Kintech MB9500 User Manual

User Manual

Smart Mobile Phone

Model Name: MB9500

Brand Name: Titan

FCC ID: BRCMB9500

1 General Information

1.1 Profile

Please read this pamphlet carefully in order to make your phone in perfect
condition.
Our company may change this mobile phone without prior written notice and
reserves the final right to interpret the performance of this mobile phone.
Due to different software and network operators, display on your phone may be
different, refer to your phone for details.

1.2 Safety warning and Attentions

Safety warning

¾ ROAD SAFETY COMES FIRST

Do not use a hand-held phone while driving. Use hands-free fittings when calls
are unavoidable while driving. In some countries, dialing or receiving calls while
driving is illegal!

¾ SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in aircraft. Using a mobile phone in flight
is illegal and risky.
Please make sure that your mobile phone is powered off in flight.

¾ SWITCH OFF BEFORE ENTERING RISKY AREAS

Strictly observe the relevant laws, codes, and regulations on the use of mobile
phones in risky areas. Turn off your mobile phone before entering a place susceptible
to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting
process is under way.

¾ OBSERVE ALL SPECIAL REGULATIONS

Follow any special regulations in force in any area such as hospitals and always
switch off your phone whenever it is forbidden to use it or, when it may cause
interference or danger. Properly use your mobile phone near medical apparatuses,
such as pacemakers, hearing aids and some other electronic medical devices, as it may
cause interference to such apparatuses.

¾ INTERFERENCE

The conversation quality of any mobile phone may be affected by radio
interference. An antenna is built inside the mobile phone and located below the
microphone. Do not touch the antenna area during a conversation, lest that the
conversation quality deteriorate.

¾ QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment. Installing or
repairing the mobile phone on your own may bring great danger and violates the
warranty rules.

¾ ACCESSORIES AND BATTERIES

Use only approved accessories and batteries.

¾ USE SENSIBLY

Use only in a normal and proper manner.

¾ EMERGENCY CALLS

Ensure the phone is switched on and in service, enter the emergency number, e.g.
112, then press the Dial key. Give your location and state your situation briefly. Do
not end the call until told to do so.

Note: Just like all other mobile phones, this mobile phone does not necessarily
support all the features described in this manual due to network or radio transmission
problems. Some networks even do not support the emergency call service. Therefore,
do not rely solely on the mobile phone for critical communications such as first aid.
Please consult the local network operator.

Precautions

This mobile phone is well designed with fine art. Please exercise special care
when using it. The following suggestions will help your mobile phone survive the
warranty period and extend its service life:

¾ Keep the mobile phone and all its fittings beyond children's reach.
¾ Keep the mobile phone dry. Keep away from rain, moisture, liquid or other

substances that may corrode electronic circuits.

¾ Do not use or store the mobile phone in dusty places, lest that active parts of the

mobile phone be damaged.

¾ Do not store the mobile phone in a high-temperature place. High temperature will

shorten the life of electronic circuits and damage the battery and some plastic
parts.

¾ Do not store the mobile phone in a chilly place. Otherwise, moistures will be

formed inside the mobile phone to damage electronic circuits when the mobile
phone is moved to a constant temperature place.

¾ Do not throw, knock or shock the mobile phone, as that will destroy the internal

circuits and high-precision components of the mobile phone.

Open The Back Cover

Unlock/Lock Screen

You can right drag the unlock ring or left drag the unlock ring to the function icon to unlock the
screen and enter the corresponding function module. You can press the “power” button in any
interface to lock the screen and enter “stand-by” mode.