Kinze 3700 User Manual

MODEL 3700

FRONT FOLDING PLANTER

PARTS MANUAL

M0233-02 Rev. 6/14

This manual applies to: Model: 3700 and 3700 ASD Front Folding Planters 2010 Production to 2014 Production

Record the model number and serial number of your planter along with date purchased:

Serial Number ___________________________________

Date Purchased __________________________________

Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement, production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves the right to change speciﬁcations or design without notice and without incurring obligation to install the same on machines previously manufactured.

Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the machine will travel when in use, unless otherwise stated.

Kinze®, the Kinze® logo, Twin-Line®, Interplant®, and EdgeVac® are registered trademarks of Kinze Manufacturing, Inc.

M0233-02Model 3700

ROW UNIT

Shank Assembly, Seed Tube, and Depth Adjustment ....P1

Pneumatic Down Pressure Package Option ...........P3

Air Clutch, Pull Row Unit ..........................P5

Parallel Arms, Mounting Support Plate, and

Quick Adjustable Down Forces Springs Option. . . . . . . P7

Ag Leader Electric Clutch .........................P9

15" Seed Opener Disc Blade/Bearing

Assembly and Scrapers .......................P11

Gauge Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P13

“V” Closing Wheels .............................P15

Hopper Support and Meter Drive ...................P17

Seed Hopper and Lid. . . . . . . . . . . . . . . . . . . . . . . . . . . . P19

Finger Pickup Seed Meter . . . . . . . . . . . . . . . . . . . . . . . . P21

Brush-Type Seed Meter . . . . . . . . . . . . . . . . . . . . . . . . . . P23

EdgeVac Seed Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . P25

Granular Chemical Hopper and Hopper Panel Extension

Granular Chemical Meter and Meter Drive ...........P29

Granular Chemical Banding Options . . . . . . . . . . . . . . . . P31

Spring Tooth Incorporator ........................P33

Row Unit Mounted No Till Coulter ..................P34

Row Unit Mounted Disc Furrower ..................P35

Row Unit Mounted Residue Wheel .................P37

Coulter Mounted Residue Wheels . . . . . . . . . . . . . . . . . . P39

Frame Mounted Coulter W/Residue Wheels ..........P41

EDGEVAC SYSTEM

Vacuum Fan System, 24 Row 20" and 24 Row 22". . . . . P44

Vacuum Fan Assembly, 24 Row 20" and 24 Row 22"

Vacuum Fan Assembly, 24 Row 30" and 36 Row 20"

Vacuum Fan Hydraulic Components,

24 Row 20" and 24 Row 22" ....................P49

Vacuum Fan Hydraulic Components,

24 Row 30" and 36 Row 20" ....................P51

Vacuum Fan Reservoir Assembly,

24 Row 20" and 24 Row 22" ....................P53

Vacuum Fan Reservoir Assembly,

24 Row 30" and 36 Row 20" ....................P55

Reservoir Hose Supports/Clamps on Hitch ...........P56

Distribution Hoses, 24 Row 20" . . . . . . . . . . . . . . . . . . . . P57

Distribution Hoses, 24 Row 22" . . . . . . . . . . . . . . . . . . . . P59

Manifolds and Distribution Hoses, 24 Row 30" ........P61

Manifolds and Distribution Hoses, 36 Row 20" ........P63

Vacuum Fan Manifolds, 24 Row 20"/24 Row 22"

(EdgeVac/Conventional) .......................P65

Vacuum Fan Manifolds, 24 Row 20"/24 Row 22"

(EdgeVac/ASD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P67

Vacuum Fan/Manifold Mounting Supports and Hardware

PTO Pump Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . P71

....P27

.....P45

.....P47

. . . . . P69

AIR SEED DELIVERY SYSTEM (ASD)

ASD Fan System ...............................P73

ASD Hydraulic Schematic, 24 Row 20"/24 Row 22" ....P75

ASD Hydraulic Schematic, 24 Row 30"/36 Row 20" ....P76

ASD Hoses, 24 Row 20" and 24 Row 22" . . . . . . . . . . . . P77

ASD Hoses, 24 Row 30" .........................P79

ASD Hoses, 36 Row 20" .........................P81

ASD Manifolds and Distribution Hoses ..............P83

ASD Entrainer Assembly, 24 Row 30" ...............P85

ASD Entrainer Assembly, 36 Row 20" ...............P87

ASD Tank Assembly (Prior to 2013 Production) .......P89

ASD Tank Assembly (2013 Production and on) . . . . . . . . P91

ASD Scale Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P93

ASD Mechanical Row Unit. . . . . . . . . . . . . . . . . . . . . . . . P95

ASD EdgeVac Row Unit. . . . . . . . . . . . . . . . . . . . . . . . . . P97

ASD Catwalk, 24 Row 20" and 24 Row 22" ...........P99

ASD Catwalk, 24 Row 30" . . . . . . . . . . . . . . . . . . . . . . . P101

ASD Catwalk, 36 Row 20" . . . . . . . . . . . . . . . . . . . . . . . P103

ASD Stair, 24 Row 30" ..........................P105

BASE MACHINE

Front Hitch Assembly/Safety Chain . . . . . . . . . . . . . . . . P107

Hitch and Linkage Assembly,

24 Row 20" and 24 Row 22" ...................P110

Hitch and Linkage Assembly,

24 Row 30" and 36 Row 20" ...................P111

Front Hitch Assembly (Rear Section). . . . . . . . . . . . . . . P113

Front Wear Pads ..............................P114

Tower Assembly, 24 Row 20" and 24 Row 22" .......P116

Tower Assembly, 24 Row 30" and 36 Row 20" .......P117

Stroke Limiter/Detent Valve Assembly and Linkage. . . . P119

Hinge and Wing Assemblies .....................P121

Hinge and Wing Assemblies .....................P122

Wing Frame, 24 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . P123

Wing Frame, 36 Row 20" . . . . . . . . . . . . . . . . . . . . . . . . P125

Hose Take-Up ................................P127

Axle, 24 Row 20" and 24 Row 22". . . . . . . . . . . . . . . . . P129

Transport Lockup, 24 Row 20" and 24 Row 22". . . . . . . P130

Axle and Transport Lockup,

24 Row 30" and 36 Row 20" ...................P132

Transport Wheel and Hub Assembly ...............P133

Wheel Module Assembly . . . . . . . . . . . . . . . . . . . . . . . . P135

Ground Drive Tire Assembly .....................P138

Contact Wheel Assembly. . . . . . . . . . . . . . . . . . . . . . . . P139

Point Row Clutch ..............................P141

Two-Speed Point Row Clutch. . . . . . . . . . . . . . . . . . . . . P143

Two-Speed Point Row Clutch

Wheel Module Extensions. . . . . . . . . . . . . . . . . . . . . P145

i Rev. 6/13

Model 3700M0233-02

Table Of Contents

Hydraulic Drive, 24 Row 20" and 24 Row 22" ........P147

Airline Fittings and Hoses, 24 Row 30" .............P149

Airline Fittings and Hoses, 36 Row 20" .............P150

Air Compressor and Dual Solenoid Assembly. . . . . . . . P153

Accumulator Assembly .........................P155

Seed Rate Transmission and Driveline .............P156

Ratchet/Sprocket Assembly ......................P159

Row Marker Assembly ..........................P160

Row Marker Spindle/Hub/Blade. . . . . . . . . . . . . . . . . . . P163

HYDRAULICS

Slave Cylinders ...............................P165

Master Cylinder ...............................P165

Hitch Paralled Linkage Cylinder. . . . . . . . . . . . . . . . . . . P166

Assist Cylinder, 36 Row 20" .....................P167

Row Marker (Cushion) Cylinder. . . . . . . . . . . . . . . . . . . P168

Helper Cylinder, All Sizes. . . . . . . . . . . . . . . . . . . . . . . . P169

Tongue Cylinder, 24 Row 20" and 24 Row 22" .......P170

Tongue Cylinder, 24 Row 30" and 36 Row 20" .......P171

Valve Block on Front Hitch. . . . . . . . . . . . . . . . . . . . . . . P173

Valve Block on Tower Assembly. . . . . . . . . . . . . . . . . . . P174

Valve Block on R.H. Wing .......................P175

Valve Block on L.H. Wing . . . . . . . . . . . . . . . . . . . . . . . . P177

Pilot Pressure Booster Valve Block ................P178

Valve Block on L.H. and R.H. Wheel Module . . . . . . . . . P178

Junction Block on Hose Take-Up ..................P179

Detent Lever Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P180

Junction Block - Located on L.H. Wing .............P180

Stroke Limiter Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . P181

Pilot Operated Check Valve ......................P181

Solenoid Valve (G1K276) . . . . . . . . . . . . . . . . . . . . . . . . P182

Solenoid Valve (G1K275) . . . . . . . . . . . . . . . . . . . . . . . . P182

Pressure Relief Valves ..........................P183

Check Valve ..................................P183

Flow Control Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P183

Clutch Valve Assembly ..........................P184

ASD Valve Block ..............................P185

Hydraulic Motor ...............................P186

Vacuum Fan Motor Valve Block Assembly,

24 Row 20" and 24 Row 22" ...................P187

Vacuum Fan Hydraulic Motor Assembly ............P188

Vacuum Fan Motor Valve Block Assembly,

24 Row 30" and 36 Row 20" ...................P189

Hydraulic System, 24 Row 20" and 24 Row 22" ......P191

Hydraulic Drive Hydraulic System,

24 Row 20" and 24 Row 22" ...................P193

Hydraulic System, 24 Row 30" . . . . . . . . . . . . . . . . . . . P195

Hydraulic System, 36 Row 20" . . . . . . . . . . . . . . . . . . . P197

ELECTRONICS

Electrical Components ..........................P199

Light/Reﬂective Decal Brackets and Extensions ......P202

KPM III Electronic Seed Monitor ..................P203

Miscellaneous Cobalt and Integra Parts ............P206

Planter Monitor Module (PMM) ...................P207

Kinze Cobalt Display (Prior to 2013 Production) ......P209

Kinze Vision Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . P211

Integra Display (Prior to 2013 Production). . . . . . . . . . . P213

ISOBUS Electric Clutch Package .................P215

Ag Leader Electric Clutch Package . . . . . . . . . . . . . . . . P217

ISOBUS Retroﬁt Cabling Package - Integra .........P219

FERTILIZER

Liquid Fertilizer Piston Pump Drive ................P221

Liquid Fertilizer Piston Pump Mount

and Ground Drive Wheel ......................P223

Liquid Fertilizer Hoses and Fittings ................P227

Liquid Fertilizer Piston Pump, NGP-6055 ...........P229

Liquid Fertilizer Piston Pump, NGP-7055 ...........P231

Liquid Fertilizer Piston Pump Flow Divider ..........P233

Piston Pump Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P235

Starter Liquid Fertilizer Package ..................P237

Low Rate Liquid Fertilizer Package ................P239

Liquid Fertilizer Tank and Quick Fill . . . . . . . . . . . . . . . . P241

Rear Trailer Hitch ..............................P243

DECALS, PAINT, AND MISCELLANEOUS ....P245

NUMERICAL INDEX. . . . . . . . . . . . . . . . . . . . . . P262

Rev. 6/13 ii

Shank Assembly, Seed Tube, and Depth Adjustment

M0233-02Model 3700

(IP1274)

Rev. 8/12

Shank Assembly, Seed Tube, and Depth Adjustment

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 GD24545

G10003 G10108

2 G10326 1 Hex Head Cap Screw, "-16 x 3¾"

G11387 1 Flat Washer, " SAE

3 G3303-98

G3303-108 G3303-16

GR0196 4 GD11962 1 Idler 5 GD1026 1 Sleeve, 1" Long 6 G10201 1 Special Washer, " x 1½" O.D. 7 GD1065 1 Idler Spring 8 GD7318 1 Sleeve, 1" Long 9 GD16245 1 Sun Shade (Rubber) 10 GD11845 1 Dust Cap 11 GD28390

G10312

G10620 12 --- 1 13 --- -

14 G10438 1 Hex Head Cap Screw, ½"-13 x ¾" 15 GB0265 1 Pivot Link, Depth Adjustment 16 GA10157 1 Shank W/Gauge Wheel Pivot Spindle And Set Screw 17 G11592

G11591 18 G10551

G11591 19 G11015 2 Hex Washer Head Cap Screw, "-16 x 1¼" 20 GB0274 1 Cover, Depth Adjustment 21 GB0266

GD3612 22 GD10993 1 Spring 23 GB0267 1 Lever, Depth Adjustment 24 GD11259 1 Sleeve, " I.D. x " O.D. x 1" Long 25 G10207 1 Washer, " O.D. x " I.D. x .134" (If Applicable) 26 GD13361 1 Pin, " x 1" 27 GB0285 1 Collar, Depth Adjustment 28 GD17014 1 Hose Guide 29 G10047

G11387

G10108

2 3 4

1 2 2

1 1

2-3

DESCRIPTION

Stop Hex Head Cap Screw, "-16 x 1½" Lock Nut, "-16

Chain, No. 41, 98 Pitch Including Connector Link (Mechanical) Chain, No. 41, 108 Pitch Including Connector Link (EdgeVac) Chain, No. 41, 16 Pitch Including Connector Link (Used W/Row Unit Extension Brackets) Connector Link, No. 41

Shield Carriage Bolt, "-18 x ¾" Serrated Flange Nut, "-18

See “Gauge Wheels” on page P13 See “KPM III Electronic Seed Monitor” on page P203

See “Planter Monitor Module (PMM)” on page P207

Hex Head Cap Screw, "-24 x 2¾", Grade 8 Nylon Lock Nut, "-24, Grade C

Clevis Pin, ¼" x 2½" Nylon Lock Nut, "-24, Grade C

Handle, Depth Adjustment Cap Plug

Hex Head Cap Screw, "-16 x 1¾" Flat Washer, " SAE Lock Nut, "-16

Rev. 6/14 P2

Pneumatic Down Pressure Package Option

M0233-02Model 3700

(RU157c/RU159a/RU157d/A12405)

Pull Row Unit Shown

NOTE: Items that are not referenced on this page may be referenced on

page P7.

Rev. 12/12

Pneumatic Down Pressure Package Option

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 GA11982

G10037

G10228 2 GD23995 1 Saddle 3 G11018

G11391

GD3180-30

4 GB0396 1 Head Mount 5 GB0397

GD19092

GD18011 6 GB0395 2 Bracket 7 GA2180 - Hanger Bearing, " Hex Bore 8 G10004

G11387

GD11963-04

G10108

9 GD17794 1 Link (not applicable with row unit extension brackets) 10 GB0393 1 Plate 11 G10037

G11389

G10228 12 G10130

G10923 13 G10438

G11389 14 --- -

15 G11220

G10071 16 GB0389 1 Plate 17 GB0398 1 Extension 18 G10039

G11389

G10111 19 GD11045 - Lock Clamp 20 --- -

1 1 1

2 2 2

2 2 2 2

7 2 7

2 Hex Head Cap Screw, ½"-13 x ¾"

4 4 4

DESCRIPTION

Air Spring Assembly Hex Head Cap Screw, ½"-13 x 1¼" Lock Washer, ½"

Hex Head Cap Screw, "-18 x 1¼" Flat Washer, " SAE Sleeve, " O.D. x " I.D. x ⁄"

Shoulder Nut, ¾"-16 Connector, " x " NPT Elbow, " x " NPT Extended (used on outer push units)

Hex Head Cap Screw, "-16 x 1¼" Flat Washer, " SAE

Spacer, ¼" Lock Nut, "-16

Hex Head Cap Screw, ½"-13 x 1¼" Flat Washer, ½" SAE (Lower Two Holes Only) Lock Washer, ½"

Square Head Machine Bolt, "-18 x 1¾" Flange Nut, "-18, No Serration

Flat Washer, ½" SAE

See “Parallel Arms, Mounting Support Plate, and Quick Adjustable Down Forces Springs Option” on page P7

Hex Socket Cap Screw, ½"-13 x 1½" Serrated Flange Nut, ½"-13

Hex Head Cap Screw, ½"-13 x 1¾" Flat Washer, ½" SAE Lock Nut, ½"-13

See “Air Clutch, Pull Row Unit” on page P5

Rev. 12/12 P4

(IP1265)

SPACER, 1.25 OD X 1.05D18891

HHCS 1/4-20 X 5/8 GR5 CS PLT

100202

#41 19 TOOTH SPROCKETR18313 RING, RETAINING 1.575 DIA EXTERNAL

11295

MS, SLOT FL HD #8-32 X 1/2 PLTD

11243

AIR HOUSING COVERR1894

HUB, SPROCKETR1829

CLUTCH SPRING

R18138

RATCHET GEAR

R18189

BUSHING, HEX

R1830

HHCS 1/4-20 X 3/4 GR5 CS PLT

10023

NUT-HEX 1/4-20 GR5 CS PLT

1010312

1/8 NPT MALE X 1/4 PUSH CONNECT

R181913

AIR CYLINDER

R1896

FILTER

R1898

PPHMS 1/4-20 X 3/8 GR1 CS PLT

11296

AIR CLUTCH HOUSINGR1895

PART NUMBERITEM

IP1265

JASON LUCAS

Air Clutch, Pull Row Unit

M0233-02Model 3700

ITEM PART NO. QTY.

(Per Row)

1 GD18891 1 2 G11239 3 3 GR1831 1 Sprocket, 19 Tooth 4 G11295 1 5 G11243 1 6 GR1894 1 7 GR1829 1 Sprocket Hub 8 GR1813 1 9 GR1818 1 10 GR1830 1 11 G10023 1 12 G10103 1 13 GR1819 1 14 GR1896 1 15 GR1898 1 16 G11296 1 17 GR1895 1

DESCRIPTION

Spacer, 1¼" O.D. x 1" Hex Head Cap Screw, 10-32 x ½"

Retaining Ring Slotted Flat Head Machine Screw, No. 8-32 x ½", Stainless Steel Air Housing Cover

Clutch Spring Ratchet Gear Hex Bushing Hex Head Cap Screw, ¼"-20 x ¾" Hex Nut, ¼"-20 Push Connect, " NPT Male x ¼" Air Cylinder (Includes Items 10 and 11) Filter Pan Head Machine Screw, ¼"-20 x ¾" x ¾" Air Clutch Housing

A GA12405 - Air Clutch Assembly, (Items 1-17)

Rev. 3/12

This page left blank intentionally.

(IP1277)

Parallel Arms, Mounting Support Plate, and Quick Adjustable

Down Forces Springs Option

M0233-02Model 3700

Rev. 6/13

Parallel Arms, Mounting Support Plate, and Quick Adjustable

Down Forces Springs Option

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 GD1113

G10230

G10104 2 GD10036 1 Mounting Support Plate 3 GB0218 8 Bushing, " I.D. x " O.D. x " Long 4 GD11422 2 Upper Parallel Arm 5 G11391 8 Flat Washer, " SAE 6 G10732

G11514 7 GB0186 2 Spring Anchor 8 GD14217 2 Tab Lock Pin, " x 1½" 9 GD8249

GD21337 10 G10752

G11514 11 GA5651 1 Lower Parallel Arm 12 G10751

G11514 13 GA1720 1 Bearing/Sprocket, " Hex Bore 14 G10004

G11091 15 G10007

G10230

G10104 16 GB0366 2 Extension Bracket 17 GA16830

GA16868

GD24352

GD24126

G11491

G10110

G11385

G10023 18 G10152 - Hex Head Cap Screw, "-11 x 9"

2 4 4

4 4

4 Standard Down Pressure Spring

2 2

4 4 4

1 1 1 1 2 2 2 2

DESCRIPTION

U-Bolt, 5" x 7" x "-11 Lock Washer, " Hex Nut, "-11

Hex Head Cap Screw, "-18 x 2" Lock Nut, "-18

Heavy Duty Down Pressure Spring Hex Head Cap Screw, "-18 x 2¼"

Lock Nut, "-18

Hex Head Cap Screw, "-18 x 1¾" Lock Nut, "-18

Hex Head Cap Screw, "-16 x 1¼" Serrated Flange Nut, "-16

Hex Head Cap Screw, "-11 x 1½" Lock Washer, " Hex Nut, "-11

Sensor Implement Switch Adapter Cable Sensor Bracket Implement Switch Bracket, Long Washer Lock Nut, ¼"-20, Grade B Flat Washer, ¼" SAE Hex Head Cap Screw, ¼"-20 x ¾"

A G6325X - U-Bolt Package For 5" x 7" Toolbar, Includes: (2) GD1113, (4) G10230, (4) G10104 B G1K528 - Implement Switch Kit, Includes: (1)A16868, (1)A16829, and (1)IS826

(Replaces GA13593)

Rev. 6/13 P8

Ag Leader Electric Clutch

M0233-02Model 3700

(IP1422)

Rev. 8/12

Ag Leader Electric Clutch

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 G3303-34

G3303-44 2 G10620 2 Serrated Flange Nut, ⁄"-18 3 G10310 3 Carriage Bolt, ¼"-20 x ¾", Grade 2 4 GA16374 1 Electric Clutch 5 GA10151 1 Meter Drive Assembly Complete, 11/19 Tooth 6 GB0331 1 Clutch Adapter Plate 7 G10338 2 Carriage Bolt, ⁄"-18 x 1¼" 8 G10621 3 Serrated Flange Nut, ¼"-20 9 G10687 1 Hex Head Cap Screw, "-16 x 5½" 10 G11387 2 Flat Washer, " SAE 11 GD23773 1 Chain Idler Spacer 12 GD11962 1 Idler 13 GD1026 1 Sleeve, 1⁄" Long 14 G11391 1 Flat Washer, " SAE 15 GD1065 1 Idler Spring 16 GD7318 1 Sleeve, 1" Long 17 G10201 1 Special Washer, " x 1½" O.D. 18 G10901 1 Lock Nut, "-16 19 G11091 3 Serrated Flange Nut, "-16 20 GD23774 3 Spacer 21 GA1720 1 Bearing/Sprocket, " Hex Bore 22 G10047 2 Hex Head Cap Screw, "-16 x 1¾" 23 G3303-88 1 Chain, No. 41, 88 Pitch Including Connector Link (Pull Row Unit)

DESCRIPTION

Chain, No. 41, 34 Pitch Including Connector Link (Mechanical)

Chain, No. 41, 44 Pitch Including Connector Link (EdgeVac)

Rev. 8/12 P10

(IP1272)

WELD, SHANK (PAINTED)

A10157

BUSHING, 5/8" 1.047 X .688 X .03 PL

102132

SLEEVE, PLTD 5/8 OD X .385 X 1.781

D112593

SCRAPER, DISK (PAINTED)

A2012L

HHCS 3/8-16 X 2-3/4 GR5 CS PLT

10325

NUT-FLG SER 3/8-16 HDN CS PLT

10622

HHCS 3/8-16 X 5/8 GR5 CS PLT

10328

HUB CAP, PLASTIC

D11845

BOLT, OPNR BLADE 5/8-11 LH GR5 PLT

D110178

BUSHING,1 X .656 X .09 HARD/BLK OX

102049

RIVET BUTTON HD 1/4 x 1/2 PLTD

1042710

HOUSING, BEARING (RIBBED) PLTD

D10473

BEARING, 5/8"

A201412

DISC BLADE, 15" 3.5MM

D1130613

SCRAPER, PAINTED

B0301

HSHCS 5/16-18 X 1 GRU AS PLT

10912

PART NUMBERITEM

JON HAZELETT IP1272

M0233-02Model 3700

15" Seed Opener Disc Blade/Bearing Assembly and Scrapers

P11 Rev. 9/11

15" Seed Opener Disc Blade/Bearing Assembly and Scrapers

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 --- - See “Shank Assembly, Seed Tube, and Depth Adjustment” on page P1 2 G10213 - Machine Bushing, " (.030" Thick)(As Required) 3 GD11259 1 Sleeve, " I.D. x " O.D. x 1" Long 4 GA2012R

GA2012L

5 G10325

G10622

6 G10328

G10622 7 GD11845 2 Dust Cap 8 GD11017 1 Special Hex Head Cap Screw, "-11 x 1½", L.H. Threads 9 G10204 2 Special Machine Bushing, " x 1" O.D. 10 G10427 12 Rivet, ¼" x ½" 11 GD10473 2 Bearing Housing 12 GA2014 2 Bearing 13 GD11306 2 Disc Blade, 3.5 mm x 15" 14 GB0301 1 Seed Tube Guard/Inner Scraper 15 G10912 2 Hex Socket Head Cap Screw, "-18 x 1", Grade 8

A GA8324 - Disc Blade/Bearing Assembly, Less Dust Cap (Items 10-13)

1 1

2 1

DESCRIPTION

Disc Scraper, R.H. Disc Scraper, L.H. (Shown)

Hex Head Cap Screw, "-16 x 2¾" Serrated Flange Nut, "-16

Hex Head Cap Screw, "-16 x " Serrated Flange Nut, "-16

Rev. 9/11 P12

(IP1268)

M0233-02Model 3700

Gauge Wheels

P13 Rev. 9/11

Gauge Wheels

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 --- - See “Shank Assembly, Seed Tube, and Depth Adjustment” on page P1 2 GA7975

GA7976 3 GB0276 2 Bushing, 1" I.D. x 1¼" O.D. x 1" Long (Per Arm) 4 G10014

G10228

G10216 5 GD11423 4 Half Wheel 6 GD1086 2 Tire 7 GD11453 2 Cover 8 G10924

G10620 9 G10338

G10620 10 G10010 2 Hex Head Cap Screw, "-11 x 3" 11 G10018

G10109 12 GA6171 2 Bearing 13 GD10991 2 Seal (Per Arm) 14 G10204 2 Special Machine Bushing, " x 1" O.D. 15 G10640 1 Grease Fitting, ¼"-28 (Per Arm) 16 G10940 - Machine Bushing, 1" (.048" Thick)

1 2 2

8 8

12 12

14 14

DESCRIPTION

Wheel Arm W/Grease Fitting, Bushings And Seals, L.H. (Shown) (Includes Items 3 and 13) Wheel Arm W/Grease Fitting, Bushings And Seals, R.H. (Includes Items 3 and 13)

Hex Head Cap Screw, ½"-13 x 1" Lock Washer, ½" Washer, ½" USS

Carriage Bolt, "-18 x 1¾" Serrated Flange Nut, "-18

Carriage Bolt, "-18 x 1¼" Serrated Flange Nut, "-18

Hex Head Cap Screw, "-18 x " Lock Nut, "-18, Grade 8

A GA7949 - Gauge Wheel Complete (Items 5-9 And 11-12) B G1K296 - Gauge Wheel Arm Bushing And Seal Driver Kit, Includes: (1) Seal Driver, (1)

Bushing Driver, (1) Instruction

Rev. 9/11 P14

“V” Closing Wheels

M0233-02Model 3700

(IP1208)

P15 Rev. 9/11

“V” Closing Wheels

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 GD9120

G10064 2 GD1085 2 Rubber Tire, 1" x 12" 3 GA6171 2 Bearing 4 GA6597

GA6171 5 GB0254

G10133

G10109 6 GA15197 1 Arm 7 GB0268 1 Wheel Arm Mount 8 G10001

G11387 9 G11419

G10315

G11387 10 GB0282 2 Stepped Bushing 11 GB0239 2 Eccentric Bushing 12 G10111 2 Lock Nut, ½"-13 13 GD8460 1 Spring 14 G1K345

GD14065

G10599

G10308

G10101 15 G10013

G11391

GD1109

G10230

G10107

1 1

1 1 1

1 2

1 1 2 3

2 2 2 2 2

DESCRIPTION

Nylon Half Wheel Hex Head Cap Screw, ¼"-20 x 1"

Cast Iron Closing Wheel W/Bearing Bearing

Lever Hex Head Cap Screw, "-18 x 1½" Lock Nut, "-18, Grade 8

Hex Head Cap Screw, "-16 x 1" Flat Washer, " SAE

Carriage Bolt, ½"-13 x 2¼" Carriage Bolt, ½"-13 x 2½" (Used W/Straight Drop In-Furrow Granular Chemical Bracket) Flat Washer, " SAE

Closing Wheel Shield Kit W/Hardware and Instruction Closing Wheel Shield Carriage Bolt, "-16 x 1¼" Carriage Bolt, "-16 x ¾" Hex Nut, "-16

Hex Head Cap Screw, "-11 x 3½" Flat Washer, " SAE Bushing, " I.D. x " O.D. x ¼" Long Lock Washer, " Lock Nut, "-11

A GA6434 - Rubber Closing Wheel Complete W/Bearing (Items 1-3)

Rev. 8/12 P16

Hopper Support and Meter Drive

M0233-02Model 3700

(IP1209)

P17 Rev. 9/11

Hopper Support and Meter Drive

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 GA2007

G10621 G10309

2 GA10155

G10061 G11387 G10108

3 GD11239

G10602 G10567

4 G10752

G11391 G10412

5 GB0218 2 Bushing, " I.D. x " O.D. x " Long 6 GB0314 2 Hopper Mount 7 GB0331

G10620 G10338

8 GA10137

GA12143 9 GD11413 1 Spring 10 GD15747 1 Shaft 11 GB0278

G10546 12 GD17192 1 Bolt-On Sprocket, 28 Tooth 13 G11222 3 Hex Socket Button Head Cap Screw, "-18 x ½", Stainless Steel

G10620 3 Serrated Flange Nut, "-18 14 GA10137 1 Double Sprocket And Bearing, Drive Clutch, 11/19 Tooth

1 2 2 1 1 2 1 1 1 1 2 2 2

1 2 2 1 1

1 1

DESCRIPTION

Hopper Hold Down Latch Serrated Flange Nut, ¼"-20 Carriage Bolt, ¼"-20 x ", Grade 2 Hopper Support Hex Head Cap Screw, "-16 x 3½" Flat Washer, " SAE Lock Nut, "-16 Knob Spring Pin, ¼" x 1½" External Retaining Ring, " Hex Head Cap Screw, "-18 x 2¼" Flat Washer, " SAE Lock Nut, "-18

Clutch Adapter Plate Serrated Flange Nut, "-18 Carriage Bolt, "-18 x 1¼" Double Sprocket And Bearing, Drive Clutch, 11/19 Tooth (Mechanical) Double Sprocket And Bearing, Drive Clutch, 11/28 Tooth (EdgeVac)

Coupler Spring Pin, " x 1¼"

A GA12144 - Meter Drive Assembly, 11/28 Tooth (Items 3 And 8-11) (EdgeVac Shown) B GA10151 - Meter Drive Assembly Complete, 11/19 Tooth (Items 3 And 8-11)

Rev. 9/11 P18

(METR12/RU87e)

Seed Hopper and Lid

M0233-02Model 3700

ITEM PART NO. QTY. DESCRIPTION

1 GD11279 1 Lid 2 GA10634

GD12561

3 GA9714

GD12561

Rev. 6/14

P19

Seed Hopper (EdgeVac) Threaded Insert, /"-18

Seed Hopper, Reinforced (Mechanical) Threaded Insert, /"-18

This page left blank intentionally.

RUA015/RUA056/RUA057(RU13k/RU13d)

Finger Pickup Seed Meter

M0233-02Model 3700

Left Rear View Of Complete Meter

Rev. 12/12

P21

Finger Pickup Seed Meter

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 G10602 1 Spring Pin, ¼" x 1½" 2 G10604 1 Spring Pin, " x 1½" 3 GD26419 1 Housing Cover 4 GD1041 1 Belt Drive Sprocket 5 GD11286 1 Seed Belt 6 GA2019 1 Bearing 7 GA18201 1 Conveyor Housing 8 GB0110 1 Bearing Housing 9 GR1569

GR0664

GA2020

G10690 10 G10401 3 Slotted Hex Washer Head Screw, No. 10-32 x " 11 GD18704 12 Finger, Corn 12 GD19790 12 Spring 13 GB0410 1 Cam 14 GD11528 1 Finger Holder 15 G10470 1 Cotter Pin, " x 1" 16 G11009 2 Locking Thumbscrew, "-18 x ¾" 17 GD11311 1 Seed Bafﬂe 18 GD1083 1 Cover Nut 19 G10500 1 Jam Nut, "-18 UNF 20 GA8343 1 Wave Washer, " (Triple Wave) 21 G10020

G10323 22 G10022

G10621 23 G10021

G10621 24 G10603 1 Spring Pin, ¼" x 1¼" 25 GD1042 1 Idler 26 GB0120 1 Bushing, " I.D. x 1" Long 27 GD19333 12 Finger, Oil Sunﬂower 28 GD15698 1 Shank Cover, Finger Pickup Seed Meter 29 GD11787 - Half Rate Blank Finger

3 3

4 4

1 1

DESCRIPTION

Carrier Plate W/Brush And Screw (Corn) Carrier Plate W/Brush And Screw (Sunﬂower) Brush Rolling Thread Screw, No. 10 x ¾"

Hex Head Cap Screw, ¼"-20 x " Hex Flange Nut, ¼"-20, No Serrations

Hex Head Cap Screw, ¼"-20 x ½" Serrated Flange Nut, ¼"-20

Hex Head Cap Screw, ¼"-20 x 1½" Serrated Flange Nut, ¼"-20

A GR1848 - Finger Assembly, Corn (Items 11-14 And 20) B GR1897 - Finger Assembly, Oil Sunﬂower (Items 12, 14, 20, 27 And 30) C 700-01078 - Corn Meter (Items 1-26 and 28)

Rev. 6/13 P22

Brush-Type Seed Meter

M0233-02Model 3700

RUA037/RUA056/RUA057(RU14f)

¾"

Left Rear View Of Complete Meter

Used W/ Soybean And Cotton Discs

Used W/ Milo/Grain Sorghum Discs

"

P23 Rev. 9/11

Brush-Type Seed Meter

Model 3700M0233-02

ITEM PART NO. QTY.

(Per Row)

1 G11009 2 Locking Thumbscrew, "-18 x ¾" 2 GA18208

GA5698 3 GA6038

GD1755 4 G10603 1 Spring Pin, ¼" x 1¼" 5 G10602 1 Spring Pin, ¼" x 1½" 6 GD8778 1 Wear Strip 7 GA5699 1 Upper Brush 8 GD11122 1 Upper Brush Retainer (Used W/Soybean And Cotton Discs) 9 GA5834 1 Lower Brush 10 GA5794

GA6184

GA5796

GA6168

GA6478

GA6182

GA7255 11 G10531 2 Wing Nut W/Nylon Insert, ¼"-20 12 G11151

G10634 13 GD7878 1 Cover 14 GD15699 1 Shank Cover, Brush-Type Seed Meter 15 GA5982

GA6187

GA5795

GA6633 16 GD8237 - Upper Brush Retainer (Used W/Milo/Grain Sorghum Discs)

DESCRIPTION

Housing W/Bearing Bearing

Hub W/Shoulder Bolts Shoulder Bolt, ¼"-20 (2 Used)

Seed Disc, Soybean, 60 Cell, Black Color-Coded Seed Disc, Specialty Soybean, 48 Cell, Dark Blue Color-Coded Seed Disc, Cotton, Acid-Delinted, 30 Cell, White Color-Coded Seed Disc, Large Cotton, Acid-Delinted, 36 Cell, Tan Color-Coded Seed Disc, High-Rate Cotton, Acid-Delinted, 48 Cell, Light Green Color-Coded Seed Disc, Hill-Drop Cotton, Acid-Delinted, 12 Cell, Brown Color-Coded Seed Disc, Small Hill-Drop Cotton, Acid-Delinted, 12 Cell, Dark Green Color-Coded

Hex Washer Head Screw, No. 10-16 x ½" Slotted Tap Screw, No. 10-24 x " (Use As Required)

Seed Disc, Small Milo/Grain Sorghum, 30 Cell, Red Color-Coded Seed Disc, Large Milo/Grain Sorghum, 30 Cell, Light Blue Color-Coded Seed Disc, High-Rate Small Milo/Grain Sorghum, 60 Cell, Red Color-Coded Seed Disc, High-Rate Large Milo/Grain Sorghum, 60 Cell, Yellow Color-Coded

A 700-01079 - Brush Meter (Items 1-9 and 11-14)

Rev. 6/13 P24

EdgeVac Seed Meter

M0233-02Model 3700

(IP1271)

21 22

Used With 60 Cell Milo/Grain Sorghum Disc, 60 Cell Soybean Disc, 120 Cell High-Rate Soybean Disc And 39 Cell And 24 Cell Popcorn Discs

Used With 60 Cell Milo/Grain Sorghum Disc

Used With 20 Cell Hill-Drop Acid-Delinted Cotton Discs; 54 Cell Acid-Delinted Cotton/Small Dry Edible Bean Disc; And Small Cotton/Sunﬂower Disc

P25 Rev. 9/11

EdgeVac Seed Meter

Model 3700M0233-02

ITEM PART NO. QTY. DESCRIPTION

1 GA11911

GD17099

GD17152 2 GD17049

GD17048

GD14467

GD14468

GD17050

GD17187

GD18095

GD17186

GD18098

GD14477

GD24805 3 GD17028 1 Wall Brush/Vent 4 GD17021 1 Foam Spacer 5 GB0328 1 Mount 6 GA5698 1 Bearing 7 GD14541 1 Discharge Cover 8 GA11935

G11213 9 GB0319 1 Housing 10 G11009 2 Locking Thumbscrew, "-18 x ¾" 11 GD14592 1 Spring 12 GB0358

G11173 13 GD15663 1 Brush Adjustment Lever 14 GA12848 1 Singulator Brush 15 GD17162 3 Push Nut, " I.D. 16 GD17047 1 Air Inlet Screen 17 G10260 1 Hex Socket Head Cap Screw, ¼"-20 x ½" 18 G11172 4 Hex Socket Head Shoulder Screw, ¼"-20 x ", Stainless Steel 19 G10603 1 Spring Pin, ¼" x 1¼" 20 G10602 1 Spring Pin, ¼" x 1½" 21 GD17104 1 Seed Bafﬂe (Used With 60 Cell Milo/Grain Sorghum Disc, 60 Cell Soybean Disc,

22 G11210

G10323 23 GA12133 1 Cleanout Brush (Used With 60 Cell Milo/Grain Sorghum Disc) 24 GA12154 - Cleanout Brush W/Ball-Type Ejector (Used With 20 Cell Hill-Drop Acid-Delinted

25 GD15700 1 Shank Cover, EdgeVac Meter

1 1 1

1 1

Vacuum Cover W/Elbow And Cap " Hose Barb Elbow Cap

Seed Disc, Corn/Popcorn, 39 Cell, Light Blue Color-Coded Seed Disc, Low-Rate Corn/Popcorn, 24 Cell, Light Green Color-Coded Seed Disc, Soybean, 60 Cell, Black Color-Coded Seed Disc, High-Rate Soybean, 120 Cell, Dark Blue Color-Coded Seed Disc, Milo/Grain Sorghum, 60 Cell, Yellow Color-Coded Seed Disc, Hill-Drop Cotton, Acid-Delinted, 3 Seeds Per Cell, 20 Cell, Brown ColorCoded Seed Disc, Small Hill-Drop Cotton, Acid-Delinted, 20 Cell (3 Seeds Per Cell), Grey Color-Coded Seed Disc, Cotton, Acid-Delinted/Small Dry Edible Bean, 54 Cell, Dark Green ColorCoded Seed Disc, Small Cotton/Sunﬂower, 54 Cell, White Color-Coded Seed Disc, Large Dry Edible Bean, 54 Cell, Tan Color-Coded Seed Disc, Sugar Beets, 80 Cell, Blue Color-Coded

Crowder Brush Hex Socket Head Cap Screw, ¼"-20 x ¾"

Cap Hex Socket Head Cap Screw, No. 10-24 x ", Stainless Steel

120 Cell High-Rate Soybean Disc, 39 Cell And 24 Cell Popcorn Discs, and 80 Cell Sugar Beet Disc)

Rib Neck Bolt, ¼"-20 x ¾" Hex Flange Nut, ¼"-20, No Serrations

Cotton Discs And 54 Cell Acid-Delinted Cotton/Small Dry Edible Bean And Small Cotton/Sunﬂower Discs)

A G8158X - EdgeVac Meter Assembly (Includes Items 1, 3-20, 22, and 25)

Rev. 6/13 P26

(METR14d)

M0233-02Model 3700

Granular Chemical Hopper and Hopper Panel Extension

P27 Rev. 9/11

+ 254 hidden pages

Kinze 3700 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table Of Contents

Shank Assembly, Seed Tube, and Depth Adjustment

Pneumatic Down Pressure Package Option

Air Clutch, Pull Row Unit

Ag Leader Electric Clutch

15" Seed Opener Disc Blade/Bearing Assembly and Scrapers

Gauge Wheels

“V” Closing Wheels

Hopper Support and Meter Drive

Seed Hopper and Lid

Finger Pickup Seed Meter

Brush-Type Seed Meter

EdgeVac Seed Meter

Granular Chemical Hopper and Hopper Panel Extension