Kino Flo BR1 Ballast Boards User Manual

BR1 Ballast Board

(Part # 6800501)

The BR1 Ballast Board is to be used as a replacement ballast board for
the BarFly Series, model #’s BAR-450, BAR-400D & BAR-200D. For
latest warranty information, see Kino Flo website at www.kinoo.com

(Note: The BR1 ballast board has conformal coating seal, surface
mounted components. No serviceable parts available. Please contact
Dealer for service.)

Part No. 3120100 10-25-2013

Ballast Board Removal & Installation

1) Remove ten (10) cover screws.

2) Remove AC input connector.

3) Remove lamp output connector.

5) Remove three (3) ballast board screws.

6) Remove board and install new ballast
board and three (3) screws.

7) Install lamp output connector.

4) Remove DMX control connector.

2

8) Install DMX control connector.