Page 1
ASSEMBLY INSTRUCTION
1 PC
A B C D
E
146W HOME BAR WINE CABINET
Shelf Frame Glass
Key
(In the Wine Cabinet)
Shelf Pin
Ø5mm x 15mm
(In the Wine Cabinet)
1 PC 1 PC 1 SET
4 PCS
Wine Cabinet
1
This page lists all the contents
included in the box. Please take
the time to identify the hardware
as well as the individual
components to this product.
As you unpack and prepare for
assembly, place the contents on
a carpeted or padded area to
protect them from damage.
F
Anti-Tipping Kit
1 SET
Page 2
1
2
Open the other door of Wine Cabinet (A). Insert Shelf Pin (E) into
pre-drilled holes of Wine Cabinet (A) and place Shelf Frame (B) to Wine
Cabinet (A). Then place Glass (C) onto Shelf Frame (B).
2
Open the door of Wine Cabinet (A) and take out Key (D) & Shelf Pin (E) (in
the plastic bag) from the inside of the door.
A
B
C
E
D
E
A
C
B
Page 3
3
Close and lock both doors of Wine Cabinet (A) using Key (D). Stand the
Home Bar Wine Cabinet up on an even surface and check that it is balanced.
If there is a slight wobble, please adjust the levelers.
3
A
D
A
D
Page 4
4
4
Attach Anti-Tipping Kit (F) to wall. Attach bracket (vertically) to wall using
the long screw provided. Attach bracket (vertically) to furniture back
(directly below top) with short screw. Place bracket as close to center of
furniture back as possible in relation to wall stud and the desired position in
the room. Move furniture to its final position. Thread the strap through the
bracket, pull it tight.
Cleaning & Care
Treat surfaces with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
Wall
Long Screw
Short Screw
F
Loading...