Kino Flo Diva-Lite 21 User Manual

Operation Manual

Diva-Lite 41, 31, 21 LED

Part No. 3100112 Rev A 05-17-2018

Diva-Lite LED DMX Systems

DIV-L21XCU Diva-Lite 21 LED DMX Center, Univ

DIV-L31XCU Diva-Lite 31 LED DMX Center, Univ

DIV-L41XCU Diva-Lite 41 LED DMX Center, Univ

Center Mount

DIV-L21XYU Diva-Lite 21 LED DMX Yoke, Univ

DIV-L31XYU Diva-Lite 31 LED DMX Yoke, Univ

DIV-L41XYU Diva-Lite 41 LED DMX Yoke, Univ

Yoke Mount

Included w/ all Diva-Lite Models

LVR-SL290-P Diva-Lite 21 Louver/HP, 90°

LVR-SL390-P Diva-Lite 31 Louver/HP, 90°

LVR-SL490-P Diva-Lite 41 Louver/HP, 90°

Included w/ all Diva-Lite Center Mount Only

MTP-LBC Kino 41 Lollipop w/ Baby Receiver Curve

(16mm)

Included w/ all Diva-Lite Yoke Mount Only

7010055 Diva-Lite 21 Yoke Assembly

7010057 Diva-Lite 31 Yoke Assembly

7010059 Diva-Lite 41 Yoke Assembly

2

Diva-Lite 31 LED DMX Kits

KIT-DL31XU

Diva-Lite 31 LED DMX Kit w/ Travel Case, Univ

Kit Contents:

1 Diva-Lite 31 LED DMX Center
1 Travel Case

Diva-Lite 31 LED DMX Kit

w/ Travel Case

Dimensions: Weight:

45.5 x 9 x 16.5” 33.5 lb
(116 x 23 x 42cm) (15kg)

Diva-Lite 21 LED DMX Kits

KIT-DL21XU

Diva-Lite 21 LED DMX Kit w/ Travel Case, Univ

Kit Contents:

1 Diva-Lite 21 LED DMX Center
1 Travel Case

Diva-Lite 21 LED DMX Kit

w/ Travel Case

Dimensions: Weight:

28.5 x 8.5 x 16” 22.5 lb
(72.5 x 22 x 41cm) (10kg)

3

Power

AC Input

The Diva-Lite LED is powered AC
and includes an IEC connection. It
also includes a 12ft power cord with
a locking IEC connector.

It includes a built-in power supply
with universal input from
100-240VAC.

Ambient Operating Temperature

The Diva-Lite LED is designed to
operate at temperatures from
14°F to 104°F (-10°C to 40°C).

DC Input

The Diva-Lite LED can also be operated on 24VDC (input range 18-36VDC)
through a 3-Pin XLR. The pin polarity is:

Pin # 1 – Ground
Pin # 2 + 18-36VDC

Pin # 3 not used

Note:

A low voltage warning will display
if input DC voltage is under 18VDC.
Photo example: LOW VDC: 16

4

Mounting Procedures

Mounted on a baby
stand.

Mounted to pipe grid.

Note: When hanging in a
studio, loop a safety cord
through the metal ring
provided on the back of
the ixture.

Turn the knob to loosen or tighten the
mount.

Lollipops are interchangeable.

MTP-L Kino 41 Lollipop w/ 3/8” Pin (10mm)
MTP-LBC Kino 41 Lollipop w/ Baby Rcvr Curve (16mm)
MTP-LBS Kino 41 Lollipop w/ Baby Rcvr Short (16mm)

5