Kino Flo ParaBeam 410 DMX, ParaBeam210 DMX Operation Manual

ParaBeam 410 & 210 DMX

Operation Manual

Part No. 3100064 Rev A 05-10-2012

®

ParaBeam 410 Center Mount

ParaBeam 410 Pole-Op

ParaBeam Fixture Styles and Features

ParaBeam Center Mount

ParaBeam Pole-Op

ParaBeam Yoke Mount

PAR-410-120

ParaBeam 410 DMX Center Mount, 120VAC

PAR-410-230

ParaBeam 410 DMX Center Mount, 230VAC

PAR-410P-120

ParaBeam 410 DMX Pole-Op, 120VAC

PAR-410P-230

ParaBeam 410 DMX Pole-Op, 230VAC

PAR-410Y-120

ParaBeam 410 DMX Yoke Mount, 120VAC

PAR-410Y-230

ParaBeam 410 DMX Yoke Mount, 230VAC

PAR-210-120

ParaBeam 210 DMX Center Mount, 120VAC

PAR-210-230

ParaBeam 210 DMX Center Mount, 230VAC

PAR-210P-120

ParaBeam 210 DMX Pole-Op, 120VAC

PAR-210P-230

ParaBeam 210 DMX Pole-Op, 230VAC

PAR-210Y-120

ParaBeam 210 DMX Yoke Mount, 120VAC

PAR-210Y-230

ParaBeam 210 DMX Yoke Mount, 230VAC

2

Included w/ all ParaBeam Models

GFR-P4

ParaBeam 410 Gel Frame (Included)

GFR-P2

ParaBeam 210 Gel Frame (Included)

LVR-P4-S

ParaBeam 410 Silver Louver (Included)

LVR-P2-S

ParaBeam 210 Silver Louver (Included)

3

True Match Lamps

55C-K32 55W Kino KF32 Compact

55C-K55 55W Kino KF55 Compact

®

4

ParaBeam Center Mount Kits

KIT-P4-120

ParaBeam 410 DMX Center Kit, 120VAC

KIT-P4-230

ParaBeam 410 DMX Center Kit, 230VAC

Kit Contents

1 ParaBeam 410 DMX Center Mount
1 Lamp Case
1 Ship Case

Dimensions Weight

29.5 x 11 x 29.5” 61 lb
(75 x 28 x 75cm) (27.5kg)

KIT-P2-120

ParaBeam 210 DMX Center Kit, 120VAC

KIT-P2-230

ParaBeam 210 DMX Center Kit, 230VAC

Kit Contents

1 ParaBeam 210 DMX Center Mount
1 Lamp Case
1 Ship Case

Dimensions Weight

21.5 x 11.5 x 29” 45 lb
(54.6 x 29.2 x 73.6cm) (20.3kg)

5

Inserting Gel Frame

Inserting Lamps

Open hinged reector door.

Snap lamp pins into
lamp holder.

Silver louver or honeycomb
louver ts into front
channel.

Insert lamp end rst.

Push tab down and forward

to lock into open position.

Insert gel frame into
channel closest to lamps.

Close reector door.

To release lamps,
press Red button and

lift lamp out.

All 4 retaining tabs must
be extended to lock
accessories in place.

6

ParaBeam Center Mount

The ParaBeam 410 Center Mount includes a lollipop w/ Junior Pin (MTP-LM) and can

hang from a grid by a Junior pipe hanger or mount onto a Junior stand.

Note: Loop the safety chain through the handle on the ParaBeam 410.

The ParaBeam 210 Center Mount includes a lollipop w/ Baby Receiver (MTP-LB) and

can hang from a grid by a baby pipe hanger or mount onto a baby stand.

A 180 degree turn is all that is required to loosen the mount for orientation.

To adjust the tension on the lock lever, pull handle away from mount. This disengages the
handle from the screw mechanism and allows the lever to be reoriented. You can also use

a screwdriver to adjust the tension. Pull back on handle and adjust screw.