King Tony 44504MP Safety Instructions And Operation Manual
No.44504MP
DC 19.2V
Cordless Impact Wrench
No.44504MP
DC 19.2V
Cordless Impact Wrench
FUNCTIONAL DESCRIPTION
1.Cordless Impact Wrench
1. Cordless Impact Wrench
Model 38411-310
Voltage DC 19.2V
Un Loaded Speed(rpm) 0~2500
Chuck 1/2"(13mm)Square Drive
1 2
Body
Pilot Lamp
Body
Cord
Battery Installation Hole
Terminal Hole
Release Buttons
Shaft
Battery
Handle
Forward / Reverse Lever
Auxiliary Handle
Switch Trigger
Carbon Brush
2.Battery Charger & Battery
NAME OF PARTS
Dimension L*W*H(mm/inches) 261 x 78 x 270 / 10.3 x 3.1 x 10.6
N-m 310Max Torque
In-Ib 2742
Weight (With Battery) 3100g
2. Charger
Model 38411P01
Input Voltage AC230V
Output Voltage 24V
Approval CE
Charging Time 2.0Ah Ni-Cd/60min
3. Battery Pack
Model 38411P02
Voltage 19.2V
Capacity Cell Type 2.0Ah Ni-Cd
4. Auxiliary Handle
model 38411P03
SAFETY INSTRUCTIONS
Charging Instructions
1. Use only charger supplied.
2. Do not operate battery charger with damaged cord or plug - replace them immediately.
3. Charging temperature: 0°C ~40°C.
4. NEVER connect two batteries chargers together.
5. NEVER use a booster transformer when charging.
6. NEVER use an engine generator or DC power to charge.
7. Never disassemble the battery and charger.
8. Never insert any objects into the battery charger’s air vents.
Electric shock or damage to the battery charger may result.
9. ALWAYS operate charger on standard household electrical power (230 volts).
10. Do not repeat charges battery pack as its remaining power is still available. Otherwise,
battery pack will have memory effect that might result in reducing charging capacity.
11. An extension cord should not be used for charger.
12. To reduce risk of electric shock, please unplug charger before attempting
any maintenance or cleaning.
13. Please wait one-hour first before charging, if the battery pack is stored under 0°C (32°F).
Storage Care
1.Do not expose battery charger to rain or snow and charge outdoors.
2.Storage temperature : -20°C ~40°C.
3.Keep unused battery away from other metal objects and fire.
4.Keep children away from impact wrench and accessories.
Tool Use And Care
1. Keep your work area clean and well lit.
2. Disconnect battery pack from tool or place the switch-off position before making any
adjustments, changing accessories, or storing the tools.
3. Keep all sockets/screws, bolts and covers tightly in place.
4. Do not operate power tools in explosive atmospheres.
SPECIFICATIONS
SAFETY INSTRUCTIONS AND OPERATION MANUAL
LED Light
OPERATION
3 4
No.44504MP
DC 19.2V
Cordless Impact Wrench
No.44504MP
DC 19.2V
Cordless Impact Wrench
5. Never touch moving parts.
6. Be sure switch is off position before inserting battery.
7. Always wear eye protection.
8. If the cordless impact wrench overheat ( continuous use more than 15 min),
it will stop working before cold.
9. Do not touch the bit, drill, or the work-piece immediately after operation.
ASSEMBLING
○
Install The Battery.
○
Remove The Battery.
Slide
Slide
CHARGING METHOD
1. Insert the plug of battery charger into the receptacle and pilot lamp will blink in red.
Rechargeable Battery
Battery Installation Hole
Pilot Lamp
THE INDICATORS OF THE CHARGER
Handle
Press
Release Button
2. Switch Direction & Off
CAUTION:
The push button can not be switched while the impact wrench is turning.
To switch the push button, stop the impact wrench, then set the push button.
NOTE: A buzzing noise is produced when the motor is about to rotate;
this is only a noise, not a machine failure.
3. Hand Grip Usage
customer service e-mail: service-clients@kingtony.eu
http://www.kingtony.eu
210x594 mm 8944504KTBE
1.Install The Socket
Pushbutton
Push(L)
Push(R)
CCW
CW
Off
(Middle)
REPLACING CARBON BRUSHES
Limit Mark
Brush Hold
Remove and check the carbon brushed regularly. Replace both carbon brushes when they
wear down to the limit mark.
●
RED
Fast Charging
Steady
Battery Full
●
GREEN
Flash
High Temperature Pause
Battery Low Volt
Loading...