Page 1
ASSEMBLY INSTRUCTION
295-2 LOVESEAT
Side Arm-Rsf
B
Side Arm-Lsf
CA
Seat Panel
D
Back Frame
1 pc
Front Stretcher
1 pc
I
JCBC Bolt
5/16" x 1"
4 pcs
M
Wood Screw
5mm x 38mm
1 pc
F GE
Seat Cushion
2 pcs
J
Flat Washer
1"
4 pcs
1 pc
Leg
4 pcs
K
Spring Washer
3/8"
4 pcs
1 pc
H
JCBC Bolt
5/16" x 2-1/4"
4 pcs
L
Allen Key
5 x 65mm
1 pc
4 pcs
This page lists all the contents included in
the box. Please take the time to identify the
hardware as well as the individual
components to this product. As you unpack
and prepare for assembly, place the
contents on a carpeted or padded area to
protect them from damage.
1
Page 2
Assemble Leg (G) into Side Arm-Rsf (A) & Side Arm-Lsf (B) by using JCBC Bolt (H) with Allen
1
Key (L).
B
A
G
H
L
Attach Back Frame (D) to the Side Arm-Rsf (A) & Side Arm-Lsf (B) by using brackets as
2
drawing below.
D
A
Ensure brackets are attached
tightly.
B
2
Page 3
Insert JCBC Bolt (I) through Spring Washer (K) & Flat Washer (J) to attach Front Stretcher (E)
3
with Side Arm-Rsf (A) & Side Arm-Lsf (B) and turn the bolts clockwise with Allen Key (L).
Adjust all bolts in well position then fully tighten.
E
A
JKIL
Put on Seat Panel (C) and use Wood Screw (M) to fix it as shown, then put on Seat Cushion
4
(F).
B
F
M
C
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
3
Loading...