Kino Flo BarFly 450 DMX User Manual

Operation Manual

BarFly 450 DMX

®

Part No. 3100062 Rev A 8-20-2013

BarFly 450 DMX System

®

BAR-450-120U BarFly 450 DMX, Univ 120U

BAR-450-230U BarFly 450 DMX, Univ 230U

GFR-B4 BarFly 450 Gel Frame (Included)

LVR-B490 BarFly 450 Louver-Honeycomb,

90° (Included)

MTP-BL41 Kino 41L Mount w/
Baby Receiver (16mm)

True Match Lamps

55Q-K32 55W Kino KF32 Quad

55Q-K55 55W Kino KF55 Quad

®

2

BarFly 450 DMX Kit

KIT-B450-120U

BarFly 450 DMX Kit, Univ 120U
(1-Unit)

KIT-B450-230U

BarFly 450 DMX Kit, Univ 230U
(1-Unit)

BarFly 450 DMX Kit

(1-Unit)

Kit Contents:

1 BarFly 450 DMX
1 Mount
1 Medium Duty Stand, 30”
1 Lamp Case
1 Travel Case

Dimensions: Weight:

31.5 x 9 x 22” 32 lb
(80 x 23 x 56cm) (14.5kg)

3

Inserting Lamps

Insert lamps at a 45° angle and align pins with
lamp holder.

Gently lay lamp down into xture.

Caution! If there is any resistance, realign the
angle of the lamp and try again.

Press lamp securely into lamp clip.

Applying Gel to Gel Frame

Apply adhesive transfer tape to the gel frame.

Lay the adhesive side on the gel and trim off
excess gel with a matte knife.

4

Inserting Louvers & Gel Frames

Rotate accessory locking tab counter clockwise
to open accessory holder.

Gel frame ts into lower accessory channel.

The louver slides into the upper accessory
channel.

Rotate locking tab clockwise to lock accessories

in place (both ends of xture).

5