Kino Flo FreeStyle 4 Quick Start Manual

Quick Start Guide

FreeStyle 4 LED

Part No. 3100117 Rev A 11-05-2018

LED-140X

CFX-F484

FS-48

FreeStyle 4 System Components

LED-140X-120U

FreeStyle 140 LED DMX Controller, Univ 120U

LED-140X-230U

FreeStyle 140 LED DMX Controller, Univ 230U

CFX-F484 FreeStyle T44 Fixture

MTP-KG41 KinoGrip 41K Mount w/ 3/8” Pin

(10mm)

X12-25 FreeStyle Extension, 25ft

2

FreeStyle 4 System

SYS-F484U

FreeStyle T44 LED DMX System, Univ

FreeStyle 4 LED System consists of:

1 FreeStyle 4 Fixture
1 Mounting Plate
1 Extension Cable
1 LED Controller
4 FreeStyle 4ft LED Tubes

FS-48 FreeStyle 4ft LED Tube

3

Power

DC Input

The FreeStyle 140 LED DMX can also
be operated on 24VDC (input range
18-36VDC) through a 3-Pin XLR.
The pin polarity is:

Pin # 1 – Ground
Pin # 2 + 18-36VDC

Pin # 3 not used

AC Input

The FreeStyle 140 LED DMX
Controller is powered AC and includes
an IEC connection. It also includes a
12ft power cord with a locking IEC
connector.

The FreeStyle 140 LED DMX has a
built-in power supply with universal
input from 100-240VAC.

Ambient Operating Temperature

The FreeStyle 140 LED DMX is designed
to operate at temperatures from
14°F to 104°F (-10°C to 40°C).

Note:

A low voltage warning will display
if input DC voltage is under 18VDC.
Photo example: LOW VDC: 16

FreeStyle Fixture Assembly

4

Rotate the ¼ turn fastener
clockwise to release harness.

To Release the Tube Harness

Remove the harness from
the Velcro located under the
relector.

The FreeStyle T44 ixture is
comprised of a Louver,
Relector and Tube Harness.

The Louver and Relector
are held in place with Velcro
fasteners. The Tube Harness
is secured by means of a
¼ turn fastener and Velcro.