Kino Flo VG3R Ballast Board User Manual

VG3R Ballast Board

(Part # 6800056)

(Side View)

(Front View)

The VG3R ballast board replaces all VG series ballast boards.
The VG3R is to be used as a replacement ballast board for Single,
Double, 4Bank, Image and Wall-O-Lite series products. For latest
warranty information, see Kino Flo website at www.kinoflo.com.

Part No. 3120056 11-01-2009

Shorting Plug

HO/Std shorting plug, part # 6350006, (sold separately),
must be used on non-HO/Std products (DMX or
Non-DMX) for proper ballast operation. In most cases,
the shorting plug may be removed from the ballast card

6350006

6350014

that is being replaced.
.

Shorting plug, part # 6350014 (included) is used on all
Non-DMX products.

.

Using VG3R with or without Shorting Plugs

Use shorting plug # 6350006 (purchased separately or re-use from

replaced board) and Remove
non-HO/Std products:

CFX-W48-X120, CFX-W48-X230
IMG-20X-120, IMG-20X-230
IMG-40X-120, IMG-40X-230
IMG-80X-120, IMG-80X-230

shorting plug # 6350014 with the following

shorting plug # 6350014 (included with VG3R) with the following

Use

Non-DMX products:

BAL-105-S120, BAL-100-F230
BAL-210-S120, BAL-210-F230
BAL-410-S120, BAL-410-F230

Remove

BAL-450-120, BAL-450-230

.

IMG-45X-120, IMG-45X-230
IMG-85X-120, IMG-85X-230

shorting plug # 6350014 for the following DMX products:

2