Kino Flo BAL-410 User Manual

Operation Manual

Flathead 80 System

Part No. 3100006 Rev B 01-07-2008

CFX-4808

Flathead 80 Fixture

MTP-K81

Mounting plate

X16-25

4Bank Extension, 25ft (x2)

X16-12

4Bank Extension, 12ft (x2)

BAL-410-S120

Select 4Bank Ballast, 120VAC (x2)

BAL-410-F230

Select 4Bank Ballast, 230VAC (x2)

2

KIT-F80-1/S120
Flathead 80 Select Kit, 120VAC

KIT-F80-1/F230
Flathead 80 Select Kit, 230VAC

Kit Contents:

1 Flathead 80 Fixture
1 MTP-K81 Mount w/ Junior Pin (28mm)
2 4Bank Select Ballast
2 Extension 25ft
1 Ship Case

Dimensions

54 x 10 x 29”
(137 x 25.5 x 73.5cm)

Weight
88 lb (39.6kg)

KIT-F80-2/S120
Flathead 80 Select Kit, 120VAC (2-Unit)

KIT-F80-2/F230
Flathead 80 Select Kit, 230VAC (2-Unit)

Kit Contents:

2 Flathead 80 Fixture
2 MTP-K81 Mount w/ Junior Pin (28mm)
4 4Bank Select Ballast
4 Extension 25ft
1 Ship Case

Dimensions

54 x 15 x 34.5”
(137 x 38 x 87.5cm)

Weight
160 lb (72kg)

3

Insert lamps into both lamp holders. Twist ¼ turn to make
electrical contact.

The gel frame is secured to the fixture by 4 spring-loaded pins. Align the
pins of the gel frame with the oval receptacle holes on the edge of the
fixture. Pull back the pins and release into the receptacles to properly
secure the gel frame.

(A) (B)

A) The Gel Frame comes with

Gel Clips. Cut the gel to size and
use the Clips to fasten the gel to
the Frame.

B) Another method is to apply
transfer tape directly to the gel
frame. The clips are not
necessary when taping the gel.

4