Kino Flo CEL-201Y-120U, CEL-201C-120U User manual

Operation Manual

®

Celeb 201 DMX LED

Part No. 3100084 Rev 01 07-01-2015

Celeb 201 DMX LED System

Celeb 201 Center Mount

Celeb 201 Yoke Mount

Celeb 201 Pole-Op

CEL-201C-120U

Celeb 201 DMX Center Mount, Univ 120U

CEL-201C-230U

Celeb 201 DMX Center Mount, Univ 230U

CEL-201Y-120U

Celeb 201 DMX Yoke Mount, Univ 120U

CEL-201Y-230U

Celeb 201 DMX Yoke Mount, Univ 230U

CEL-201P-120U

Celeb 201 DMX Pole-Op, Univ 120U

CEL-201P-230U

Celeb 201 DMX Pole-Op, Univ 230U

Included w/ all Celeb 201 Models

LVR-CE290-P

Celeb 201 Louver/HP 90° (Included)

GFR-CE2

Celeb 201 Gel Frame (Included)

2

Celeb 201 DMX LED Kit

KIT-C201-120U

Celeb 201 DMX Center Mount Kit, Univ 120U

KIT-C201-230U

Celeb 201 DMX Center Mount Kit, Univ 230U

Kit Contents:

1 Celeb 201 DMX Center Mount
1 Flight Case

Weight: 31 lb (14kg)
Dimensions: 29 x 10.5 x 17” (74 x 27 x 43cm)

Celeb 201 DMX Control Panel

F

A B C D

A) Kelvin Preset Buttons: Kelvin buttons come preset at the factory. Factory defaults
left to right are: 2700K, 3200K, 4500K, 5500K, 6500K. User can also use these
preset buttons to store custom Kelvin settings.

E

G

B) DMX ADDRESS – Use to set DMX address. The Celeb 201 automatically assigns
2 channels. First Channel controls Dimming; Second Channel controls Kelvin.

C) KELVIN / DIM: In KELVIN mode, an amber light appears to the left of the button
and Kelvin is displayed. Press the button again to change to DIM mode. In DIM
mode, a green light will appear to the left of the button and Dim level is displayed.

D) Display: Provides Kelvin, Dim level and software revision data.

E) LOCK / RESET: In LOCK mode, an amber light is displayed to the left of the

button. In RESET mode, the indicator light is green. To reset to factory presets,
hold the LOCK / RESET button for 5 seconds.

F) On / Off: On = Green light displayed. Off = Amber light displayed.

G) Kelvin / Dimmer Knob: Manually adjusts Kelvin or Dim levels. Press the knob to

toggle between ne and coarse adjustments.

Note: Each Celeb 201 DMX xture has an “AUTO TERMINATE” feature. The last
xture that does not have an XLR cable attached to the DMX “Out” port will

automatically terminate.

3

Fixture Power

AC Input

The Celeb is powered AC and includes an IEC connection. A locking power cord is

included with the xture. To remove the plug, move the red tab to release. The xture

has a built-in power supply with universal input from 100-240VAC.

Note: When operating AC, attach the Velcro strap around the baby receiver lollipop as

a strain relief. The handles also provide an attachment point for a safety chain if xture

is hung from a grid.

DC Input

The Celeb can also be operated on 24VDC (input range 18-28VDC) through a 3-Pin
XLR. The Celeb will run approximately 2 hours on a 320W/24V/13A battery belt. A low
voltage warning will display “LPWR” when the battery is running low.

The pin polarity is:

Pin #1 – Ground
Pin #2 + 18-28VDC

Pin #3 not used

Ambient Operating Temperature

The Celeb is designed to operate at temperatures from 14°F to 104°F
(-10°C to 40°C).

4

Start Up

When power is rst applied to
the xture, the alphanumeric

display shows the current
software version.

Press the On/Off button
to turn on the xture.
The display will show its last
setting.

Kelvin Selection

There are 5 Kelvin factory
preset buttons. Left to right
they display 2700K, 3200K,
4500K, 5500K and 6500K.

A green indicator will light to
the left of the active button.

Rotating the adjustment knob
will change the Kelvin.

Press the rotating knob once
to shift the Kelvin prole from
Coarse to Fine increments.

In the Coarse mode,
the xture can be adjusted in
one rotation of the knob.
In Fine mode, it will require
8 rotations for full range of
adjustment.

5

Kelvin Custom Settings

In KELVIN mode, the Kelvin

can be ne tuned with the

adjustment knob to custom
settings between 2700K to
6500K.

The setting can be assigned
to any preset button by
holding down the desired
button for 5 seconds.

The Kelvin display will ash

once the setting is registered.

Note: When the power is
turned off or removed,
the xture will remember
its last setting.

Dimming

Press the KELVIN / DIM
button. The indicator light to
the left of the button will turn
green.

Rotating the adjustment knob

will dim the light of the xture.

Press the rotating knob once
to shift the Dim prole from
Coarse to Fine increments.

In the Coarse mode, the
xture can be adjusted in
one rotation of the knob.
In Fine mode, it will require
8 rotations for full range of
adjustment.

6