Kino Flo DG4 B User Manual

DG4 Ballast Board

(Part #6800131)

(Side View)

(Front View)

The DG4 ballast board replaces all DG series ballast boards.
The DG4 is to be used as a replacement ballast board for the Foto-Flo 400.
It is also backwards compatible with the DG2 and DG3 used in the Foto-Flo
400/200, Foto-Flo 44, Image 82/42 and Wall-O-Lite series products.
For latest warranty information, see Kino Flo website at www.kinoflo.com.

Part No. 3120072 07-28-2010

Ballast Board Removal Ballast Board Installation

Foto-Flo 400 Ballast (BAL-422-120)
is shown for illustration purposes.

1) Remove eight (8) cover screws.

2) Remove AC input and lamp
output connector.

4) Install new ballast board and
three (3) nuts.

5) Install AC input and lamp output
connector.

3) Remove three (3) nuts on each
board and remove ballast board.

6) Install eight (8) cover screws.

2