the
new
battery
Page 8
3 4
Page 9
2) The charger will stop charging and the indicator turns yellow
if
the
charger
detects
the
battery
is
damaged
or
if
the temperature of the battery is too high (higher
than 50
for Ni- MH battery or 40
for Li- ion battery).
3)
Do
not
charge
the
battery
longer
than
the
specified
time.
And
do
not
charge
the
battery
again
if it is
charged
fully, otherwise,
its
life
will
be
shortene d
or it
will
be damaged.
3.2 Installing the Antenna
Screw the antenna into
the connector at the top
of the transceiver by
holding the bottom of
the antenna and turn it
clockwise until secure.
3 Accessories
3.1 Installing/Removing the Battery Pack
To install the battery pack:
1)
Match
the
3
bulges
of
the battery
pac k
with
the corresponding
holes at the rear bottom of the
transceiver;
2)
Then
firmly
press
the
battery pack
downwards
to
lock
it
in place until a click is
heard.
To remove the battery pack:
1) Use your thumb to press the
belt clip, and one side of your
index finger to press the
release button;
2) And then pull the battery
3.3 Installing the Belt Clip
Match the grooves of the
belt clip with those on the rear of
the battery. Then press the belt
clip downwards to lock it in place.
3.4 Installing the Dust Cover over
the Versatile Connector
When not using the
optional Speaker/Microphone,
install the dust cover over
the versatile connector with the
supplied screw.
Page 10
5 6
Loading...