WARNING
Connections for standby power to a buildings electrical system must be
made by a qualified electrician and must comply with all applicable laws and
electrical codes. Improper connections can allow electrical current from the
generator to back feed into the utility lines. Such back feed may electrocute
utility company workers or others who contact the lines during a power outage,
and when utility power is restored, the generator may explode, burn, or cause
fires in the buildings electrical system.
WARNING
Always make a pre-operation inspection before you start the engine. You
may prevent an accident or equipment damage.
Place the generator at least 1m(3ft) away from buildings or other equipment
during operation.
Operate the generator on a level surface.
If the generator is tiled, fuel spillage may result.
Know how to stop the generator quickly and understand operation of all the
controls. Never permit anyone to operate the generator without proper
instructions.
Keep children and pets away from the generator when it is on operation.
Keep away from rotating parts while the generator is running.
The generator is a potential source of electrical shocks when misused; do
not operate with wet hands.
Do not operate the generator in rain or snow and do not let it get wet.
-2-
2. SAFETY LABEL LOCATIONS
2.1 Outside view (See Fig.1)
Maintenance
cover
Control panel
Dipstick
Oil Drain Bolt
Air cleaner
Fuel level indicator
Fuel filler cap
Air Exhaust hole
Fig.1 Outside view
-3-
Hot caution
Air intake hole