Kino Flo SYS-S30-230U, SYS-S30-120U, SYS-S20-120U, SYS-S20-230U Operation Manual

Operation Manual

Select LED 30/20

Part No. 3100088 Rev B 10-14-2016

Select LED System Components

Select LED Systems

LED-150X-120U

Select LED 150 DMX Controller, Univ 120U

LED-150X-230U

Select LED 150 DMX Controller, Univ 230U

CFX-SL30 Select LED 30 Fixture

CFX-SL20 Select LED 20 Fixture

SYS-S30-120U Select LED 30 DMX System, Univ 120U
SYS-S30-230U Select LED 30 DMX System, Univ 230U

SYS-S20-120U Select LED 20 DMX System, Univ 120U
SYS-S20-230U Select LED 20 DMX System, Univ 230U

MTP-BC41 Kino 41K Mount w/

Baby Receiver Curve (16mm)

X12-25 Select 150 Extension, 25ft

2

Each Select LED System consists of:

1 LED Fixture
1 Mounting Plate
1 Extension Cable
1 LED Controller

Select LED 30 DMX Kits

KIT-S30B-120U

Select LED 30 DMX Kit, Univ 120U w/ Soft Case

KIT-S30B-230U

Select LED 30 DMX Kit, Univ 230U w/ Soft Case

Kit Contents: Dimensions:

1 Select LED 30 Fixture 42.5 x 7.5 x 16.5”
1 Select LED 150 DMX Controller (108 x 19 x 42cm)
1 MTP-BC41 Mount
w/ Baby Receiver Curve (16mm) Weight:
1 Extension, 25ft 26 lb
1 Soft Case (12kg)

KIT-S30-120U

Select LED 30 DMX Kit, Univ 120U w/ Flight Case

KIT-S30-230U

Select LED 30 DMX Kit, Univ 230U w/ Flight Case

Kit Contents: Dimensions:

1 Select LED 30 Fixture 46 x 11 x 16.5”
1 Select LED 150 DMX Controller (117 x 28 x 42cm)
1 MTP-BC41 Mount
w/ Baby Receiver Curve (16mm) Weight:
1 Extension, 25ft 46.5 lb
1 Flight Case (21kg)

KIT-S32-120U

Gaffer LED 30 DMX Kit, Univ 120U (2-Unit)

KIT-S32-230U

Gaffer LED 30 DMX Kit, Univ 230U (2-Unit)

Kit Contents: Dimensions:

2 Select LED 30 Fixture 43.5 x 13 x 18.5”
2 Select LED 150 DMX Controller (110.5 x 33 x 47cm)
2 MTP-BC41 Mount
w/ Baby Receiver Curve (16mm) Weight:
2 Extension, 25ft 69 lb
1 Ship Case (31kg)

Select LED 30

DMX Kit w/ Soft Case

Select LED 30

DMX Kit w/ Flight Case

Gaffer LED 30 DMX Kit

(2-Unit)

3

Select LED 20 DMX Kits

KIT-S20B-120U

Select LED 20 DMX Kit, Univ 120U w/ Soft Case

KIT-S20B-230U

Select LED 20 DMX Kit, Univ 230U w/ Soft Case

Kit Contents: Dimensions:

1 Select LED 20 Fixture 31 x 7.5 x 18”
1 Select LED 150 DMX Controller (79 x 19 x 46cm)
1 MTP-BC41 Mount
w/ Baby Receiver Curve (16mm) Weight:
1 Extension, 25ft 23 lb
1 Soft Case (10.5kg)

KIT-S20-120U

Select LED 20 DMX Kit, Univ 120U w/ Flight Case

KIT-S20-230U

Select LED 20 DMX Kit, Univ 230U w/ Flight Case

Kit Contents: Dimensions:

1 Select LED 20 Fixture 30 x 10.5 x 21”
1 Select LED 150 DMX Controller (76 x 27 x 53cm)
1 MTP-BC41 Mount
w/ Baby Receiver Curve (16mm) Weight:
1 Extension, 25ft 38 lb
1 Flight Case (17kg)

KIT-S22-120U

Interview LED 20 DMX Kit, Univ 120U (2-Unit)

KIT-S22-230U

Interview LED 20 DMX Kit, Univ 230U (2-Unit)

Kit Contents: Dimensions:

2 Select LED 20 Fixture 36 x 13 x 20.5”
2 Select LED 150 DMX Controller (91.5 x 33 x 52cm)
2 MTP-BC41 Mount
w/ Baby Receiver Curve (16mm) Weight:
2 Extension, 25ft 63.5 lb
1 Ship Case (29kg)

Select LED 20

DMX Kit w/ Soft Case

Select LED 20

DMX Kit w/ Flight Case

Interview LED 20

DMX Kit (2-Unit)

4

5

Mounting the Fixture

Align the center pin of the mounting plate to the
center hole on the mating plate.

Rotate plate clockwise until the four shoulder rivets
drop into the receptacle. A locking pin will snap into
place when the plate is properly seated.

The yellow wire loop provides an attachment point
for a safety chain.

To remove the plate, pull up on the locking pin and
reverse the mounting procedure.

A 180° turn loosens the orientation of the mount.
A right turn tightens the mount.

The tension on the lock lever may be adjusted by
pulling the handle away from the mount.

This disengages the handle from the screw
mechanism and allows the lever to be reoriented.

Lollipops are interchangeable.

MTP-L Kino 41 Lollipop w/ 3/8” Pin (10mm)
MTP-LBC Kino 41 Lollipop w/ Baby Rcvr Curve

(16mm)
MTP-LBS Kino 41 Lollipop w/ Baby Rcvr Short
(16mm)

Mounting the Controller

Extension Cable

Insert the 4 rubber feet of the controller into the

4 holes in the xture.

Secure the Controller to the xture with the Velcro

fastening strap.

Connect the harness to the Controller. Align the
key ways on the harness connector with the circular
receptacle on the ballast. Rotate the silver locking
ring until it clicks into the lock position.

The Select LED xture can be used with the
controller directly attached or remotely, using a
25ft extension cable. Remote operation of the
controller provides more rigging options.

To insert the cable, align the key ways on the
extension cable with the circular receptacle on the
controller. Rotate the silver locking ring until it clicks
into the lock position.

Mount Options

The Controller can be
mounted to a stand with a
ballast mount accessory,
MTP-BAL and mafer clamp.

6

MTP-BAL

7

Power

DC Input

The Select LED 150 DMX can also be operated on 24VDC (input range 18-36VDC)

through a 3-Pin XLR. The pin polarity is:

Pin # 1 – Ground

Pin # 2 + 18-36VDC

Pin # 3 not used

AC Input

The Select LED 150 DMX Controller is
powered AC and includes an IEC
connection. It also includes a 12ft
power cord with a locking IEC connector.

The Select LED 150 DMX Controller has
a built-in power supply with universal

input from 100-240VAC.

Ambient Operating Temperature

The Select LED 150 DMX is designed
to operate at temperatures from 14°F to
104°F (-10°C to 40°C).

Note:

A low voltage warning will display

if input DC voltage is under 18VDC.

Photo example: LOW VDC: 17

8

Control Panel - White Mode

A

B

C

D E F G H

A) On /Off: On = Green light displayed. Off = Red light displayed. The display and
all menu settings can be operated while the power button is in the Off position,
as long as power is applied to the controller. The On /Off button only controls the
light source.

B) Menu: Provides access to menu options such as General settings, Reset, DMX and
DMX Wireless settings. Tip: While on control screen, press and hold for 3 seconds to
switch to Color mode.

C) Kelvin & G/M (Green/Magenta) Preset Buttons: Factory defaults left to right are:
2700K, 3200K, 5000K and 6500K. G/M default value is 000. User can also use
these preset buttons to store custom Kelvin and G/M settings.

D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel.
Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.

E) Lock: Press the Lock button to disable all buttons and control knob.
Press for 3 seconds to restore presets to default factory settings.

F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in sub-menus,
pressing Mode always returns you to main display. When DMX is applied, use Mode
to access DMX channel on main display. Tip: Long press will bring you back one step.

G) Data Port: Mini B USB for software updates.

H) Dimmer Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX address.

Press the knob to toggle between ne and coarse adjustments or when selecting
options within menus.

DMX Note: Each Select LED 150 DMX Controller has an “AUTO TERMINATE” feature.
The last xture that does not have an XLR cable attached to the DMX “Out” port will
automatically terminate.