kioxia KPM51MUG800G User Manual

PM5-M Series

(KPM51MUG/KPM5XMUG/KPM5VMUG/KPM5WMUG)

Enterprise Write Intensive SSD

PM5-M 12.0 Gbit/s SAS SSD is optimized for write-intensive applications, including online transaction processing (OLTP) and e-commerce. The Series is designed to deliver high levels of performance, quality and reliability for mission critical, hyperscale and virtualized environments.

Featuring KIOXIA Corporation’s 64-layer BiCS FLASH™ 3D memory, this 5th generation enterprise SAS SSD PM5-M Series oers 10 DWPD (Drive Writes Per Day) with capacities up to 3.2 TB.

Product image may dier from the actual product.

Key Features

• 12.0 Gbit/s SAS interface with single/dual port and MultiLink SAS™ support

• Capacities from 400 GB to 3.2 TB

• T10 Multi-Stream Write support

• Up to 385K random read IOPS (4 KiB) in dual port mode

• 2.5 inch form factor, 15 mm Z-Height

• 10 DWPD with 100 % Random Write Workload

• Power-Loss-Protection and End-to-End Data Protection including T10 DIF

• Pin-3 Power Disable Support

• Sanitize Instant Erase (SIE) option

• Self-Encrypting (SED) option

• Self-Encrypting (SED), FIPS 140-2 validated option

• 5-year limited warranty

[1, 4]

[2, 4]

[2, 3, 4]

Key Applications

• Mission critical enterprise workloads

• Hyperscale & virtualized environments

• Online transaction processing (OLTP)

• E-commerce

Specications

Model Number KPM51MUG3T20 KPM51MUG1T60 KPM51MUG800G KPM51MUG400G

SIE Model Number KPM5XMUG3T20 KPM5XMUG1T60 KPM5XMUG800G KPM5XMUG400G

SED Model Number KPM5VMUG3T20 KPM5VMUG1T60 KPM5VMUG800G KPM5VMUG400G

SED FIPS Model Number KPM5WMUG3T20 KPM5WMUG1T60 KPM5WMUG800G KPM5WMUG400G

Physical

Capacity 3,200 GB 1,600 GB 800 GB 400 GB

Interface SAS-3.0

Interface Speed 12.0 Gbit/s, 6.0 Gbit/s, 3.0 Gbit/s, 1.5 Gbit/s

Memory Type BiCS FLASH™ TLC

PM5-M | Enterprise Write Intensive SSD | Product Brief

Rev.1.0

Specications (Continued)

Capacity 3,200 GB 1,600 GB 800 GB 400 GB

Performance (in dual port mode)

Sustained 128 KiB Sequential Read 2,100 MB/s

Sustained 128 KiB Sequential Write 2,100 MB/s 1,260 MB/s

Sustained 4 KiB Random Read 385K IOPS 370K IOPS 340K IOPS 270K IOPS

Sustained 4 KiB Random Write 230K IOPS 150K IOPS

Power Requirements

Supply Voltage 5 V + 10% / -7% | 12 V ± 10%

Power Consumption 5.0 W Typ.

Reliability

MTTF 2,500,000 hours

DWPD 10

Warranty 5 years

Mechanical

Height 15.0 mm + 0, -0.5 mm

Width 69.85 ± 0.25 mm

Length 100.45 mm Max

Wight 130 g Max.

Environmental

Temperature (Operating) 0 °C to 60 °C

Humidity (Operating) 5 % to 95 % R.H. (No condensation)

Vibration (Operating) 21.27 m/s

Shock (Operating) 9,800 m/s

Denition of capacity: KIOXIA Corporation denes a megabyte (MB) as 1,000,000 bytes, a gigabyte (GB) as 1,000,000,000 bytes and a terabyte (TB) as 1,000,000,000,000 bytes. A computer operating system, however, reports storage capacity using powers of 2 for the denition of 1GB = 2^30 = 1,073,741,824 bytes and therefore shows less storage capacity. Available storage capacity (including examples of various media les) will vary based on le size, formatting, settings, software and operating system, such as Microsoft Operating System and/or pre-installed software applications, or media content. Actual formatted capacity may vary.

A kibibyte (KiB) means 2^10, or 1,024 bytes.

MTTF (Mean Time to Failure) is not a guarantee or estimate of product life; it is a statistical value related to mean failure rates for a large number of products which may not accurately reect actual operation. Actual operating life of the product may be dierent from the MTTF.

DWPD: Drive Write Per Day. One drive write per day means the drive can be written and re-written to full capacity once a day every day for ve years, over the stated product warranty period. Actual results may vary due to system conguration, usage and other factors.

Read and write performances may vary depending on the host device, read and write conditions, and le size.

IOPS: Input Output Per Second (or the number of I/O operations per second).

[1] The Sanitize Instant Erase (SIE) option supports Crypto Erase, which is a standardized feature dened by the technical committees (T10) of INCITS (the InterNational Committee for Information Technology Standards).

[2] SED (Self-Encrypting Drive) supports TCG Enterprise SSC.

[3] FIPS 140-2 validated (Level 2) denes security requirements for cryptographic module by NIST (National Institute of Standards and Technology).

[4] Optional security feature compliant drives are not available in all countries due to export and local regulations.

*MultiLink SAS is a trademark of the SCSI Trade Association. *All other company names, product names, and service names mentioned herein may be trademarks of their respective companies.

{ 2.17 Grms } ( 5 to 800 Hz )

{ 1,000 G } ( 0.5 ms duration )

PM5-M | Enterprise Write Intensive SSD | Product Brief

Rev.1.0