Kino Flo Celeb 250, Celeb 450, Celeb 450Q Operation Manual
Operation Manual
Part No. 3100105 Rev B 09-15-2017
Celeb 250/450/450Q LED DMX
2
Celeb LED DMX Systems
Included w/ all Celeb Models
CEL-250CU Celeb 250 LED DMX Center, Univ
CEL-450CU Celeb 450 LED DMX Center, Univ
CEL-250YU Celeb 250 LED DMX Yoke, Univ
CEL-450YU Celeb 450 LED DMX Yoke, Univ
CEL-450QU Celeb 450Q LED DMX Yoke, Univ
CEL-250PU Celeb 250 LED DMX Pole-Op, Univ
CEL-450PU Celeb 450 LED DMX Pole-Op, Univ
CEL-450QPU Celeb 450Q LED DMX Pole-Op Univ
LVR-CE290-P Celeb 250 Louver/HP, 90°
LVR-CE490-P Celeb 450 Louver/HP, 90°
LVR-CE490-QP Celeb 450Q Louver/HP, 90°
Center Mount
Yoke Mount
Pole-Op
Celeb 250 LED DMX Kits
KIT-C250U
Celeb 250 LED DMX Center Mount Kit, Univ
Kit Contents:
1 Celeb 250 LED DMX Center Mount
1 Flight Case
Weight: 31 lb (14kg)
Dimensions: 29 x 10.5 x 17” (74 x 27 x 43cm)
KIT-C250YU
Celeb 250 LED DMX Yoke Mount Kit, Univ
Kit Contents:
1 Celeb 250 LED DMX Yoke Mount
1 Jr. Pin
1 Ship Case
Weight: 40 lb (18kg)
Dimensions: 32.5 x 8.5 x 24” (83 x 22 x 61cm)
3
Celeb 250 LED
DMX Center Kit
Celeb 250 LED
DMX Yoke Kit
Celeb 450 LED DMX Kits
Celeb 450Q LED DMX Kit
KIT-C450U
Celeb 450 LED DMX Center Mount Kit, Univ
Kit Contents:
1 Celeb 450 LED DMX Center Mount
1 Flight Case
Weight: 52.5 lb (24kg)
Dimensions: 53.5 x 11 x 16.5” (136 x 28 x 42cm)
KIT-C450QU
Celeb 450Q LED DMX Yoke Mount Kit, Univ
Kit Contents:
1 Celeb 450Q LED DMX Yoke Mount
1 Jr. Pin
1 Ship Case
Weight: 52 lb (24kg)
Dimensions: 34.5 x 8.5 x 33” (88 x 22 x 84cm)
KIT-C450YU
Celeb 450 LED DMX Yoke Mount Kit, Univ
Kit Contents:
1 Celeb 450 LED DMX Yoke Mount
1 Jr. Pin
1 Ship Case
Weight: 57 lb (26kg)
Dimensions: 54.5 x 9.5 x 25” (138.5 x 24 x 63.5cm)
4
Celeb 450 LED
DMX Center Kit
Celeb 450 LED
DMX Yoke Kit
Celeb 450Q LED
DMX Yoke Kit
Center Mount
The Celeb 250 Center Mount fixture includes a Lollipop w/ Baby Receiver (16mm)
(MTP-LBC) which allows the xture to be mounted directly onto a baby stand or hung
from a grid with a baby pipe clamp.
Note: The handles on the back of the xture provide an attachment point for a safety
chain.
The Celeb 450 Center Mount xture includes a Lollipop w/ Junior Pin (28mm)
(MTP-LM) which allows the xture to be mounted directly onto a junior stand or hung
from a grid with a junior pipe clamp.
A 180° turn loosens the orientation of the mount. A right turn tightens the mount.
The tension on the lock lever may be adjusted by pulling the handle away from the
mount. This disengages the handle from the screw mechanism and allows the lever
to be reoriented. You can also use a screwdriver to adjust the tension. Pull back on
handle and adjust screw.
MTP-LBC
MTP-LM Mounted to pipe grid
Mounted on a baby stand Mounted to pipe grid
Turn the knob to loosen or tighten the orientation of the
mount.
5
Yoke Mount
MTP-I40
MTP-I80
Baby Offset Arm
The Kino Offset w/ Baby Receiver (MTP-B41F) allows the Celeb 250 Center Mount to
mount on the center of a stand or it can also be under slung from a baby stand to use
as an up light. It cannot be used with the Celeb 450 due to weight capacity.
MTP-B41F Kino Offset w/
Baby Receiver (16mm)
The yoke has a ½” hole to accept industry standard mounting hardware.
The Celeb 250 Yoke Mount xture can hang from a grid by a baby pipe hanger using
a Baby Receiver Assembly for Yoke (MTP-I40), sold separately or a junior pipe hanger
using a Junior Pin Assembly for Yoke (MTP-I80), also sold separately. The Celeb 450
Yoke Mount and Celeb 450Q Yoke Mount can also hang by a junior pipe hanger with
the MTP-I80.
Warning: Use only M5 X 10mm screws (supplied) to assemble yoke.
Note that threads on the xture are self-locking and may seem tight.
Replacement screws: Part No. 2020127
Recommended torque setting:
USA: 18 lb-in
Metric: 2 Nm
6
Loading...