King Technology SPA FROG FOR USE IN FILTER CORE User Manual

SPA FROG
®
MINERAL SPA CARE
For Use in Filter Core
— INSTRUCTIONS —
Installing SPA FROG
®
1. Set reminder dial on SPA FROG®to 4 months from month of installation. Turn dial by hand or with a coin if needed.
2. Place SPA FROG®in one of the following locations in spa:
a) Majority of Spas - Insert SPA FROG®inside filter cartridge core (Diagram A). Do not allow SPA FROG®to sit too low in the filter. If blocking water flow install in filter well (Diagram B). If SPA FROG®is inside a standpipe, attach a string to the FROG®head handle for easy removal.
b) High Flow Spas - On skimmer filters with 2.5 HP or larger pump motors, place SPA FROG®in filter well outside the filter cartridge (Diagram B).
c) Small Cartridge or Other Spas- Place SPA FROG®in skimmer tray (Diagram C).
Specifications
• Fits in most filters.
• Handles up to a 600 gallon spa.
• Lasts 4 months.
• Easy to set reminder dial for product replacement.
• Use bromine or chlorine and ozone if desired.
Spa Start Up
• Always drain & refill spa at least every 4 months.
• Clean or replace filter cartridge when dirty
(Follow manufac­turers’ instructions)
.
• Balance water according to the chart.
• Shock spa to establish a bromine or chlo­rine residual.
(
Follow manufacturers’ directions
.)
WATER BALANCE GUIDELINES
pH: 7.2 – 7.8 Total Alkalinity: 80 - 180 Calcium Hardness: 150-400 Total Dissolved Solids: <1500 Free Chlorine: 1.0 - 2.0 ppm Free Bromine: 1.0 - 2.0 ppm
Diagram A Diagram CDiagram B -
High Flow Spas In Filter Well
Vertical
I
Horizontal
I
–STANDPIPE
skimmer tray
If unit is too tall, cut rod at hash marks to shorten.
Regular Spa Care
1. Run filtration system a mini­mum of four hours per day.
2. Regularly test water for pH, total alkalinity and chlorine or bromine levels.
3. Maintain at least 1.0 ppm chlorine or bromine level at all times.
4. Shock the spa once a week or as needed. Additional shock­ing may be required if the spa is under heavy use. This is often the case when the spa is new.
5. Remember to replace SPA FROG®every 4 months or when draining and refilling spa.
KING TECHNOLOGY, Inc.
530 11th Avenue South • Hopkins, MN 55343
952-933-6118 • FAX 952-933-2206 • www.kingtechnology.com
Covered by one or more of the following U.S. Patent Numbers: D411,282; D422,678; 6,190,547; 6,383,507; 6,551,609; 6,652,871 and other U.S. and Foreign Patents Pending #20-48-0140 553060643R3N EPA Est. No. 071209-AZ-001
Loading...