Kino Flo VG5R Ballast Board User Manual

VG5R Ballast Board

(Part # 6800177)

(Top View)

(Bottom View)

The VG5R ballast board is to be used as a replacement ballast board for
all VG series in the following products: Single, Double, 4Bank, Image and
Wall-O-Lite series products. For latest warranty information, see Kino Flo
website www.kinoo.com

Part No. 3120115 Rev C 11-05-2014

6350014

6350006

Shorting Plug #6350014

All Non-DMX products that use(d) VG ballast boards
must use Shorting plug part #6350014 (included with
VG5R). Remove shorting plug for all DMX products.
The DMX wiring harness is used in its place.

Shorting Plug #6350006

HO/Std shorting plug, part #6350006, (sold separate­ly), must be used on Non-HO/Std products (DMX or
Non-DMX) for proper ballast operation.In most cases,
the shorting plug may be removed from the ballast card
that is being replaced.

The following models did not have an HO/Std
setting. Therefore, need Shorting plug #6350006
to operate properly:

CFX-W48-X120, CFX-W48-X230
IMG-20X-120, IMG-20X-230
IMG-40X-120, IMG-40X-230
IMG-80X-120, IMG-80X-230

2