KIP 2300, KIP2300 User Manual

KIP 2300 User Manual

Version A.1

1

We highly appreciate your purchasing our KIP 2300 Image Scanner.

This User's Manual contains functional and operational explanation for KIP 2300 Image Scanner.
Read this User's Manual carefully before use in order to understand the KIP 2300 Image Scanner
completely and to use more efficiently.
Keep this User's Manual for future reference.

1. For U.S.A.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

2. For Europe
This equipment complies with the requirements in Pub.22 of CISPR Rules for a Class B
computing device.
Operation of this equipment in a residential area may cause unacceptable interference to radio
and TV reception requiring the operator to take whatever steps are necessary to correct the
interference.

Do not install Machine around electronics equipment or precision instruments.
It may be influenced by electrical reason or vibration while operation.

If Machine is installed near electronics equipment, such as TV or radio, interference to
equipment, such as noise or flickering may be occurred.
Use separate power line and install Machine as far as such equipment.

The International

ENERGY STAR ® Office Equipment Program is an international program that

promotes energy saving through the penetration of energy efficient computers and other office
equipment. The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors can
participate voluntarily. The targeted products are office equipment such as computers, monitors,
printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are
uniform among participating nations.

The symbol shown indicates that this product conforms to Directive
2002/96/EC of the European Parliament and the council of 27 January
2003 on waste electrical and electronic equipment (WEEE) and does not
apply to countries outside of EU.

As an ENERGY STAR ® Partner, Katsuragawa Electric Co., Ltd. has determined
that this product meets the

ENERGY STAR ® guidelines for energy efficiency.

The symbol shown indicates that this product conforms to
SJ/T11364-2006 of People’s Republic of China Electronic
Industry Standard and does not apply to countries outside of
People’s Republic of China.

The symbol shown indicates that this product conforms to GB
18455-2001 11364-2006 of National Standard of the People’s
Republic of China and does not apply to countries outside of
People’s Republic of China.

2

Following warnings are very important to use this equipment safely and to prevent the operator
from danger and his/her property from being damaged.

Hazardous or damage degree is classified and shown as follows when this machine is erroneously
used ignoring this USER'S MANUAL.

WARNING

This caution mark denotes that the failure to follow given instructions in
handling the machine could result in a death or serious injury.

CAUTION

This caution mark denotes that the failure to follow given instructions in
handling the machine could result in an injury or physical damage only.

This symbol signifies what must not be done.

This symbol signifies General Mandatory Action.

WARNING FOR THE SAFETY (OBSERVE THESE WARNING)

3

WARNING

1. Power source should be rated from 100V - 240V +6/-10%, 6A or
higher, and 50/60Hz.

2. It is preferable that the used power circuit is provided with a dedicated
breaker.

3. Install the machine as close as possible to the outlet.

4. When you wish to move the machine to another place, make sure to
ask your service engineer.

Connect the scanner and Ground with each other surely with the
grounding wire. Otherwise, it is dangerous for you if you receive an electric
shock or at the time of lightning. If the outlet does not have a Grounding
Terminal or if it is impossible to connect, call the vendor or service
professional for the installation.

Do not disassemble or tamper the machine. Otherwise, it may cause a fire
or receiving an electric shock.

1. Do not use a multi-wiring connector that might raise the temperature of
the outlet abnormally and cause a fire.

2. Do not put anything heavy on the power cord. It may cause a fire or
receiving an electric shock.

3. Do not step on the power cord, and do not damage or process it. It
may also cause a fire or receiving an electric shock.

4. Do not tie the power cord or make a knot on it. It may also cause a fire
or receiving an electric shock.

5. Do not put a flower vase, a flowerpot or a water-filled glass on the top
of the machine. If the water spilt out, it may also cause a fire or
receiving an electric shock.

1. If the machine generates abnormal smell or noise, turn it off and then
disconnect the power plug from the outlet necessarily.

2. Do not handle the power plug with the wet hand positively. It may
cause to receive an electric shock.

3. Insert the power plug into the outlet completely. If the power plug is not
inserted completely, it may cause a fire.

4. Use only the attached power cord.

Make sure to catch the Plug when you unplug the machine.
Otherwise, you may break the cord and may result in a fire or receiving an
electric shock.

4

CAUTION

Do not install the machine at the following places.

1. Humidified or dusty place.

2. Unstable floor. (When the machine comes down, it may cause the
injury.)

1. Unplug the machine before you move it to another place. Otherwise, the
power cord may be damaged and may result in a fire or receiving an
electric shock.

2. If nobody operates the scanner in the night time, make sure to turn it off
for the safety.

3. If nobody operates the machine for a long time during consecutive
holidays, make sure to turn it off for the safety.

4. Nothing should be put near the power plug so as to disconnect it quickly
anytime.

Be careful not to catch your hand between Upper Unit and Main Unit when
you close the Upper Unit.

LED Safty (Safty of LED Products)

“Caution - Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure”

As the LED on the Light Source PCBs (PW12130 & PW12131) are Class 2 LED singularly, it
is not allowed for using it with disassembling or converting.

Classification of LED product :

- CLASS 1 LED PRODUCT
IEC 60825-1:2001
EN 60825-1:1994 + A2:2001 + A1:2002

- Maximum class of the embedded LED : CLASS 2 (WHITE LED, Maximum power : 4.0mW)

5

POWER CORD INSTRUCTION

The installation of (or exchange to) a power plug which fits in the wall outlet of the installation location
shall be conducted in accordance with fallowing:

WARNING

Selected a power plug which meets the following criteria;

- The plug has a voltage and current rating appropriate for the product’s rating marked on its
name plate.

- The plug meets regulatory requirements for the area.

- The plug is provided with a grounding pin or terminal.
If the appropriate plug does not fit the wall outlet in the installation, the customer shall install an
appropriate outlet.

Connector Type:

Configuration Standard Rating(minimum) Usually found in

IEC60320:C13 7A 250V(IEC)

7A 125V(UL)

Plug Type : Model Rating 220-240V

Configuration Standard Rating(minimum) Usually found in

CEE7/7 7A 250V European countries
KS C 8305 7A 250V Korea

AS/NZS 3112 7A 250V Australia

New Zealand
GB1002
GB2099.1

7A 250V China

IRAM 2073 7A 250V Argentina
BS 1363 7A 250V British

SASO 2203 7A 250V Saudi Arabia

BS 546A
IS-1293
SABS-1293

7A 250V British

India

South Africa

SEV 1011 7A 250V Switzerland

Plug Type : Model Rating 120V

Configuration Standard Rating(minimum) Usually found in

NEMA 5-15P 7A 125V US

Canada

(UL Listed Power Cord

Set only)

6

Cord Type

Standard Rating(minimum) Usually found in

SVT 3X18AWG Long <2.4m 7A 125V North America

H05VV-F 3X0.75mm2 7A 250V European countries

Argentina

RVV 3X0.75mm2 7A 250V China

Chapter 1 Before Use 1-1

Chapter 1

Before Use

page

1. 1 Installation Requirements 1- 2

1. 2 Features 1- 4

1. 3 Specifications 1- 5

1. 4 Name & Function of Each Part 1- 7

1. 4. 1 Front view 1- 7

1. 4. 2 Rear view 1- 9

1. 5 Specifications for Scan Original 1-10

1. 5. 1 Originals Prohibited from Duplication 1-10

1. 5. 2 Specifications for the scan original 1-11

Chapter 1 Before Use 1-2

1. 1 Installation Requirements

The following conditions have to be satisfied when installing the KIP2300 Scanner.

1. Satisfy the following input power condition.

Voltage 100 - 240V +6%/-10%
Current 6A or higher
Frequency 50 or 60Hz.

KIP2300 can be connected to the outlet simply so far as the voltage is within 100 - 240V.
(+6% and -10% are acceptable)

2. Connect the power plug to the grounded outlet.

3. To completely disconnect the equipment from the power source, please draw the power plug
from the outlet. The outlet must be easily accessible near the equipment.

4. The temperature must be within 10 through 32 degrees centigrade, and the humidity must be
within 20 through 80%.

5. Keep the equipment away from fire, dust and direct sunlight. If it is impossible to avoid the
direct sunlight, please pull the curtain to intercept the sunlight.

7. Keep enough space around the machine as follows.
(The following values are the least requirements. Please keep a wider space if possible.)

1600mm

600mm 600mm

1000mm

(2000mm is required if the
original is thicker than 1.2mm)

(Front side)

(Rear side)

KIP2300

Chapter 1 Before Use 1-3

Machine Noise Information Ordinance 3. GSGV January 18, 1991 :
The maximum sound pressure level is equal or less than 70dB (A) according to ISO 7779.

Reference

NOTE

1. For U.S.A.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

2. For Europe
This equipment complies with the requirements in Pub.22 of CISPR Rules for a Class B
computing device.
Operation of this equipment in a residential area may cause unacceptable interference
to radio and TV reception requiring the operator to take whatever steps are necessary
to correct the interference.

Do not install Machine around electronics equipment or precision instruments.
It may be influenced by electrical reason or vibration while operation.

If Machine is installed near electronics equipment, such as TV or radio, interference to
equipment, such as noise or flickering may be occurred.
Use separate power line and install Machine as far as such equipment.

Chapter 1 Before Use 1-4

1. 2 Features

Large format full color image scanner

KIP2300 is a full color image scanner that provides various copy/scan operations with being
combined with KIP IPS controller. It provides the following 4 modes for scanning and copying.

- 24 bit color mode

- 8 bit gray mode

- 4 bit gray mode

- Binary (black & white) mode

Recognizable of various original widths

KIP 2300 Scanner can recognize the following kinds of standard original widths as well as any
non-standard widths ranging from 210mm to 1066.8mm (42”).
Metric standard original widths : A0, A1, A2, A3, A4, 36”
Engineering/Architecture widths : 36”, 34”, 30”, 24”, 22”, 18”, 17”, 12”, 11”, 8.5”

High resolution scanning

KIP2300 scanner’s 600dpi optical resolution allows for producing high quality scan/copy image
from various types of original image. Scan resolution can be increased or decreased between
100 and 2400dpi as required.

Acceptable of extensive original thickness

KIP2300 accepts a sheet type original as well as a board type one. The acceptable thickness
range is from 0.05mm to 16.0mm.

Dual original feeders

The lower original feeder accepts all supported thicknesses and sizes of originals. The original is
set with face down and ejected to the rear tray.
The upper original feeder accepts all sizes of sheet type original that is thinner than 1.49mm. The
original is set with face up for enabling an operator to check the image or orientation before
scanning. The original fed from the upper original feeder is ejected from the lower original feeder.

High-speed data transfer

If the HIL Card is installed onto the KIP IPS (or network PC connected with KIP2300) and
KIP2300 scanner is connected to the IPS with dual cables (USB 2.0 cable and HIL cable), the
data transfer from scanner to IPS can be accomplished much faster. (NOTE : PCI Express slot is
required for accepting HIL Card.)

Chapter 1 Before Use 1-5

1. 3 Specifications

Model KIP2300 Image Scanner
Type Desktop scanner
Reading sensor 3 CCD Reduction Optical System

(3 CCD of RGB 7450 pixels)

Optical Resolution Main scanning (horizontal) direction 600dpi

Sub scanning (vertical) direction 600dpi
Range of Scan Resolution 100 – 2400dpi
Scan mode Binary mode

4 bit gray mode

8 bit gray mode

24 bit color mode
Scanning method Sheet through type
Scan speed Monochrome/Gray mode

100dpi : 12”/sec (lower feeder), 5”/sec (upper feeder)

600dpi : 5”/sec (lower feeder), 5”/sec (upper feeder)

2400dpi : 1.25”/sec (lower feeder), 1.25”/sec (upper feeder)

Color Mode

100dpi : 12”/sec (lower feeder), 5”/sec (upper feeder)

600dpi : 2”/sec (lower feeder), 2”/sec (upper feeder)

2400dpi : 0.5”/sec (lower feeder), 0.5”/sec (upper feeder)
Original type Sheet type & board type

- Upper original feeder can accept 0.05-0.1mm.

- Lower original feeder can accept 0.05-16.0mm.
Maximum reading width 914.4mm (36”)
Transportable original
length

Max. 16,000mm
Min. 210mm

NOTE : 48” is the maximum length for “board type” original.
Transportable original
width

Max. 1066.8mm (42”)

Min. 210mm
Thickness of original Max. 16mm

Min. 0.05mm
Placement of original Centered
Light source White LED
Warm up time Less than 10 seconds
Memory 256MB DDR DIMM
Operation system Windows Vista, XP & 2000
Interface USB 2.0 : for controlling & image data transfer

HIL (High-speed Image Link) : for image data transfer

NOTE : Connected PC needs to have a PCI Express card slot for

installing the HIL Add-in Card
Memory capacity From 256MB (standard) to 2GB (Option)

NOTE

Specifications may change without notification.

Chapter 1 Before Use 1-6

Power source Voltage

100 - 120V +6%/-10%

200 - 240V +6%/-10%

Note : Scanner accepts any voltage so far as it is within 100-240V

+6%/-10%.

Frequency

50 or 60Hz
Max. power consumption Less than 120W
Average power
consumption

(US : 120V)

- During scanning 120W

- Stand by 50W

- In Power Save Mode 0W

(EUR / ASIA : 200-240V)

- During scanning 120W

- Stand by 50W

- In Power Save Mode 0W

Dimension 1,366mm (Width) x 543mm (Depth) x 318mm (Height)

NOTE : Original Guides, Original Tray and Pedestal are excluded.
Weight About 76kg
Environmental conditions Temperature

10 - 32 degrees centigrade

Humidity

15 - 85%RH (No dew)

(Recommended)

23 degrees centigrade and 60% RH (No dew)
Acoustic noise Stand by Less than 55db

During scanning Less than 60db

Impulse sound Less than 70db
Option Pedestal (Scanner Stand)
Stacking capacity of trays Front Steel Tray

- Max. number of originals : about 20 sheets of 36”x48”

- Max. weight of originals : 2.2kg/square meter

Rear Steel Tray

- Max. number of originals : about 50 sheets of 36”x48”

- Max. weight of originals : 5kg/square meter

NOTE

Specifications may change without notification.

Chapter 1 Before Use 1-7

1. 4 Name & Function of Each Part

1. 4. 1 Front view

BOARD

1 2 3

4

5 6

6

5

8

7

11

10

9

Chapter 1 Before Use 1-8

No. Name Function

1 Upper Original Feeder Upper Original Feeder accepts a sheet type original that is 0.05-1.49mm in

thickness. Please set the original with face down. The original fed from here
Feeder is ejected to the front side of scanner via Lower Original Feeder.

2 Lower Original Feeder Lower original Feeder accepts not only a sheet type original that is 0.05-1.49

in thickness, but also a board type original that is 1.5-16.0mm in thickness.
Please set the original with face down. The original fed from here is ejected to
the rear side of scanner and received by the Rear Steel Tray.

3 Upper Original Feeder

Indicator

This lights green when the Upper Original Feeder can accepts original
insertion, and does not light when it can not accept.

4 Lower Original Feeder

Indicator

This lights green when the Upper Original Feeder can accepts original
insertion, and does not light when it can not accept. And in the Board Original
Mode, it blinks green when the scanner detects original size.

5 Original Guides These guides can be shifter left and right according to the original width, and

prevent the original from skewing during scanning.
6 Levers Unlocking the Levers allow for opening the Scanner Upper Unit.
7 Board Button & Lamp Pressing the Board Button enables or disables Board Original Mode. The

Board Lamp lights green when the Board Original Mode is enabled.
8 Stop Button & Lamp Pressing the Stop Button during scanning will stop scanning and original

transportation in the middle, and one more will eject the original to either front

or rear.
9 Power Lamp This shows the status of scanner.

- Blinking in green : During initialization (not ready)

- Lighting in green : Ready for scanning or during scanning

- Lighting in orange : Scanning (original transportation) is paused

- Blinking in orange : Ejecting the original

- Lighting in red : Scanner has any error

10 Front Steel Tray Helps feeding a board type original into the Lower Original Feeder.

Max. number of originals : about 20 sheets of 36”x48”

Max. weight of originals : 2.2kg/square meter

11 Rear Steel Tray Receives the original ejected from the scanner after scanning.

Max. number of originals : about 50 sheets of 36”x48”

Max. weight of originals : 5kg/square meter

Chapter 1 Before Use 1-9

1. 4. 2 Rear view

No. Name Function

1 Rear Counter Rollers Help to transport the original when ejected.
2 USB Terminal USB cable is connected.

- Connected to the PC

- Type B Connector

- 3.3V max

3 HIL Terminal HIL Connector is connected.

- Connected to the PC

- 3.3V max

4 Inlet Power cord is connected.

1

23 4

Chapter 1 Before Use 1-10

1. 5 Specifications for Scan Original

1. 5. 1 Originals Prohibited from Duplication

It may be illegal to duplicate or copy certain types of originals and you may be punished by local or
regional laws, if copies are made of these types of originals.
Please be aware of your local or regional laws and which originals they forbid you to duplicate.

Some Examples:
[Originals prohibited from copying by the law(s)]

1. Do not copy Currency (Bill, Money, Bank Note, etc.), Government issued Negotiable
Instruments (National Bonds, Security, Local Debt Bonds, etc.).

2. Do not copy Foreign Currency or Foreign Negotiable Instruments.

3. Do not copy unused postal stamps or government postcards without permission to make
replica from said Governments.

4. Do not copy Government issued revenue stamps, certificate stamps that are prescribed by
Liquor Tax Act or the Commodity Tax Act.

[Special items which require your attention]

1. The government issues warnings if you are to copy private issued securities (stock certificate,
draft, check, goods ticket, etc.), commutation ticket or book of tickets, excluding that some
specific company copies such originals as many as it requires for its own business.

2. We recommend you not copy originals as government issued passports, public or private
issued licenses, automobile inspection certification, ID and tickets passes or meals.

[Originals protected by the copyright]

It is prohibited to copy originals such as books, music, paintings, printed copies, maps, drawings,
movie posters and pictures which are protected by the copyright laws.
Please see your local or regional laws.

Chapter 1 Before Use 1-11

1. 5. 2 Specifications for the scan original

Original’s thickness which KIP2300 scanner accepts is 0.05 through 16mm. Originals are divided
into 2 types such as sheet type and board type in terms of the thickness.

- Sheet type : 0.05 through 1.49mm

- Board type : 1.50 through 16.0mm

Sheet type original Board type original
(0.05 through 1.49mm) (1.50 through 16mm)

The available original size differs according to the type.

Sheet type Board type
Length 210 through 16000mm 210 through 1219mm
Width 210 through 1066.8mm 210 through 914mm
Weight - 2.2kg / square meter

Do not scan the following types of original as it may damage the original or scanner itself.

With stick-on label

Torn

Paste